CHRYSLER | Summit Racing

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.03 out of 5 stars ( 38 )

$1,349.95

—

$1,449.95

Holley Sniper 2 EFI Fuel Injection Upgrade Kits

Want to make the switch from the original Sniper EFI to Sniper 2 and don't want to rewire your system? The new Holley Sniper 2 fuel injection upgrade kits are designed to do exactly that! Included with each Sniper 2 plug-and-play upgrade system is an adapter solution that connects your existing Sniper EFI wiring harness to a Sniper 2 throttle body in minutes. Simply remove your Sniper EFI throttle body from the intake manifold, unplug all connectors, reinstall the Sniper 2 throttle body, and plug the Sniper EFI 2 adapter harness into your existing main harness. Cycle your ignition key, run a fresh wizard on the display of your choice, and enjoy the benefits of Sniper 2 EFI. The #1 EFI conversion system just got better! Introducing Sniper 2 EFI—a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion simpler, more reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will self-tune with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Four total upgrade kits are available: polished and black, with or without external fuel pressure regulator (required for Sniper 2). Upgrade kit features: * Update your Sniper EFI to the new, improved Sniper 2 in less than one hour! * Eliminates the need to rewire your existing installation; one step, plug-and-play upgrade to a Sniper 2 * Improve your ride with the Sniper 2, including wireless connectivity, smooth throttle feel, improved RF resistance, and a hidden wiring harness. * Reuses existing coolant temperature and oxygen sensors * Female -6 AN O-ring fittings for a tight seal * Overall height is only 3.280 in. to fit under most hoods * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI of regulated fuel supply * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Sniper 2 is part of the Sniper EFI complete ecosystem * Available with fuel system kits: that include an adjustable external regulator, fittings, and a 3 ft. section of fuel hose, allowing you to easily mount your regulator in the engine bay Additional NEW features: * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

3.73 out of 5 stars ( 26 )

$1,099.95

—

$1,499.95

Melling AFM/MDS Delete Combo

Melling offers their engine cylinder deactivation kits for converting active fuel management engines to non-active fuel management versions. These AFM (active fuel management) or MDS (multi-displacement system) delete combos include a variety of components to help complete the changeover. Order the Melling AFM/MDS delete combo best suited for your application. Each kit includes: * MDS delete camshaft (1) * Non-MDS hydraulic roller lifters (16) * Lifter guides for Non-MDS engines (4) Application dependent components include: * AFM/MDS solenoid plugs (4) * Camshaft thrust plate (1) * Variable Valve Timing (VVT) oil control valve (1) Notes: * When installing a delete cam, the active fuel management lifters must be replaced using non-active fuel management lifters. * The valve lifter guides used in non-active fuel management engines differ from those used in active fuel management engines and must be replaced for this application. * The AFM/MDS solenoids must be replaced using non-MDS plugs. * The vehicle engine control module/powertrain control module must be reprogrammed to turn off the active fuel management system in the operating software. * Pushrod length must be checked during installation to verify the correct length.

4.57 out of 5 stars ( 7 )

$1,355.99

—

$1,394.99

Trick Flow® PowerPort® 190 Cylinder Heads for Small Block Mopar

Trick Flow® PowerPort® 190 cylinder heads for small block Mopar engines are made from A356-T61 aluminum because it's much lighter but every bit as strong as cast iron. The intake runners have been enhanced to increase airflow, and both intake and exhaust runners feature Trick Flow's® special CNC Street Ported treatment that combines premium-quality CNC machining with a standard resolution finish that's perfect for making more power. That's not all! Newly designed rocker arm shaft mounting bosses are stronger than the OE design, and larger diameter pushrod holes have been incorporated to accommodate 3/8 in. pushrods for use with flat tappet and hydraulic roller camshafts. Bronze alloy valve guides, ductile iron valve seats, and multi-angle valve seats further increase performance and durability. Assembled cylinder heads include premium 11/32 in. stainless steel valves, Trick Flow by PAC Racing® valve springs, steel valve stem locks—and have chromoly and titanium retainer options. The heads fit all non-emissions 318, 340, and 360 engines found in many Chrysler vehicles from 1967-2003. You read that right: these heads fit both LA and Magnum-series engines, giving builders a truly "best of both worlds" scenario. That means Magnum builders can use readily available LA engine parts such as intake manifolds and valve covers. PowerPort® 190 cylinder heads are available fully assembled or as bare castings; sold separately. Order the model recommended for your year/make and engine application.

