Availability
Showing In Stock Items. Show All Items.
Vintage Air Gen-V Super Magnum universal climate control systems are powerful and intelligent. The Gen-V uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V Super Magnum kits include the evaporator unit and mounting brackets, a wiring harness, an electric servo heater control valve, duct hoses, a drain kit, and detailed installation instructions. Features and benefits: * Engineered to cool your vehicle faster than ever * Variable blower speed and dash/floor/defrost blend * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength, and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high performance blower with up to 20 percent more airflow
( 2 )
$1,164.99
Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower
( 16 )
$1,359.99
—
$1,920.99
Roto-Fab Big Gulp Series air intake systems were designed to feed the air demands of the fastest cars in the world. Don't leave horsepower on the table—get the most out of your modifications. Order the kit recommended for your specific vehicle. Roto-Fab Big Gulp Series air intake system features and notes: * Innovative air box coupling: allows for solid mounting to the air box as the system transitions from the air filter clamping surface; seals out unwanted engine heat * Air box seals effectively to the hood, allowing for maximum air filter size and air box volume * Utilizes the full factory air inlet to ensure low IATs and maximize performance * 100 percent silicone hose couplers to ensure lasting product quality * Custom fabricated inlet elbow to maximize performance and airflow cross-section * Oversized breather port to further accommodate high-horsepower applications * Polymer duct work is also effective in reducing heat transfer * Requires a custom tune for your vehicle
( 4 )
$654.95
—
$764.95
S&B Filters cotton filter cold air intake kits are designed to improve airflow and bring down the temperature of the air that enters your engine. To achieve more airflow, S&B oiled cotton filters are built with four layers (or eight for diesels) of the highest-quality cotton gauze. They use deeper, wider pleats with more per filter. Plus, their manufacturing process yields almost no "bleed", creating a greater open surface area. All of this adds up to more airflow with excellent protection. The filter elements are washable, reusable, and will protect your engine from harmful dirt and debris. Gain performance and a sporty, high-tech appearance under the hood of your rig with an assist from the S&B Filters cotton filter cold air intake kit best suited for your application. More product features, items, and specifications include: * Silicone rubber (not urethane) filters and couplers help ensure they won't degrade or crack, while resisting temperatures as high as 400 degrees F * Helps balance air/fuel ratios to improve gas mileage * Cross-linked intake tube minimizes restriction * Custom air box (where applicable, including some with clear lids) keeps loose dirt and turbulent underhood air out of your intake * Specific year, make, and model design makes them simple to install, with help from the easy-to-use installation instructions and illustrations * Included mounting hardware for replacing your stock assembly in 30 minutes or less in most cases
( 439 )
$188.82
—
$699.00
Vintage Air has incorporated their state-of-the-art Gen-II servo motor control technology into their smallest heating and cooling systems--the Gen-II Mini systems. Ideal for trucks and smaller hot rods, these Gen-II Mini systems offer high torque screw-drive servo motors to control all butterfly airflow doors. You won't have to rely on engine vacuum, and that's important with high performance engines. Mini systems make the most of re-engineered coils for increased cooling and heating, CAD design to optimize the evaporator case, and blower fan motors isolated on rubber mounts for quiet running and longer life. These small but mighty systems allow for more capacity and airflow and feature true bi-level operation in cooling and heating modes and a more powerful dedicated and dehumidified defroster mode. You choose between "heating and cooling" and "heating, cooling, and defrost" models to suit your needs. All Gen-II systems come complete with evaporator and mounting brackets, a wiring harness, an adjustable servo heater control valve, and an A/C duct hose and drain kit. The defrost option includes hoses and ducts. Get cool with Vintage Air Gen-II Mini systems.
( 29 )
$611.99
—
$696.99
Halltech Killer Bee MF103 cold air intake kits offer bolt-on horsepower and torque for your C6 Corvette. These performance induction systems require no additional tuning, however, if you choose to tune, you can expect 31 to 35 RWHP. Killer Bee systems include Halltech's Beehive heat shield that isolates the air filter and MAF sensor from the incredible heat of the engine bay, and they feature a forward design of the mass airflow sensor and velocity stack for improved idle manners. Halltech CAD-designed, plug-and-play Killer Bee induction systems also feature strong and durable XLPE poly construction. They are offered in black or red to complement your red fuel rail covers, and come with stock (OEM size) throttle body and connector hose with PCV hole, or you may choose NW (Nick Williams) throttle body and connector hose with or without PCV hole. Killer Bee systems also work with Corvette Carbon Editions.
