Overview

FiTech Go EFI 4 600 HP System/Go Spark Fuel Injection Master Kits

FiTech Go EFI 4 600 hp system/Go Spark fuel injection master kits are inclusive EFI kits with fuel delivery solutions, plus an upgrade to high-powered sparks for improved combustion and power output. In these master kits, FiTech mates their Go EFI 4 TBIs with their Go-Spark CDI ignition and either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI.

The Go EFI 4 system is ideal for everyday drivers to weekend cruisers or even bracket cars making up to 600 hp, and easily fits any 4-barrel intake manifold. Thanks to the built-in ECU, MAP sensor, and fuel pressure regulator, wiring is kept to just a few connections for an easy install. The quick self-learning technology that FiTech is known for, combined with their wet annular discharge design, will have your engine fired up and idling smoothly in minutes. A touch screen handheld controller, cable and windshield
mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info is supplied. The throttle bodies are available in different finishes. Choose the master kit with your preferred finish and fuel delivery solution.

Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors.

Fuel delivery options:

* Go Fuel in-tank pump modules are offered in different styles, including regulated versions, and in different flow rates. They include gaskets, terminals, and clamps.

*Go Fuel single fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware.

* Go EFI in-line pump kits provide a FiTech heavy-duty pump with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.

Applications

Questions & Answers Ask a Product Question

Ask a Question

Reviews Write a Review