4.69 out of 5 stars ( 16 )

$1,329.99

—

$1,449.99

Summit Racing™ Gen III Hemi MDS Delete Kits

Wanting to deactivate the Multi-Displacement System of your Hemi vehicle will require a few things, including a non-MDS camshaft and components. Summit Racing™ Gen III Hemi MDS delete kits are offered in versions designed for engines with or without Variable Valve Timing (VVT). They contain premium components (except programmer) to help you complete the job. Each Summit Racing™ delete kit will include a head gasket set, timing cover gasket, non-MDS lifters, replacement cylinder head fasteners, non-MDS solenoid plug, and camshaft, along with valve springs and/or camshaft phaser limiters. Choose the combo designed for your vehicle.

4.75 out of 5 stars ( 4 )

$1,396.90

—

$1,435.80

Quick Fuel SS-Series Carburetors

These Quick Fuel SS-Series carburetors are designed to offer the power of a race carburetor in a streetable package that weighs 5 lbs. less than other carburetors. Manufactured completely from aluminum, they allow you to change the idle feed and offer power valve channel restrictions and idle and high-speed air bleeds for the ultimate in tunability. The solid-state, electric-choke Quick Fuel SS-Series carburetors have billet throttle bodies, billet metering blocks, 4-corner idle systems, secondary jet extensions, and notched secondary floats. The vacuum secondary carburetors feature fuel bowls with a single-sight glass window, while the mechanical secondary carburetors have dual-inlet, dual-sight glass 4500-style fuel bowls and include additional links to tune the secondary opening rate. Quick Fuel has done it--they've created all-aluminum Super Street carburetors that are perfect for your high performance street machine.

4.35 out of 5 stars ( 49 )

$1,024.95

Edelbrock Performer RPM Cylinder Heads

Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.

4.21 out of 5 stars ( 179 )

$1,065.99

—

$1,179.99

Edelbrock EZ-Street EFI Systems

Engineered to provide an affordable and user-friendly upgrade for any V8 engine originally equipped with a carburetor, these EZ-Street EFI system seamlessly integrate cutting-edge technology with traditional styling. Capable of supporting up to 650 horsepower, the EZ-Street EFI system combines advanced annular fuel distribution with modern CAN communication protocols to provide reliable, high-performance results in a simplified package. The four-barrel aluminum throttle body design mounts to any intake manifold with a standard 4150-style flange and accepts a traditional round air cleaner, just like a classic carburetor. Each unit arrives fully preassembled and pressure-tested, complete with integrated injectors, throttle position and manifold sensors, fuel rails, linkage, and a Bosch 4.9 wideband oxygen sensor. It also includes an ECU, a high-quality wiring harness with a simple 4-wire hookup, and detailed installation instructions. EZ-Street features closed-loop, self-learning fuel technology, with a calibration wizard to make initial startup simple; no need for custom tuning or a laptop. The included EZ-Street Bluetooth Tuner App, available for Download on Android or IOS allows users to configure the system, adjust settings, and monitor performance through intuitive preprogrammed dashboards. Data logging, fuel control, and dual electric fan management are all accessible directly from the easy-to-use app on your smartphone or tablet. Beyond fuel delivery, the EZ-Street EFI offers the option of fully programmable ignition control, enabling optimized performance and improved fuel efficiency. When paired with a Pro-Tuner distributor (sold separately), the EZ-Street EFI can deliver fully integrated timing control at the touch of your fingers. With an internal coil driver and compatibility across most HEI distributors, ready-to-run distributors, and CDI boxes, the system eliminates the need for separate ignition modules. Timing control features require the use of a Edelbrock Pro-Tuner distributor for full functionality to be enabled. Features include: * Choice of three calibrations offers great out of the box performance even with big camshafts * 4150 style Throttle Body Fuel Injection fits most domestic V8 engines * Optional spark control * Airflow rate:1,000 cfm * Mounting hardware included * Works with any fuel system that provide a minimum of 58 psi

5.0 out of 5 stars ( 1 )

$1,297.95

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.42 out of 5 stars ( 12 )

$1,449.95

Holley Sniper EFI HyperSpark Distributor Kits

Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation

4.33 out of 5 stars ( 27 )

$1,049.95

—

$1,065.95

Borgeson Power Steering Conversion Kits

Borgeson power conversion kits steer you in the right direction. With true modern power steering feel and feedback, these kits also offer sporty ratios to equip your classic ride with up-to-date precision. Borgeson power conversions are bolt-on kits available for both factory manual and power steering cars. They include re-manufactured integral power steering gearboxes designed to bolt to your stock mounting locations. So, whether you want to convert your manual steering or update your old factory power steering, Borgeson offers a no-cut, no-weld, no-loss of turning radius solution.

