Instruction Sheets for Part Number NAL-10067353
Technical Articles for Part Number NAL-10067353
Not Available
Chevrolet Performance 350 C.I.D. Base Engine Assemblies
Engine Assembly, Crate Engine, Chevy 350, 2-Piece Rear Main Seal, Intended for Manual Transmissions, as Pilot Bearing is installed, Each
See More Specifications
Overview
Chevrolet Performance 350 C.I.D. Base Engine Assemblies
Gen 1 5.7L crate engines are excellent entry-level performance engines for older cars, trucks, and street rods. All of the parts in these engines are brand new. These Chevrolet Performance Goodwrench 5.7L/350 c.i.d. engines have approximately 8.5:1 compression with a horsepower rating of 249 hp and 304 ft.-lbs. of torque. These crate engines have a 4.00 in. bore and a 3.48 in. stroke with 4-bolt mains and 2-piece rear main seals.
Camshaft specifications are .390 in. intake lift and .410 in. exhaust lift. The open duration is 195 degrees intake and 202 degrees exhaust at .050 in. with a 112 degree lobe separation. The cylinder heads are cast iron with 1.94 in. intake valves and 1.50 in. exhaust valves, 76cc combustion chambers, and 7-bolt style exhaust flanges. These engines include painted valve covers, oil pans, and timing covers. They are drilled for both left hand and right hand dipsticks.
When installed in the following vehicles, these engines carry a 36-month or 100,000-mile warranty:
* 1975-78 Chevy/GMC pickup (C1)
* 1975 Chevy/GMC Blazer, Jimmy (C1)
* 1975 Chevy/GMC van (G1)
* 1978-80 Chevy/GMC van (G2,3)
* 1979-85 Chevy/GMC pickup, Suburban, Blazer, Jimmy (K1)
* 1979-80 Chevy/GMC pickup, Suburban, Blazer, Jimmy (CK1)
* 1979-80 Chevy/GMC Suburban (CK 1, 2)
* 1979-85 Chevy/GMC Suburban (CK 1)
* 1980-85 Chevy/GMC van (G1, 2, 3)
* 1981-82 Chevy/GMC pickup (CK1)
* 1983-85 Chevy Caprice Classic, Impala (B)
* 1973-80 Chevy Corvette (Y)
* 1984-85 Pontiac Parisienne (B)
If this engine is installed in any other application, it has a 12 month or 12,000-mile warranty (parts only, no labor).
Dyno test numbers are from an independent test as reported by Hot Rod Magazine using a GM cast iron Quadrajet intake, Quadrajet carburetor, HEI distributor and 1-5/8 in. long tube headers.
Questions & Answers
Ask a Question
What type of question would you like to submit?
Reviews Write a Review
Instructions & Calculators
Instruction Sheets for Part Number NAL-10067353
Technical Articles for Part Number NAL-10067353
Some parts are not legal for use in California or other states with similar laws / regulations
Modal Header
Call To Order
This is a custom order part. You can order this part by Contacting Us.