( 3 )
$619.99
The "next generation of air intake technology" K&N 50 Series NextGen cold air intake kits are precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow. Every detail of the intake system is thoughtfully designed to deliver performance, plus make the installation process DIY-friendly. NextGen cold air intakes are dyno-tested to provide a guaranteed increase in horsepower and torque on your engine's stock tune, and they are back by K&N's 55+ years of engine protection. Enjoy the roar of your engine on acceleration without any drone at cruising speeds; select the K&N 50 Series NextGen cold air intake kit designed for your vehicle. NextGen CAI details: * High-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow to your engine and provides an increase in horsepower and torque with no tune required * Custom NextGen hybrid air box design incorporates an enlarged factory fresh air inlet for more airflow and lower inlet air temperatures * Easy-view open top for quick filter access * Oversized performance high-flow air filter, washable and reuseable, provides added surface area to flow more air and hold more dirt * Quick Lock air filter technology allows the filter to snap into place, and a sealing bead secures the system with just one hose clamp * CAD-designed large diameter tube with integrated airflow channels force an increase in velocity of air into your engine
( 11 )
$399.99
—
$449.99
If you are looking for the convenience of an oil-free air filter, Roto-Fab dry cold air intake systems put a new spin on great performance and sound. Roto-Fab developed these intake systems to utilize all the available space to package a huge air box and massive filter while maintaining an extremely effective barrier against engine bay heat. Their intake packages perform well as a "stand alone" modification while being capable of meeting the higher air demands of supercharged and high-horsepower builds. Roto-Fab's open top design effectively seals to the hood which maximizes air box volume while providing all of the advantages of a lid. Features include: * Top-quality components throughout including: high-gloss silicone hose couplers, stainless steel hose clamps and fasteners, and molded-in inserts for air box and MAF sensor mounting * High-quality filters designed to last the life of the vehicle * Depending on application, systems are available with or without sound tube delete * Detailed, step-by-step instructions are included for easy installation * Where applicable, the logo badge on the air box has a black anodized finish with a laser-etched Roto-fab logo
( 42 )
$504.95
—
$604.95
JLT cold air intakes are engineered to minimize air restriction and increase airflow far better than your stock system. The intake tube is roto-molded plastic with a huge filer opening for superior airflow and no heat soak like metal tubes. The air filter is custom-built for super smooth and fast airflow and has huge deep pleats for more surface area than filters that look much bigger. The ABS plastic heatshield blocks engine heat at idle and low speed. It uses a large area to make sure the filter has tons of cool air and uses the factory fresh air inlet from the bumper to keep temps cool. Improve your vehicles horsepower and performance with one of JLT's cold air intakes!
( 1 )
$319.00
—
$699.00
On Sale
Momentum Pro 5R air intake systems from aFe are designed around a large pre-oiled 7.5 in. tall, oval, cotton media filter with five layers of progressively finer mesh to maximize performance. These incredible filters fit into equally impressive one-piece housings with auxiliary air scoops and large clear sight windows. When combined with the housings, these aFe air intake systems outflow the factory unit by 31 percent—yielding average gains of 11 hp and 13 lbs.-ft. of torque. They also include a urethane plug to block the scoop if not used. Give your engine more go power with aFe Momentum Pro 5R air intake systems.
