Availability
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 570 )
$379.95
—
$548.95
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 443 )
$497.95
—
$681.95
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 223 )
$397.95
—
$670.95
Mopar Performance cold air intake kits reduce intake air temperature and increase intake manifold pressure, which equals more power. They're quick to bolt on and they make substantial, yet economical power and torque gains.
( 17 )
$277.99
—
$728.99
Performer RPM Dual-Quad intake manifolds are available in two versions, one for small port cast iron factory heads and one for factory large port with Edelbrock's Performer RPM W-Series heads. These manifolds deliver performance improvements in the 1,500 to 6,500 rpm range with Edelbrock Performer Series or Thunder Series AVS dual-quad carburetors, and they accept their dual-quad accessories including fuel lines, throttle linkage, and air cleaners. They include the oil fill tube and matching push-in breather.
( 3 )
$746.95
Edelbrock Performer Dual-Quad Air-Gap EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds require a universal 4-barrel throttle body, fuel rail set, fuel injectors, fuel pump, and regulator--which are each sold separately.
( 1 )
$779.95
Mopar Performance Hellcat cold air intake headlamp duct tubes are designed to allow cooler outside air through the headlamp port and funnel it directly into the intake manifold. These kits provide noticeable horsepower and torque gains under varying atmospheric conditions.
( 1 )
$65.99
Designed from the ports up to provide Ultimate Bolt-On Performance™, Trick Flow's® R-Series intake manifolds will help your big block Mopar make loads of power. The manifolds are designed for use on large cubic inch engines making peak horsepower in the 3,500-7,500 plus RPM range. The manifolds have CAD-optimized, large open plenums and one-piece, single plane runners. Special attention was paid to smooth airflow for equalized air and fuel distribution. Casting the manifolds in lightweight A319 aluminum delivers a substantial weight reduction. Extra material around the port openings allows for port matching and/or full porting. Integral bosses cast into each runner can be drilled and tapped to accept nozzles for nitrous applications. And if all these features don't convince you that Trick Flow® R-Series intake manifolds mean business, the Holley 4500 Dominator carburetor flanges surely will. While designed to produce maximum power with Trick Flow's® PowerPort 270 and 295 cylinder heads, the R-Series manifolds also perform extremely well on engines equipped with other brands of cylinder heads with 270cc and larger intake ports.
( 3 )
$524.99
For the best fit and function, choose Mopar Replacement intake manifolds to replace old, cracked, and worn originals in your Chrysler, Dodge, or Jeep. Manufactured from quality materials, these Mopar parts offer an OE fit for an easier installation—and provide the right look, along with great performance, too! Select the Mopar part application designed for fitment on your vehicle.
( 17 )
$100.99
—
$2,202.99
Allstar Performance intake manifold bolt kits include Grade 8, 12-point flange clear zinc bolts and stainless steel washers. These kits are designed to fit small block Chevy and Chrysler "A" and "B" engines where clearance is insufficient for standard hex head bolts.
( 12 )
$18.99
Summit Bucks
Most Fel-Pro Performance intake manifold gaskets have Printoseal construction, which puts beads of special elastomers around the ports for extra sealing power. They also feature a non-metallic, rubber-fiber base material that resists gasoline and alcohol—and they allow engine builders to precision-trim around the intake ports. These replacement gaskets are available in a variety of materials, thicknesses, and port configurations. Order the set recommended for your vehicle year/make and engine application.
( 1298 )
$14.99
—
$43.99
BluePrint / Holley Sniper EFI fabricated intake manifolds continue to push the aftermarket with low-profile intakes for the popular GM LS engine family. They're good looking, perform well, and offer great value for a performance sheet metal style intake manifold. Each unit is ready to bolt on out of the box, is designed to accept Sniper high-flow throttle bodies, and includes a high-flow fuel rail kit. This updated design was developed to allow the end user to fit under a stock hood. Each manifold is precision fixtured, welded for a perfect fit and maximum structural integrity. Your choice of throttle body opening sizes of 92mm and 102mm are available. Additional details: * Low-profile design (overall 1.875 in. shorter) allows fitment under stock hoods on Corvette, Camaro, Firebird, GTO, and others where hood clearance is at a minimum * Shortened runners allow for compact design. Overall plenum volume maintained by increasing the overall width of the plenum and increasing the overall dimensions of the runner * 3mm (1/8 in.) thick T6061 sheet aluminum construction, strong and durable even under high horsepower and boosted conditions * 100 percent TIG-welded * Intakes include 3/8 in. fuel rail kits with -8 AN fittings and crossover braided line capable of supporting 750+ horsepower (laser-engraved Sniper logo) * Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders
( 1 )
$599.99
Weiand Action Plus intake manifolds are designed for use as stock replacements, with improved power and torque characteristics. They're 180 degree, dual plane types, with a carburetor flange that'll accept either stock or aftermarket performance carburetors. Their effective rpm range runs from idle to 6,000 rpm. With their high-flow runner design and ability to produce increased power with little modification, it's no wonder these manifolds are so popular.
