Availability
AED has combined every possible add-on feature and incorporated it into each of these Ultimate Performance carburetor kits to give you longer-lasting and improved performance from your Holley carburetor. Most of the features that you would buy separately are already included. Features include: * High-flow needle and seats * Nylon reusable needle and seat gaskets * Nylon reusable bowl screw gaskets * New brass idle mixture screws * New needle and seat nuts and screws * New accelerator pump squirter check valves * Special no-leak fuel inlet gaskets * Non-stick bowl and metering gaskets
( 85 )
$46.99
—
$54.99
AED offers a complete selection of accelerator pump cam kits with varying opening rates and delivery volumes. They allow you to fine tune your accelerator pump requirements to your engine performance needs.
( 16 )
$25.79
AED Performance's fuel pressure gauges are hand-tested for accuracy on their fluid flow bench to ensure you receive precision and quality. The gauges feature a 1.5 in. diameter, chrome plated stainless steel bezel and a 1/8 in.-NPT fitting for easy installation. AED fuel pressure gauges are offered in liquid and non-liquid versions, as well as different psi ranges. Choose the AED fuel pressure gauge best suited for your setup.
( 30 )
$21.99
—
$35.79
Get all of the necessary fittings to keep your fuel system running properly. AED has fittings to adapt different sized fuel lines to bare Holley fuel bowls, as well as hose and banjo fittings for special applications. For cathedral or center pivot race bowls, AED offers #6 and #8 AN anodized and machined bowl fittings for braided fuel lines. For Holley 600 or side pivot style bowls, AED provides a straight outlet and a banjo-style fitting that swivels 360 degrees for extra air cleaner clearance.
( 13 )
$25.99
—
$30.79
If you've ever fine-tuned the vacuum secondary spring on your Holley carburetor, then you know what a pain it can be to keep disassembling the housing. These AED vacuum secondary quick-change kits with springs allow you to easily swap out vacuum advance springs for efficient tuning between rounds.
( 26 )
$30.79
AED offers these carburetor base gaskets in a choice of sizes. These gaskets are made from high-quality, thick composite material for a good seal.
Not Yet Reviewed
$30.79
When it's time to replace worn-out and corroded components on your carburetor, AED replacement hardware kits have all of the hard-to-find items that you need to get the job completed. These pieces are perfect for renewing your Holley or AED performance carburetor. AED replacement hardware kits include the pieces listed below, plus miscellaneous clips, pins, and hardware: * Bowl and pump nozzle screws * Pump cover and throttle plate screws * Base plate and idle mixture screws * Needle and seat nuts and screws * Idle speed position screw and spring * Sight plug screws and secondary connecting link
( 7 )
$35.79
Improve performance with AED jet extensions. Virtually all single carbureted drag cars need rear jet extensions. During acceleration and high g-forces, fuel is pushed to the rear-most portion of the float bowl, uncovering the jets and creating a lean condition, which reduces performance. AED's bored stainless steel extensions have a special half-moon shape that ensures plenty of fuel volume and clears the stock floats.
( 7 )
$40.79
With AED adjustable jet plates you can tune your vacuum secondary carburetor without buying multiple jet plates. Just remove the bowl and change jets like a conventional metering block. The advantage is that you can use all of your existing components like fuel lines and bowl screws and not increase the length of your carburetor. Great for multiple carb applications where carb length is a problem, these AED adjustable jet plates are machined from 6061 billet and are anodized for appearance and longevity.
( 11 )
$54.99
AED originally designed these Birchwood carb spacers for racing but soon discovered their benefits for street cars, eliminating the hot soak and vapor lock problems associated with high underhood temperatures. These Birchwood carb spacers by AED feature a special coating to promote sealing and offer a great look. They come available in 1/2 in. and 1 in. heights for different configurations to suit your needs.
( 10 )
$40.79
—
$59.99
AED offers activation switch and bracket kits for your 4150 or Dominator carburetor. Now you have a secure environment in which to activate your nitrous system at wide-open throttle. AED nitrous activation switch and bracket kits are machined from 6061 billet and anodized red to resist stress and look good every time that you pop the hood. AED uses a special microswitch that has three poles so that you can use the additional pole for another function that you want activated when you're running at the max. AED billet nitrous activation switch and bracket kits include all of the components that you need for an easy install.
( 7 )
$35.79
—
$40.99
AED offers a choice of accelerator pump kits to suit your needs. In cases where you need additional total squirter volume (big carburetor, tight converter, heavy car), AED pump kits come complete to provide the additional volume.
( 5 )
$40.79
AED non-stick metering block gaskets are durable gas and alcohol-resistant gaskets that can be reused several times without becoming tacky or leaving bits that need to be scraped off. These totally stick-resistant, blue fiber compound gaskets will make your carburetor tuneups a lot easier to manage.
( 6 )
$21.99
These tiny little items can make a big difference in the way that your carburetor runs. AED blank power valve restrictors are designed for the quick fine-tuning of your power valve. AED has the replacement components that you need for your carburetor.
( 3 )
$25.79
AED billet automatic transmission passing gear brackets help complete the customized look under your vehicle's hood. They feature CNC-machining with quality finishes that not only provide strength and durability—but also customized enhancement for your engine compartment. Designed for use with 4150-style GM throttle and spring bracket assemblies (6600, 6600BK, 6600R), AED billet transmission kickdown brackets include all the necessary mounting hardware.
( 2 )
$34.99
AED offers stock replacement floats for side-hung float bowls (600 style), and brass, nitrophyl, and duracron stock replacement floats for center-hung float bowls (double pumper). For racing, they offer specially modified nitrophyl floats for sideways mount, oval track, and drag race applications. These are a must in high G-force situations where maintaining a consistent fuel level is paramount. All racing floats are machined, weighted, and sealed.
( 6 )
$25.99
—
$35.79
Replace your worn-out bushings with these AED bronze throttle shaft bushings for smooth throttle operation and excellent wear resistance. These eight specially sized bronze bushings are knurled for leak prevention. AED bronze throttle shaft bushings are an excellent choice to do the job right.
( 2 )
$30.79
AED offers these easy-to-use, do-it-yourself adjustable air bleed kits for the quick fine-tuning of your fuel circuits, including idle, intermediate, high speed, and power valve channel. All necessary hardware is included.
Not Yet Reviewed
$40.79
For the quick fine-tuning of your power valve channel, AED offers these power valve restrictor kits. They offer precise, custom circuit enrichment and timing. These restrictor kits include a drill bit, tap, Allen wrench, and eight blank restrictors to improve your carburetor's performance.
( 1 )
$50.79
Nitrous pressure gauge kits from AED measure 0 to 1,500 lbs. of thrust and will insert into a NOS billet -AN bottle connector. Monitoring bottle pressure is a must for safe and maximum nitrous performance. Order the AED Nitrous pressure gauge kit with the matching manifold size for your application.
Not Yet Reviewed
$50.79
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