( 12 )
$408.00
—
$729.00
$367.20
—
$656.10
Corsa carbon fiber DryTech 3-D air intakes blend aesthetics and engineering to deliver in a single package. The intakes efficiently direct airflow from the filter to the throttle body. Streamlining the airflow eliminates any calibration concerns, and helps increase throttle response. Features include: * 100 percent carbon fiber construction * Outflows stock intake creating more horsepower and torque * DryTech 3-D synthetic dry filter
( 6 )
$675.99
—
$758.99
BluePrint Engines muscle car swap air intake kits are designed to provide proper frequency and location of the mass airflow sensor used with GM controllers. They have been tested on throttle bodies from 80mm to 102mm, and each kit includes filter, tube, MAF receptacle, block-off, clamps, couplers, and hardware. Features and specs: * Red, oil-less cotton gauze washable filter * Total height from base is 7 in. * 4.750 in. black silicon cap * 6 in. inlet * Aluminum intake tube with 97.5mm I.D. * Five stainless steel hose clamps * Tube-to-filter adapter * Three silicon couplers * Silicon clean air hose * Vacuum cap * MAF block-off plate, gasket, and hardware Note: May require modifications based on the wide applications that BluePrint's engines are installed into. Custom installation and modifications, such as drilling a hole for intake air temp on some models.
Not Yet Reviewed
$159.99
Roto-Fab cold air intake systems supply your ride with maximized power gains and an impressive appearance. Their selection of American-crafted systems includes several options that will also provide awesome sound, as well as CAI setups for supercharged (S/C) applications where air demands are higher. Most Roto-Fab intake systems install without modifications and perform well with stock calibrations. Their S/C systems offer great tuning capabilities to gain the most from your setup. All feature large duct sizes, generous air box volumes, and oversized filters. The air boxes come standard with a high-gloss black powdercoat finish. Whether naturally aspirated or supercharged, Roto-Fab cold air intake systems are designed to fit better and deliver a performance difference you will see and feel.
( 94 )
$475.50
—
$809.95
On Sale
The next generation of air intakes is here! aFe Momentum GT Pro 5R air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Their one-piece sealed housing with an auxiliary air scoop is designed to eliminate the use of multiple housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold-weather applications where you want to block off the auxiliary air scoop. These systems feature premium stainless steel T-bolt clamps and a 2-ply, reinforced silicone coupler at the throttle body for increased strength and durability. They also include a 5-layer washable and reusable Pro 5R air filter. Experience maximum horsepower gains, huge low-end towing power, increased torque, and a throaty, mean growl for your performance machine with the Momentum GT Pro 5R air intake systems from aFe.
( 100 )
$959.00
$324.90
—
$863.10
Cold Air Inductions intake systems have a simple goal--maximizing your vehicle's performance by keeping your intake air as cool as possible! First, every CAI intake is specifically designed and engineered for the vehicle it is sold for, resulting in maximum performance, an easy install, and a perfect fit. Next, their intakes are made of high-quality aluminum--not heat-absorbing plastic. Their intake tubes have a ceramic coating both inside and out to reduce heat soak, as well as to keep radiant heat from penetrating the intake air. And they've applied 3/8 in. thermal insulation inside the air box to prevent heat transfer from the engine bay. Each cold air intake is TIG-welded by hand and powdercoated, plus the air box lids feature a clear viewing window for easier filter inspection. What should a high performance cold air intake system look like? Just like Cold Air Inductions intake systems! Additional features include: * High performance lifetime air filters provide protection with minimal airflow restriction * Black couplers and elbows made from 4 or 5-ply silicone rubber for durability * Entire system meets OEM standards and requirements * Stainless steel clamps and fasteners * Direct replacements for factory air intakes--no tuning required * Everything needed for installation is included * Many systems are available with your choice of near-chrome or textured black powdercoat * Most systems are direct replacements for the OEM air box--no modifications required and the OEM washer bottle is retained in the stock location
( 180 )
$299.99
—
$399.99
VaraRam VR-B2 Corvette cold air intake kits feature a multiple venturi system to accelerate air flow. The intake ram air ducts are designed to produce over 40HP and increase torque throughout the RPM range. These air intake kits increase both throttle response and gas mileage. VaraRam VR-B2 cold air intakes are easy to install and do not require any cutting or drilling. Includes VR Super Street filter.
( 19 )
$370.99
We want you to have reusable filter elements that outflow ordinary paper filters, without spending an arm and a leg. Summit Racing™ reusable air filter elements utilize quality materials and have oil already applied. They're available in dozens of sizes, shapes, and styles—and are a terrific value.
