Selected Filters


Summit Racing™ Billet Distributors SUM-850050

Summit Racing™ Billet Distributors SUM-850050

SUM-850050

4.5 out of 5 stars ( 74 )

Part Number: SUM-850050

Estimated Ship Date: Today

$194.99

Results Found: 253

Make:
CHEVROLET
Model:
BEL AIR
Submodel:
BASE
Beginning Year:
1975
Ending Year:
1975
Engine Type:
V8
Engine Size:
5.7L/350
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
BEL AIR
Submodel:
BASE
Beginning Year:
1975
Ending Year:
1975
Engine Type:
V8
Engine Size:
6.6L/400
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
BEL AIR
Submodel:
BASE
Beginning Year:
1975
Ending Year:
1975
Engine Type:
V8
Engine Size:
7.4L/454
Engine Family:
Chevy big block Mark IV
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
CHEYENNE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.7L/350
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
CHEYENNE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
7.4L/454
Engine Family:
Chevy big block Mark IV
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
CUSTOM DELUXE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.7L/350
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
CUSTOM DELUXE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
7.4L/454
Engine Family:
Chevy big block Mark IV
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
SCOTTSDALE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.7L/350
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
SCOTTSDALE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
7.4L/454
Engine Family:
Chevy big block Mark IV
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
SILVERADO
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.7L/350
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10
Submodel:
SILVERADO
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
7.4L/454
Engine Family:
Chevy big block Mark IV
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10 SUBURBAN
Submodel:
CUSTOM DELUXE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.7L/350
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10 SUBURBAN
Submodel:
CUSTOM DELUXE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
7.4L/454
Engine Family:
Chevy big block Mark IV
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10 SUBURBAN
Submodel:
SCOTTSDALE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.7L/350
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10 SUBURBAN
Submodel:
SCOTTSDALE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
7.4L/454
Engine Family:
Chevy big block Mark IV
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10 SUBURBAN
Submodel:
SILVERADO
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.7L/350
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C10 SUBURBAN
Submodel:
SILVERADO
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
7.4L/454
Engine Family:
Chevy big block Mark IV
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C20
Submodel:
CHEYENNE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.7L/350
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C20
Submodel:
CHEYENNE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
7.4L/454
Engine Family:
Chevy big block Mark IV
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C20
Submodel:
CUSTOM DELUXE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.7L/350
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C20
Submodel:
CUSTOM DELUXE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
7.4L/454
Engine Family:
Chevy big block Mark IV
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C20
Submodel:
SCOTTSDALE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.7L/350
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C20
Submodel:
SCOTTSDALE
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
7.4L/454
Engine Family:
Chevy big block Mark IV
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C20
Submodel:
SILVERADO
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
5.7L/350
Engine Family:
Chevy small block Gen I
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.
Make:
CHEVROLET
Model:
C20
Submodel:
SILVERADO
Beginning Year:
1975
Ending Year:
1980
Engine Type:
V8
Engine Size:
7.4L/454
Engine Family:
Chevy big block Mark IV
Application Notes:
Distributor drive gear is compatible with flat tappet or hydraulic roller cams. 0.500 in. distributor shaft. This is not a ready to run distributor. This needs an OEM or aftermarket ignition control box. Ignition control boxes that are compatible can be found in the required parts tab.