Overview

Biondo DDI 1049 ELITE Mega Panels

Biondo Racing DDI 1049 ELITE Mega switch panels bring you the same performance and reliability of the original Mega Panel with the addition of Biondo's NEW Elite Relay Board! The main differences between a standard panel and an Elite panel are:

* Relays have been upgraded
* The Elite Board can shift an electric or air solenoid
* The Elite Board can handle 40 amps compared to standards 20 amps. The sleek and compact Switch Panel is the main part of the system and includes 6 labeled switches to control your car's most important functions.
* The unique starter button and premium grade switches combine a new age design with functionality.
* The ignition and fuel pump switches are dual position switches, while the fan/water pump, headlight/taillight,
and aux 1/aux 2 are all three position switches. It is made to easily fit into a dragster's dash, with the overall size similar to the overall size of the conventional switch panel.
* To simplify the wiring process, the Switch Panel plugs into the Elite Relay Board using the supplied heavy duty 8 ft. cable.

The Elite Relay Board is the "power distribution board" and was built with durability in mind. It's capable of handling a 100 amp load with the supplied 6-gauge wire that connects from the high current connector on the Board to the master cutoff switch. It also includes dedicated relays for each switch, with each relay including its own status indicator light to let you know which circuit is on, and a dedicated fuse assigned to it. The Elite Relay Board can handle up to 40 amps on any output. In the very unlikely event that even more current is required, two outputs can be connected together for up to 80 amps. It also features an unswitched fused 12 V output that can handle up to 40 amps. This output is also shut down when the panic button is pressed. (The panic/emergency post on the board allows you to directly connect a "panic button" which will quickly shut off the power to the car in case of an emergency.)

The Elite Relay Power Board has a Shift Output Controller that is only active when the ignition switch is on. The Shift Output Controller allows the driver to select whether to shift on time or RPM using a remotely mounted Select Switch (usually mounted on the dash). The Elite Relay Board also has three slide switches. An Output Control Switch to control whether the shift output will apply 12 V (N.O.) to shift or remove 12 V (N.C.) to shift and two Input Selector Switches used to tell the Elite Relay Board whether 12 V or ground is coming from the Shift Controllers. The relay board also includes the "Dual Select" feature which allows you to individually customize how to control each of the three position switches. For example; the switch on the Mega Panel labeled FAN / Water Pump turns on the fan and water pump in one position and the water pump in the other position. By turning on the Dual Select dip switch located on the relay board, you can change it so that the fan only is on in the fan position and the water pump only is on in the other position. The wiring kit includes enough color-coded wire, connectors, wire ties and a complete color-coded diagram to help you neatly wire a vehicle.

Features / Specifications:

* Mega Panel size: 8 in. x 3 1/4 in. x 1 3/4 in.
* Panel mounting holes 7 1/2 in. left to right, 2 3/4 in. top to bottom
* Relay Board size: 8 1/2 in. x 5 in. x 1 in.
* Complete color-coded wiring kit with connectors and color-coded diagram professionally wire your race car for years of trouble free racing.

Applications

Questions & Answers Ask a Product Question

Ask a Question

Reviews Write a Review