Instruction Sheets for Part Number NAL-12568758
Technical Articles for Part Number NAL-12568758
Part Number: NAL-12568758
Not Available
Chevrolet Performance 350 C.I.D. VIN Code K Long Block Crate Engines
Engine Assembly, Crate Engine, TBI EFI Truck Replacement, Chevy 350 Goodwrench, 2-Bolt Main, Each
See More Specifications
Overview
Chevrolet Performance 350 C.I.D. VIN Code K Long Block Crate Engines
Direct from Chevrolet Performance come the GM GoodWrench replacement long block crate engines! They're 5.7L 350 c.i.d. assemblies for 1987-95 Chevy/GMC trucks with 350 VIN code "K" engines up to 7,200 GVRW. These are 2-bolt mains with one-piece rear seal factory replacement crate engines.
Engine specs:
* 1986 and up 2-bolt main one-piece crankshaft seal block (no mechanical fuel pump provision)
* Horsepower: 200 hp at 4,000 rpm
* Torque: 300 lbs.-ft. at 2,800 rpm
* Nodular iron crankshaft
* Powdered metal connection rods
* Dished hypereutectic pistons
* 9.25:1 compression ratio
* High-volume oil pump
* Morse link-type timing chain
Camshaft specs:
* Flat tappet hydraulic camshaft
* Intake lift .382 in.
* Exhaust lift .402 in.
* Intake duration at .050: 165.9
* Exhaust duration at .050: 174.8
* Lobe center separation: 111.9
* Camshaft mechanical specs
* Intake valve opens at -30.2 BTDC, closes at 16.1ATDC; intake lobe centerline: 111.8
* Exhaust valve opens at 18.1BBDC, closes at -23.3 ATDC; exhaust lobe centerline: 111.8
Cylinder head specs:
* Casting number 14102193
* Swirl port intake port design
* 64cc combustion chamber
* 1.94 in. intake valve, 1.50 in. exhaust valve
* Valve spring part number is 3911068 (same spring used with the old 300 hp 350 crate engine)
* Installed height 1.70 in. pressure at installed height is 80 lbs.; pressure with valve open is 267 lbs.
* These springs are good for .550 in. lift, but clearance between guide and retainer must be double-checked before attempting
* 7-bolt exhaust flange
* Centerbolt valve cover flange
* 1987-95 intake manifold bolt pattern with center intake bolts canted at 72 angle
* This is not a performance-oriented cylinder head. It is classified as a high swirl head intended for good bottom-end torque and fuel economy. The intake runner is restrictive because it has a ramp cast into the bottom of the bowl to promote high swirl.
Engine also includes:
* 4 qt. oil pan (5w/filter)
* Timing cover
* 8 in. balancer
* Valve covers
* It is recommended that you do not attempt to run this engine in a carbureted application because of the lack of a fuel pump provision. Special intake manifold is required.
Questions & Answers
Ask a Question
What type of question would you like to submit?
Reviews Write a Review
Instructions & Calculators
Instruction Sheets for Part Number NAL-12568758
Technical Articles for Part Number NAL-12568758
Some parts are not legal for use in California or other states with similar laws / regulations
Call To Order
This is a custom order part. You can order this part by Contacting Us.