( 232 )
$18.99
—
$53.99
JLT engineers set out to create the biggest and baddest intake on the market—and the result was their JLT Performance Series 1 cold air intake kits. These assemblies are fully computer designed to optimize space and give the best fit and finish. A roto-molded plastic tube resists engine heat and keeps the intake air charge nice and cool; while a smooth, tapered path to the throttle body increases air speed and horsepower. The intakes also feature a heat shield designed to help keep hot air out by firmly hugging and sealing itself to the contours of the hood. For great looks and more power, order the JLT Performance Series 1 cold air intake kit designed for your vehicle application.
( 7 )
$259.00
—
$439.00
Roush cold air intakes feature a premium reusable air filter with a mounting clamp and a custom-formed, glass-filled nylon air box tray. Some models will include a high-flow 3 in. stainless steel induction tube. These intakes utilize your factory PCM calibration and give you a sleek black factory look. You'll gain power and performance with a Roush cold air intake, available for fitment on dozens of vehicle applications.
( 37 )
$399.99
—
$439.99
Air Lift WirelessONE 2nd generation control systems put the power in your hands—literally! And the redesigned systems are easier than ever to install! Systems are available with or without EZ Mount installation brackets. Inflate or deflate your air spring system with one touch of Air Lift WirelessONE 2nd generation control systems. NEW!: Air Lift is now offering the same trusted WirelessAIR kit to customers without a hand-held controller. The 73000EZ system utilizes a free smartphone app for wireless control. This new option will allow you to order and receive WirelessAIR kits with all the same functionality and less wait time. Air Lift WirelessONE 2nd generation control systems feature: * Single-path control: Left and right air springs are inflated/deflated equally * Wireless hand-held unit and new mobile app for convenient operation inside or outside your vehicle. Kits are also available without a hand-held controller—utilizing a free smartphone app instead for wireless control * Easy installation—no air lines to the cab * Three programmable, user-defined memory settings
( 28 )
$551.99
—
$1,335.99
Lots of cool, clean air has been shown to increase horsepower—and these cotton replacement air filters from S&B deliver both unrestricted flow and high filtration. The 8-layered cotton filters protect your engine from harmful dirt and debris, while the couplers and end caps are manufactured from premium silicone rubber to help prevent cracks. And because the filters are cleanable and reusable, they're a great performance value. S&B Filters elements are available in numerous styles and sizes for compatibility with nearly any engine bay. Select from nearly a hundred universal and application-specific models.
( 61 )
$68.48
—
$139.00
Making your car one-of-a-kind is great--unless you can't find what you need. AEM Induction universal cold air intake kits solve your customizing problems, fitting your engine swap with lots of cool flowing air. AEM universal kits provide parts that offer you multiple options and configurations to create your own special high-flowing system. They also include an instruction guide to assist you on installing and tips on how to make everything fit and work together--mass air sensor setup, bracket placement, welding, tube connection, and more. AEM Induction universal cold air intake kits include: * AEM Dryflow filter * Three 4 in. diameter pre-bent aluminum tubes * Straight 36 in. long tube * 4 in. diameter tube * Seven assorted couplers (elbow, straight, and step) * Weld-on MAF sensor mount for Hitachi blade sensors * Two brackets * Two 1 in. long rubber mounts * Two 12 in. long weld-on mount brackets * Two weld-on 3/8 in. x 1 3/4 in. long nipples * Two 3 1/2 in. to 4 1/2 in. range hose clamps * 35 in. 3/8 in. breather hose
( 5 )
$350.99
Get cooler air to your engine with one of these Airaid U-Build-It Master Kit I cold air intake kits. They include multiple sections of polyethylene tubes and bends to route your air intake pipe where you want. The systems also include a reusable, conical cotton gauze Airaid air filter and all necessary mounting hardware to complete the installation. Make your engine breathe easier with one of these Airaid U-Build-It Master Kit I cold air intake kits.
( 10 )
$263.99
—
$314.99
K&N washable lifetime performance air filters are designed to increase horsepower and acceleration while providing excellent filtration. K&N makes over 1,400 different replacement air filters for virtually every vehicle on the road. These filters are washable and reusable--and are custom-designed to fit into your existing factory air box. Their drop-in design means that adding performance is simple. With most vehicles, you simply remove the disposable air filter and replace it with one of these K&N air filters. Find the model designed for your specific vehicle application.
( 1159 )
$28.50
—
$157.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
