Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
290 Results Found For "tbi"
Showing In Stock Items. Show All 386 Items.
BluePrint Engines GM 350 C.I.D. 260 HP TBI Long Block Crate Engines
BluePrint Engines GM 350 C.I.D. 260 HP TBI Long Block Crate Engines have been tested in a factory-equipped 1987-95 OEM 5.7 truck with factory torque converter, fueling system, and ECU, while using 87 octane fuel. These increased horsepower, replacement long blocks are designed specifically to install in 1987-95 TBI trucks without any tuning or fuel system upgrades required. Recommended spark plugs are ACDelco CR43TS with .035 in. gap. Customers will re-use their existing intake manifold, ECU, and fuel system from '87-95 truck engine. This is an excellent upgrade for your truck, gaining roller cam, 4-bolt main, and horsepower; otherwise retaining stock components, such as torque converter and exhaust. * SPECIFICATIONS: HP and Torque: 260 hp / 342 lbs.-ft. Gain of up to 50 hp and 42 lbs.-ft. vs factory Compression Ratio: 9.1:1 1987-1995 GM Iron Heads Hydraulic Roller Cam Cast Steel Crankshaft Hypereutectic Pistons * BLOCK: NEW BluePrint Block 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Steel Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear * CYLINDER HEADS: 1987-1995 GM Iron Cylinder Heads 64cc chamber 1.94 in. intake/1.50 in. exhaust valves * CAM SPECS: Cam Type: Roller .447 Intake, .459 Exhaust 201 Intake / 208 Exhaust duration At .050 - 117 degree lobe separation * IGNITION TIMING: Controlled by OEM Computer * ALSO INCLUDES: New valve covers Oil pan Timing cover Harmonic Balancer Dyno test results shipped with engine * WARRANTY: 30 month / 50,000 mile * NOTES: Not for use in pollution-controlled vehicles
Not Yet Reviewed
$5,999.00
ATK High Performance GM 350 TBI 290 HP Stage 1 Long Block Crate Engines
Give your truck a breath of fresh life with ATK High Performance GM 350 TBI 290 hp Stage 1 long block crate engines. These engines are designed to replace your old tired mill with a fresh unit that has a little bit more kick. These engines feature upgraded internals to help them pump out 290 hp and 370 ft.-lbs. of twist that will get your pickup or muscle truck moving. ATK GM 350 TBI 290 hp Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * OE cast iron TBI cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
( 6 )
$3,034.99
Chevrolet Performance Vortec Intake Manifolds with TBI
These Vortec manifolds with TBI from Chevrolet Performance are designed for maximum horsepower with throttle body fuel injection and EGR usage. These manifolds will fit all Vortec-designed cylinder heads.
( 17 )
$694.28
Carter Inline TBI Fuel Pumps
Carter inline TBI fuel pumps are ideally suited to allow the installation of throttle body injected engines that were previously carbureted. Designed to operate applications with system pressures between 9 and 22 psi, they are flow-rated at 50 gph at 20 psi. These pumps will function with the existing OE fuel pressure regulator. Step-by-step installation instructions are included.
( 40 )
$179.99
JET Adjustable TBI Billet Fuel Pressure Regulators
These JET adjustable TBI billet fuel pressure regulators ensure that your vehicle's fuel supply is precisely metered for optimum mileage and performance. Don't take chances with your fuel supply--rely on Jet for your vehicle's fuel system needs.
( 13 )
$161.99
—
$201.99
Edelbrock Performer 454 TBI Intake Manifolds
Edelbrock Performer 454 TBI intake manifolds deliver outstanding performance for the street while maintaining operational compatibility with OEM accessories. Performer 454 TBI manifolds accept the stock EGR in the stock location.
( 10 )
$562.95
MSD Atomic EFI TBI Power Modules
Small but potent, MSD Atomic EFI TBI power modules handle the high current loads! The modules supply power to the fuel pump (no need for an external relay), and they have two activation wires so you can set temperatures for dual electric cooling fans. The Atomic TBI power modules easily plug into the throttle body-mounted engine control unit with a single, clean connection--thanks to MSD's CAN-Bus technology. Then, simply plug in the handheld monitor and you're ready to go! The right modules supply the right power … Atomic power for your MSD EFI TBI systems.
( 1 )
$562.95
MSD Atomic TBI Throttle Position Sensor Modules
MSD Atomic TBI throttle position sensor modules are designed for use with the MSD Atomic throttle body fuel injection system. They connect inline to the Atomic TBI communication network and provide a common 0-5 V throttle position output signal required for the operation of an electronic overdrive transmission or other accessory.
