Overview

Racepak LDX Logger Dash Data Recorders

Racepak LDX Logger dash data recorders combine data acquisition with Racepak's advanced instrumentation! They also take full advantage of the capabilities of V-Net technology. In addition to the wiring harness that imports signals from the engine rpm, drive-shaft rpm, water temperature, oil pressure, and battery voltage, up to 32 optional sensors modules can be attached to the single V-Net network cable. This yields a total recording capability of 37 channels of data. The LDX Logger can record and upload to a PC the data from all of the monitored sensors, while at the same time displaying the input from up to 21 of those functions on the dash screen. With the simple push of a button, you can view the displayed functions by scrolling through four separate screen pages on the dash. Each page contains five user-programmable digital displays, plus the constant engine rpm bar graph. Selecting which functions will appear on each page is done through your Racepak Datalink software. The dash features output ports to connect a shift light and an external warning light. Shift points can be programmed using the screen of the dash or your software. You're also able to assign limits for the warning lights and the parameters for the dash-mounted mode buttons. Minimum and maximum levels that were attained during a recording can also be displayed. One full megabyte of memory provides a generous amount of recording time, while sample rates are programmable up to 100 per second per channel. Uploading data to a PC or laptop is accomplished through an included 6 ft. serial cable. The screen is backlit for nighttime use. Four threaded studs on the rear of the LDX Dash Logger facilitate mounting it to any flat surface.

Questions & Answers Ask a Product Question

Ask a Question

Reviews Write a Review