Filters

Selected Filters

Applications for SUM-850021

Summit Racing™ Blueprinted HEI SBF Distributor SUM-850021

Summit Racing™ Blueprinted HEI SBF Distributor SUM-850021

SUM-850021

4.25 out of 5 stars ( 79 )

Part Number: SUM-850021

Estimated Ship Date: Tomorrow

$204.99

Back to Part Detail
Applications

Filters

Results Found: 42

Make:
FORD
Model:
BRONCO
Submodel:
BASE
Beginning Year:
1969
Ending Year:
1972
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
BRONCO
Submodel:
WAGON
Beginning Year:
1969
Ending Year:
1973
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
COUNTRY SEDAN
Submodel:
BASE
Beginning Year:
1969
Ending Year:
1974
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
COUNTRY SQUIRE
Submodel:
BASE
Beginning Year:
1969
Ending Year:
1974
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
CUSTOM 500
Submodel:
BASE
Beginning Year:
1969
Ending Year:
1974
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
CUSTOM
Submodel:
BASE
Beginning Year:
1969
Ending Year:
1972
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
E-100 ECONOLINE
Submodel:
BASE
Beginning Year:
1969
Ending Year:
1975
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
E-100 ECONOLINE
Submodel:
CLUB WAGON
Beginning Year:
1969
Ending Year:
1974
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
E-200 ECONOLINE
Submodel:
BASE
Beginning Year:
1969
Ending Year:
1974
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
E-200 ECONOLINE
Submodel:
CHATEAU WAGON
Beginning Year:
1971
Ending Year:
1972
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
E-200 ECONOLINE
Submodel:
CLUB WAGON
Beginning Year:
1969
Ending Year:
1974
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
E-200 ECONOLINE
Submodel:
CUSTOM WAGON
Beginning Year:
1970
Ending Year:
1974
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
E-300 ECONOLINE
Submodel:
BASE
Beginning Year:
1969
Ending Year:
1974
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
E-300 ECONOLINE
Submodel:
CHATEAU WAGON
Beginning Year:
1970
Ending Year:
1974
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
E-300 ECONOLINE
Submodel:
CLUB WAGON
Beginning Year:
1969
Ending Year:
1974
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
E-300 ECONOLINE
Submodel:
CUSTOM WAGON
Beginning Year:
1971
Ending Year:
1972
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
F-100
Submodel:
BASE
Beginning Year:
1969
Ending Year:
1974
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
GALAXIE 500
Submodel:
BASE
Beginning Year:
1969
Ending Year:
1974
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
LTD
Submodel:
BASE
Beginning Year:
1969
Ending Year:
1974
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
LTD
Submodel:
BROUGHAM
Beginning Year:
1970
Ending Year:
1974
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
MAVERICK
Submodel:
BASE
Beginning Year:
1971
Ending Year:
1977
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
MUSTANG
Submodel:
BASE
Beginning Year:
1969
Ending Year:
1973
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
MUSTANG
Submodel:
GRANDE
Beginning Year:
1970
Ending Year:
1973
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
MUSTANG
Submodel:
MACH 1
Beginning Year:
1970
Ending Year:
1973
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.
Make:
FORD
Model:
RANCHERO
Submodel:
500
Beginning Year:
1969
Ending Year:
1974
Engine Type:
V8
Engine Size:
5.0L/302
Engine Family:
Ford small block Windsor
Application Notes:
Will not clear a Victor Jr. intake manifold. Shaft diameter of this distributor is 0.490 in. Distributor gear is compatible with hydraulic or mechanical flat tappet and austempered ductile iron hydraulic roller camshafts. The gear is surface hardened only and not compatible with factory steel hydraulic roller camshafts. Power pigtail is not included.