( 3 )
$306.95
MSD Atomic EFI TBI Handheld Monitors
Communication is important. MSD Atomic EFI TBI handheld monitors are the devices you use to interface with your Atomic throttle body fuel injection (TBI) system. You'll be in the know about everything happening with your engine, from exact air/fuel ratio readouts to engine coolant temperatures. Not a software engineer? You don't have to be! True to MSD form, these handheld monitors are very easy to use. In the initial setup, you'll provide info that you already know--such as cubic inches, number of cylinders, and your desired rev limit. After that, you simply use the engine feedback as you would a dashboard gauge. Plus, the data gathered doesn't just disappear. The monitors display alerts and save them for up to 10 starts for you to review. Little device, big communication--MSD Atomic EFI TBI handheld monitors keep an eye on your engine's performance.
( 3 )
$439.95
MSD Atomic TBI IAC Motors
Service your Atomic TBI with MSD replacement parts. Their IAC units include the idle air control motor and gasket O-ring to repair and maintain your throttle body. Allow your Atomic TBI to control airflow efficiently with genuine MSD replacement IAC motors.
( 6 )
$60.75
Painless Performance Connector Cables for TBI and TPI Coils
These connector cables from Painless Performance are designed for use with TBI and TPI coils. Connector cables are available to connect the external coil to the distributor, and to connect the power and tachometer to the coil.
( 12 )
$38.99
—
$46.99
ATK High Performance GM 383 TBI Stroker 320 HP Stage 1 Long Block Crate Engines
Experience the torque that only a stroker can give you with ATK High Performance GM 383 TBI Stroker 320 hp long block crate engines. These engines crank out 320 hp and 395 ft.-lbs. of torque, perfect for your pulling rig, RV, or muscle truck. They are hand-assembled and precisely balanced to create smooth-running, reliable engines for your ride. ATK GM 383 TBI Stroker Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * OE cast iron TBI cylinder heads * Nodular steel crankshaft and 4340 I-beam connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .435 int./.462 exh. * Cam duration at 0.50- 198 int./210 exh. * 9.5:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
( 1 )
$3,998.99
On Sale
MSD Atomic TBI ECUs
MSD Atomic EFI TBI ECUs are replacement support components to maintain your throttle body's performance. Integrated to the body, housing several sensors, and responsible for ignition timing, these ECU replacements will perform just like the originals to keep your MSD Atomic system operating at optimum levels.
( 2 )
$562.95
MSD Atomic EFI TBI Fuel Pressure Sensor Kits
MSD Atomic EFI TBI fuel pressure sensor kits are replacement support components designed to maintain your throttle body's performance. Atomic EFI systems by MSD were designed with two goals—to simplify EFI and improve overall performance. Simplicity is achieved through less wiring and fewer connections, and readily available replacement components such as these Atomic EFI TBI fuel pressure sensors. These support component kits include senor and O-rings to make it easy to uphold optimum performance.
Not Yet Reviewed
$89.35
—
$89.99
Nitrous Express GM TBI Nitrous Systems
If you have a General Motors engine with throttle-body injection (TBI), don't worry. Nitrous Express has you handled. Their GM TBI nitrous systems are built around the potent "Shark" nozzle and can deliver a solid 50 to 125 hp, to give you that extra kick you're after. Kits include the nitrous bottle and mounting brackets, a nitrous supply hose, switch, wiring, relay, solenoids, and mounting hardware.
Not Yet Reviewed
$1,034.51
—
$1,280.18
Trans-Dapt Performance Swirl-Torque TBI Spacers
Trans-Dapt Performance Swirl-Torque TBI spacers have slotted ports to create a vortex that improves your air/fuel mixture. This stimulates low-to-mid-range torque, to provide more torque throughout the entire rpm range. Improved combustion efficiency also provides you with better gas mileage. Plus, they feature a non-whistle design.
( 76 )
$49.99
—
$116.99
Trans-Dapt Performance TBI Riser Plates
Trans-Dapt TBI riser plates raise the housing of the TBI unit, allowing 15 percent more airflow by the injectors for more horsepower. More power and a great price, what else could you ask for?
( 13 )
$50.99
Trick Flow® TBI Air Cleaner Studs
These Trick Flow® TBI replacement air cleaner studs have been designed to thread on top of the TBI unit and allow the factory air cleaner stud to attach for proper height of the air cleaner assembly. They are manufactured from high-grade steel and feature a black oxide finish for protection.
