Availability
On Sale
These AEM Electronics high-flow in-tank electric fuel pumps are designed for high performance, naturally aspirated, and forced induction EFI. They deliver reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The pumps include a rubber sleeve, end caps, a prefilter, hose, clamps, and flying lead.
( 50 )
$162.95
$105.95
On Sale
If you require additional outputs and/or upgraded hardware over existing sensors, AEM Electronics MAP sensor kits will put a smile on your face. Their quality construction and precision accuracy make them a perfect choice for demanding performance applications.
( 12 )
$87.15
$56.65
On Sale
AEM Electronics EGT thermocouples are economical and fast responding K-type thermocouples. They include a closed-tip TC sensor with a protective inconel sheath, 10 ft. extension wire, 1/8 in. NPT compression fitting, and ring and terminal harness. AEM EGT thermocouples are available individually or in 2- or 4-packs. Specs: * Maximum temperature: 1800 degrees F (982.2 degrees C) * Sheath length: 3 in./76.2mm * Sheath diameter: 0.125 in./3.18mm * Termination: Ring terminals * Wire length: 12 in. * Accuracy: Greater of 3.96 degrees F/2.2 degrees C or 0.75 percent
Not Yet Reviewed
$117.95
$64.95
On Sale
AEM universal flush mount panels make it easy to create a clean, custom look when installing your AEM CD-5 or CD-7 carbon digital dash display. The flush mount panels are manufactured from lightweight automotive-grade, vacuum-formed ABS plastic, and will create a flush to near flush installation when installed using the soft mounts that are supplied with your CD carbon digital dashes. AEM panels feature an automotive wrinkle finish—but are also paintable for enhanced customization! Features include: * Panels fits both original and flat panel versions of the CD-5 and CD-7 carbon dashes * Pre-drilled mounting holes for the CD dashes for perfect orientation * Panels measure 10 in. tall x 20 in. long providing plenty of additional material for custom trimming into an OE gauge cluster enclosure or a custom dashboard
( 1 )
$79.75
—
$82.79
$43.86
—
$45.53
On Sale
AEM Electronics shunt current sensors are versatile and reliable current sensors ideal for automotive EV (Electric Vehicle) applications. They offer high accuracy, digital output, and rugged construction, making them excellent choices for demanding environments where precision and reliability are essential. The Isabellenhutte shunt-based current sensors are capable of accurately measuring DC current, and are available with a measuring range of 1,000 or 2,500 amps. Both have a compact, lightweight design, making them easy to install in tight spaces. They are also highly configurable, with a range of options available for calibration, output scaling, and more, allowing for precise customization to meet the needs of your specific application. One of the key features of AEM Electronics shunt current sensors is their CAN bus 2.0a interface, which allows for easy integration with existing control systems. The interface provides digital output of the measured current, making it easy to incorporate into a variety of control and monitoring applications. Additional features: * Monitor batter stack voltage, intermediate circuit voltage, and relay functions * Temperature compensation and calibration * Galvanic isolation of 1000 V DC * Internally verified current measurement * Can be used on the high or low side of the battery
Not Yet Reviewed
$349.95
$192.95
On Sale
AEM Mini Master battery management systems are comprised of three components: 1. VCU 2. BMS-18 Mini Master 3. BMS-18 Satellite(s) The BMS is implemented as two different module types: the Mini Master and the Satellite. Each module is capable of measuring up to 18 cells and three temperatures (thermistors), but the Master also contains the CAN communication interface and J1772 charging specific connections needed for each battery pack. The VCU communicates with the BMS via the Mini Master module and all battery packs need at least one Mini Master unit. The Satellites expand the capability of the Master by an additional 18 cells and three thermistors per additional Satellite connected. The Satellite modules are connected to their Master via a high-speed serial interface (isoSPI) that allows additional units to be daisy chained together, adding as many Satellites as necessary for the battery pack configuration. The VCU is responsible for all BMS control logic. All setup and calibration items can be modified using the AEMCal user interface. Features: * Add-on expansion for VCU products, enabling the VCU's battery management features * Distributed BMS architecture allows for easy support of distributed battery packs * Interfaces with J1772 charge port to automatically power up vehicle when charge plug is connected * Up to 16 BMS18 Satellites can be connected to a single BMS18 Mini Master to support up to 1,200 V systems
Not Yet Reviewed
$284.95
$156.95
On Sale
AEM Electronics dual channel analog current sensors play a critical role in EV drive systems. Their job is to measure current in and out of the vehicle's high-voltage battery pack and report this data back to the VCU to be used for battery current limiting and management, as well as energy tracking. AEM dual channel hall-effect current sensors are offered in three amperages. Select the one needed for your application. Notes: * Dual Channel range ±75 amps for Channel 1 and: -- ±500 amps for Channel 2 -- ±750 amps for Channel 2 -- ±1000 amps for Channel 2 * Operating temperature range of -40 to 257 degrees F
Not Yet Reviewed
$118.95
$65.95
On Sale
AEM CD-7 plug-and-play adapter cables make CD dashes the perfect racing displays for track day enthusiasts who want to be able to see engine and vehicle data but are still running a factory ECU. For CD dash owners with CAN OBD-II who are already using the dash and receiving channels from a data logger or other CAN-enabled device, you can now add additional channels through the OBD connection with no additional wiring!
( 1 )
$40.28
$22.15
On Sale
AEM Electronics' CCU AC input connector plug and pin kits are the replacement connectors for their EV combined charging units. The kits contain a quick-connect, waterproof connector and are supplied with terminals, seals, and housings. For a proper fit and optimal performance, service your AEM EV CCU with their plug and pin kits.
Not Yet Reviewed
$59.89
$32.94
On Sale
AEM Electronics' CCU HVDC output connector plug and pin kits are the replacement connectors for their EV combined charging units. The kits contain a quick-connect, waterproof connector and are supplied with terminals, seals, and housings. For a proper fit and optimal performance, service your AEM EV CCU with their plug and pin kits.
Not Yet Reviewed
$76.25
$41.94
On Sale
HV (high-voltage) contactors are widely used in electric vehicles (EV) and hybrid electric vehicles (HEV). AEM Electronics offers a couple of choices in this area with their Rincon Power high-voltage contactors. One is a low-cost, pre-charge solution that meets RoHS 2011/65/EU and is PCB (printed circuit board) mountable. The other is hermetically sealed with gas fill and has an integrated coil economizer to reduce coil holding power. It meets RoHS 2011/65/EU, is CE certified, and IEC60947-4-1 compliant. Choose the one needed for your application.
Not Yet Reviewed
$56.65
$31.16
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