4.3 out of 5 stars ( 129 )

$1,144.70

—

$1,144.99

Quick Fuel Q-Series 4-Barrel Carburetors

Get big-time performance with Quick Fuel Q-Series 4-barrel carburetors with high-flow main bodies, which include either down-leg or annular boosters, screw-in idle and high-speed air bleeds, accelerator pump discharge nozzles, and a blended venturi area. These carburetors have CNC-machined billet metering blocks with 4-stage emulsion to provide more precise fuel metering, improve throttle response, and give a more uniform fuel performance curve. With so many great benefits and their blend of performance and drivability, it's no wonder that these Quick Fuel Q-Series carburetors are the popular choice. So, go ahead--throttle it up with Quick Fuel!

4.74 out of 5 stars ( 50 )

$1,126.95

—

$1,499.95

McLeod RXT Street Twin Clutch Kits

McLeod RXT Street Twin clutch kits are ideal for the extreme horsepower enthusiast who wants performance and economy. Capable of handling up to 1,000 hp, the RXT Street Twin clutches are for those who've kicked it up another notch—but still require streetability. The ceramic facing on the clutch discs provides slightly aggressive engagement with a soft pedal effort, making these clutches suitable for most street performance enthusiasts. Match your vehicle specs to the correct model from McLeod. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Available with dedicated flywheel or adapter ring for factory flywheel * CNC-machined and anodized flywheel adapter ring * Smooth engagement with excellent release qualities * Ceramic facings on disc increase holding power over similar organic linings * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability

4.69 out of 5 stars ( 48 )

$1,050.00

—

$1,050.99

Summit Racing™ Stock Spindle Drum-to-Disc Brake Conversion Kits

Improve your classics brake system performance and reliability by swapping your drum brakes to disc. The Summit Racing™ stock spindle drum-to-disc brake conversion kits have everything you need to mount factory style 4-piston calipers to the original drum brake spindles. No need for new spindles, ball joints, or the additional labor to install. The kits are a direct bolt-on with zero fabrication, cutting, drilling or welding required. All new, high-quality, precision machined components are used to provide a perfect fit and factory appearance. Both manual or power options are available, as well as wheel-only kits with no booster or master cylinder. Summit Racing™ also offers versions that upgrade to cross-drilled and slotted rotors, plus braided hoses. Select the stock spindle drum-to-disc brake conversion kit for your application needs.

4.1 out of 5 stars ( 21 )

$1,149.97

—

$1,319.97

McLeod RST HD Street Twin Clutch Kits

Need a clutch that can handle big horsepower without turning your commute into leg day at the gym? The McLeod RST HD Street Twin Clutch Kits give performance street machines the extra holding power they need while keeping engagement smooth and street friendly. Built to bridge the gap between McLeod's popular RST and RXT twin-disc systems, the RST HD clutches feature dual hybrid friction discs. One disc side features full-face organic material for clean, predictable engagement and long-lasting durability under repeated street and strip use. The other side has a segmented ceramic facing that provides increased bite and enhanced holding power during full throttle blasts. This dual compound combination makes RST HD clutches a smart choice for high-horsepower cars that pull double duty on the street and strip. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Bolts to most OEM flywheels or available with steel or aluminum flywheel * Smooth engagement with excellent release qualities

Not Yet Reviewed

$1,025.00

McLeod RXT HD Twin Disc Clutch Kits

Intended for the high horsepower street/strip fan, the McLeod RXT HD twin disc clutch kit is able to handle 1300hp, this clutch can handle serious horse-power and still remain street-able. Ceramic lined clutch discs will provide smooth engagement with a moderate pedal effort to make this clutch kit ideal for the street performance enthusiast. This clutch is perfect for the person that wants the best of both worlds.

5.0 out of 5 stars ( 12 )

$1,295.00

—

$1,295.99

Edelbrock Victor II EFI Chrysler HEMI Intake Manifolds

Edelbrock Victor II EFI Chrysler HEMI intake manifolds are designed for the later model Eagle or WT versions of Chrysler 5.7L, 6.1L, and 6.4L Gen III HEMI passenger car engines (with stock fuel injectors). They are similar in design to the early factory 6.1L SRT models but incorporate a wider plenum with long tapered runners, increasing airflow to the head, and relocated injector bosses to decrease port restriction. The front inlet accepts stock 80mm or Hellcat 92mm OEM throttle bodies and features the 5.7L/6.1L throttle body location/orientation. Edelbrock Victor II EFI Chrysler HEMI intake manifolds will clear most hoods without modifications and provide increased horsepower over stock units. Additional information: * Nitrous bosses added along the near-vertical runners * OEM or OE-style replacement air intake system must be used on 5.7L/6.1L engines. The 6.4L engines require OEM or OE-style 6.1L intake systems (without intake runner control valve) as stock and aftermarket 6.4L air intake systems will not fit * EDL-3647 fuel rail and hose kit are required for installation (sold separately) * Calibration required after installation * Not intended for use on Dodge/Ram trucks