Not Yet Reviewed
$18.99
Nitrous Express Dodge V-8 TBI Dual Nozzle Nitrous Systems
Got a TBI V8 Dodge that needs a quick shot of power? A Nitrous Express dual nozzle nitrous system can deliver the goods -- 50, 75, 100, or even as much as 125 hp. Better yet, you get to pick the amount of the increase, just by tweaking the tuning of the system. Kits include the nitrous bottle, nozzles, hoses, wiring, solenoids, and all mounting hardware.
Not Yet Reviewed
$1,004.49
—
$1,280.18
Trans-Dapt Performance Wide-Open TBI Spacers
Trans-Dapt wide-open TBI spacers improve mid-to-high end torque. Their open design allows more air to enter the intake. The spacers work best for tow vehicles, or frequent wide-open throttle applications. Plus, they feature a non-whistle design.
( 5 )
$51.99
—
$159.99
JET TBI Fuel Regulator Diaphragms
JET TBI fuel regulator diaphragms are individual extra-strength replacements. They can be used with the stock regulator housing as a heavy-duty upgrade or with the JET TBI adjustable fuel pressure regulator to gain maximum efficiency. Replace leaking fuel regulator diaphragms with robust substitutes from JET.
( 1 )
$62.99
Trans-Dapt Performance Smooth Bore TBI Spacers
Trans-Dapt Performance smooth bore TBI spacers improve plenum volume and air velocity for mild horsepower and torque gains. Trans-Dapt Performance Smooth Bore TBI spacers work best for tow vehicles or frequent wide-open throttle applications. Plus, they feature a non-whistle design. Trans-Dapt Performance Smooth Bore TBI spacers are made from durable aluminum, so you can count on them to keep your vehicle running efficiently.
( 12 )
$33.50
—
$106.99
FiTech Retro LS TBI 650 HP System Inline Pump/Regulator Fuel Injection Master Kits
FiTech Retro LS TBI 650 hp system inline pump/regulator fuel injection master kits deliver old school looks and modern EFI performance for your hot rod. These kits feature a FiTech classic carburetor-gold throttle body with transmission control and a pre-terminated wiring harness with specific LS engine sensors, including the factory knock sensors to complement the built-in timing control. The remote ECU can control the transmission shift points and characteristics of the popular 4L60/65/80E transmissions. No laptop is required, and the system will work on 24x or 58x cam sensors. Also supplied with the Retro LS TBI is a handheld touch screen controller, cable and windshield mount, WBO2 sensor, bung kit, gaskets, mini USB cable, instructions, and warranty info. For fuel delivery, these FiTech Retro LS master kits pair the TBI an in-line pump kit and Tight Fit regulator with gauge. The inline kit is supplied with a heavy-duty 255 lph external pump suitable for engine producing up to 600 hp, 40 ft. of high-pressure fuel hose, two fuel filters, fittings, mounts, and clamps. The Go Fuel Tight Fit regulator allows you to set the fuel pressure precisely where your EFI system and engine require. It can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum and features -6 ORB ports along with a vacuum/boost port.
Not Yet Reviewed
$2,166.99
FiTech Retro LS TBI 650 HP System Force Fuel Injection Master Kits
FiTech Retro LS TBI 650 hp system Force fuel injection master kits deliver old school looks and modern EFI performance for your hot rod. These kits feature a FiTech classic carburetor-gold throttle body with transmission control and a pre-terminated wiring harness with specific LS engine sensors, including the factory knock sensors to complement the built-in timing control. The remote ECU can control the transmission shift points and characteristics of the popular 4L60/65/80E transmissions. No laptop is required, and the system will work on 24x or 58x cam sensors. Also supplied with the Retro LS TBI is a handheld touch screen controller, cable and windshield mount, WBO2 sensor, bung kit, gaskets, mini USB cable, instructions, and warranty info. FiTech master kits provide a fuel delivery system and in these kits you'll have either a Go Fuel Force Fuel or Mini Force system. The Force Fuel supports the demands of an 800 hp engine on gas and features a 1/2 gallon reservoir, an internal 340 lph pump with a serviceable 10 micron fuel filter, and an internal regulator that keeps the pressure at a consistent 58 psi, ideal for reliable EFI performance. The Mini Force is great for cramped engine compartments and supports up to 600 hp. It is equipped with an efficient 255 lph pump and an internal regulator. Both systems are supplied with high-pressure fuel hose, return line fitting bung, and a liquid-filled gauge. Choose the FiTech Retro LS master kit with your preferred fuel delivery system.
Not Yet Reviewed
$2,136.99
—
$2,197.99
