Overview

Rock Jock Antirock Sway Bar End Link Mounting Brackets

RockJock's Antirock sway bar end link mounting kit for 2021-up Broncos installs into the hole on the Bronco front lower control arm that the factory sway bar end link is removed from. This kit includes the billet steel end link mounts, the RH/LH specific rotational locks and the new nuts to tighten them up with. Fabricated from 1 1/4 in. steel bar stock, the mounts include various machined features, including bores in the sides of the mounts (that allow end link rod ends to bolt up with the rod end nut installed into the bore on the side of the mount), a wrench flat that accepts a 7/8 in. wrench, a double-D shaped machined hub that the RH and LH rotational locks fit onto, and 9/16 in.-18 RH threads on the bottom. Rotational locks are laser-cut and formed 1/8 in. steel; and the locking flange nuts feature 9/16 in.-18 threads. The finish on all components is clear zinc plating.

Kits include:

(2) Billet steel sway bar end link mounts (gold)
(1) LH mount rotational lock
(2) RH mount rotational lock
(2) 9/16 in.-18 locking flanged hex nuts

Billet end link mount specs.:

* 1018 steel construction
* 1 1/4 in. diameter (main body material)
* 3.525 in. tall
* 9/16 in.-18 RH threads – 1.50 in. long
* Wrench flat accepts a 7/8 in. wrench

Notes: Intended for use on the lower control arms of 2021-up Broncos.

Applications

Questions & Answers Ask a Product Question

Ask a Question

Reviews Write a Review