4.88 out of 5 stars ( 8 )

$1,279.95

COMP Cams Sportsman Solid Roller Lifters

COMP Cams Sportsman solid roller lifters feature premium-quality, high-value components designed for sportsman and professional racing, along with high-end street machines. They're available in both needle-bearing and bushing configurations. Each design features two pressurized EDM oil feeds, as well as an edge-orifice feed to the wheel. This delivers a more reliable oil feed than most competing options. COMP Cams Sportsman solid roller lifters are also designed with a shallower oil band than competitors' versions for increased strength and rigidity, while internal machining helps to reduce weight. The body utilizes a skirted wheel that strengthens the lifter ears, and the skirt also provides more contact area with the lifter bore for further lifter stabilization. In addition, staked axles eliminate clips and provide robust axle retention. This feature increases the stiffness of the lifter ears and helps to prevent the ears from spreading. The COMP Cams Sportsman solid roller lifters are built from 8620 premium steel for increased strength and wear resistance and they feature a captured, stainless steel link bar design. The lifters also utilize a tapered and slotted link bar tower for reduced weight and improved aesthetics. Choose the size and options tailored for your engine application.

4.78 out of 5 stars ( 9 )

$1,318.95

—

$1,376.95

Lakewood Safety Bellhousings

Lakewood safety bellhousings are designed for maximum performance and durability. They are cut on CNC 5 axis laser cutters rather than plasma cutters to improve finish quality, reduce heat damage and warpage from the plasma cutter, improve speed of manufacture, and make them all exactly the same. All bellhousings feature a scalloped plate on the bottom of the transmission surface made from G70 grade steel (70,000) psi which will help eliminate stripping the transmission bolts. The engine plates are made of H60 grade material and the bells are roto-brated after welding to relive any stresses created from the hydro forming, annealing, or welding process prior to machining and painting. The roto-brating process also closes the metal on the outer surface making them stronger. Ever wonder how the SFI tests bellhousings like these Lakewood safety bellhousings? First, they bolt the bellhousing to a machine with a cast iron flywheel and saw inside it. Then they spin the flywheel, causing the saw to cut through it until it explodes. If the bellhousing can contain the explosion, the bellhousing is approved. These safety bellhousings are a safeguard to minimize the destructive effects of such an explosion. Don't take unnecessary chances with your safety and the safety of innocent bystanders--Lakewood not only provides top-notch products, they also provide peace of mind.

4.47 out of 5 stars ( 51 )

$1,349.95

Wilwood Forged Dynalite Big Brake Front Brake Kits

With Wilwood Forged Dynalite Big Brake front brake kits, you'll be ready for show, street, or strip! Track-ready performance and high-tech style come with oversized rotors, forged billet Dynalite calipers, and high performance Wilwood SmartPads. These front brake kits are fully compatible with OE master cylinder output. Options for the caliper finish and rotor design make it simple to match the brake response and style preferences on all types of daily drivers, race vehicles, and ultra-styled show machines! The choice is yours for big stopping power--choose Wilwood Forged Dynalite Big Brake front brake kits.

4.63 out of 5 stars ( 136 )

$1,079.71

—

$1,288.91

COMP Cams HRT Stage 1 Camshafts

COMP Cams HRT Stage 1 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads. All HRT Stage 1 camshafts do not require upgraded valve springs.

5.0 out of 5 stars ( 1 )

$1,298.95

—

$1,298.99

LEED Brakes Front Disc Brake Conversion Kits

LEED front disc brake conversion kits add the safety, reliability, and performance of disc brakes to your vehicle. These kits are a direct bolt-on and precision-machined.

4.33 out of 5 stars ( 79 )

$1,385.99

COMP Cams HRT Stage 2 Camshafts

COMP Cams HRT Stage 2 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads.

4.0 out of 5 stars ( 1 )

$1,284.99

—

$1,298.95

Hughes Performance Street/Strip 35 Series Torque Converters

If you've got a daily driver that you race on the weekends, and are in need of an excellent torque converter, then look no further. Hughes street/strip 35 Series torque converters are perfect for weekend racing and high performance street use. These converters are brazed and feature a strengthened sprag, special cut stator, and full needle bearings on the front and rear. Whether you're cruisin' down the highway or flying down the track, these converters get the job done.

3.5 out of 5 stars ( 4 )

$1,058.99

—

$1,468.99

CHRYSLER Parts and Accessories