Selected Filters


Summit Racing™ Billet Distributors SUM-850050

Summit Racing™ Billet Distributors SUM-850050

SUM-850050

4.5 out of 5 stars ( 74 )

Part Number: SUM-850050

Estimated Ship Date: Today

$194.99

Results Found: 351

Make:
CHEVROLET
Model:
C10
Submodel:
BIG TEN
Beginning Year:
1978
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.0L/305
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
BIG TEN
Beginning Year:
1978
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.7L/350
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
BIG TEN
Beginning Year:
1978
Ending Year:
1980
Engine Type:
V8
Engine Size:
7.4L/454
Engine Family:
Chevy big block Mark IV
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
CHEYENNE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.7L/350
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
CHEYENNE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
7.4L/454
Engine Family:
Chevy big block Mark IV
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
CHEYENNE
Beginning Year:
1976
Ending Year:
1980
Engine Type:
V8
Engine Size:
6.6L/400
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
CHEYENNE
Beginning Year:
1977
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.0L/305
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
CUSTOM DELUXE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.7L/350
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
CUSTOM DELUXE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
7.4L/454
Engine Family:
Chevy big block Mark IV
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
CUSTOM DELUXE
Beginning Year:
1976
Ending Year:
1980
Engine Type:
V8
Engine Size:
6.6L/400
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
CUSTOM DELUXE
Beginning Year:
1977
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.0L/305
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
SCOTTSDALE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.7L/350
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
SCOTTSDALE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
7.4L/454
Engine Family:
Chevy big block Mark IV
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
SCOTTSDALE
Beginning Year:
1976
Ending Year:
1980
Engine Type:
V8
Engine Size:
6.6L/400
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
SCOTTSDALE
Beginning Year:
1977
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.0L/305
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
SILVERADO
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.7L/350
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
SILVERADO
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
7.4L/454
Engine Family:
Chevy big block Mark IV
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
SILVERADO
Beginning Year:
1976
Ending Year:
1980
Engine Type:
V8
Engine Size:
6.6L/400
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
SILVERADO
Beginning Year:
1977
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.0L/305
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10 SUBURBAN
Submodel:
CUSTOM DELUXE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.7L/350
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10 SUBURBAN
Submodel:
CUSTOM DELUXE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
7.4L/454
Engine Family:
Chevy big block Mark IV
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10 SUBURBAN
Submodel:
CUSTOM DELUXE
Beginning Year:
1977
Ending Year:
1979
Engine Type:
V8
Engine Size:
5.0L/305
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10 SUBURBAN
Submodel:
SCOTTSDALE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.7L/350
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10 SUBURBAN
Submodel:
SCOTTSDALE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
7.4L/454
Engine Family:
Chevy big block Mark IV
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10 SUBURBAN
Submodel:
SCOTTSDALE
Beginning Year:
1977
Ending Year:
1979
Engine Type:
V8
Engine Size:
5.0L/305
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.

Call now to speak with a sales specialist!

Call Now!

1-800-230-3030