( 66 )
$422.95
These Spectre Performance intake manifold bolts are constructed from Grade 5 steel. They're available in several head styles and finishes to suit your needs.
( 3 )
$8.99
Summit Bucks
Fel-Pro Series 17300 marine intake gaskets include intake manifold side gaskets, intake manifold end seals, and distributor mounting gaskets. They are designed and constructed to allow engine builders to trim them for an exact fit on modified ports. The base material resists coolant, gasoline, alcohol, and oil.
( 32 )
$33.99
—
$41.99
Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer RPM Air-Gap aluminum intake manifold that is available in a variety of finishes, an intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Thunder AVS 800 cfm electric choke carburetor. The Edelbrock Performer RPM Air-Gap intake uses an open air space that separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge that means more power and excellent throttle response. Ready for a change? Try these Edelbrock Performer RPM Air-Gap intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 2 )
$1,140.95
These Edelbrock CH-28 dual quad intake manifolds are designed for 413, 426, and 440 c.i.d. Chrysler V8s. Use them with the Performer-Plus cam for more low-end torque, or the Torker-Plus cam for more top-end power. They will not fit 1962-64 Max Wedge cylinder heads. Carb center to carb center is 6 7/16 in.
( 1 )
$530.95
Holley EFI Gen III Hemi Hi-Ram intake manifolds are for high performance applications where induction system height is not limited. Able to add even more power to your engine, these manifolds have large intake ports and a modular base design with runner lengths and tapered cross-sections that will perform well for a wide range of engine configurations. Their aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, and street-rod applications. Holley EFI Gen III Hemi Hi-Ram intake manifolds feature cast aluminum construction offered with a natural satin or black finish. They are available with either a 95 or 105mm LS-style throttle body or as the manifold base alone for custom induction systems. Features and benefits: * Modular design base accepts a wide range of EFI tops and can be used as the foundation for custom induction systems * EFI fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system * Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7L to 7.2+L range, and maximum power at 7,500 to 8,500 rpm * Works with Gen III Hemi injectors and Bosch EV-1 style injectors * O-ring seal to head offer superior OE-style sealing and are easy to replace * Billet oil fill cap offers an attractive low-profile design * Positive Crankcase Ventilation (PCV) ports with adapter fittings * Port for OE-style Manifold Absolute Pressure (MAP) sensor (1 or 2 Bar) * Cast-in pads for adding nitrous nozzles
( 2 )
$972.95
—
$1,549.95
Holley Strip Dominator intake manifolds are classics that have been making power for Chevys for almost as long as Holley has been making carburetors. They're proven power builders, engineered to achieve maximum performance. Their single plane design, with a deep, open plenum and isolated runners, produces good power from 4,500 rpm to 7,600 rpm for small blocks, and up to 8,500 rpm on big blocks. There is no exhaust heat crossover.
( 35 )
$482.95
Holley EFI Gen III Hemi single plane intake manifolds provide maximum hood clearance combined with plenum and runner geometry that provides a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The isolated design of the air/fuel passages helps to increase charge air density and performance. Holley EFI Gen III Hemi single plane intake manifolds are great for turbocharger, centrifugal blower, or NOS power adders. Features: * Minimum carburetor flange height for maximum clearance to hood * 4150-type throttle/carb flange * Cast aluminum construction * Billet fuel rails * Billet aluminum oil fill cap * Mounting brackets for use with either Bosch EV1 or Gen III Hemi OEM fuel injectors * O-ring seals around ports * Natural or black finish available
( 2 )
$649.95
—
$665.95
For maximum performance in normally aspirated competition applications, Weiand Hi-Ram Tunnel Ram intake manifolds are the manifold of choice. They're designed primarily for drag racing, truck/tractor pulls, and performance marine applications where high rpm is required but bottom-end torque isn't. With their patented D-shaped port runners and large plenum chamber, the manifolds provide optimum thrust of the air/fuel mixture to the intake ports. They mount either single or dual square-mount carbs and, depending on the application, have power bands that run from 2,500 rpm to as high as 9,000 rpm. Separate tops and runners are available for some manifolds. Order the model recommended for your year/make, engine, and cylinder head application.
( 31 )
$716.95
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$775.85
—
$1,895.62
Mopar Replacement intake manifold gaskets and seals are the perfect choice to service and maintain your Mopar ride. Cut from premium materials for leak-free performance, they will provide an OE fit and function, just like the originals. Order genuine Mopar Replacement parts for your vehicle.
Not Yet Reviewed
$6.50
—
$172.99
Edelbrock intake manifold bolts are specifically designed to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts and washers needed for manifold installation are included in these kits.
( 227 )
$23.95
—
$37.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
