Availability
Showing In Stock Items. Show All 422 Items.
Ford Performance Parts has a range of spark plugs to meet your performance needs. Designed for use in engines operated at sustained high rpm or with higher-than-stock cylinder combustion pressures, these plugs are made from quality materials and are designed to provide the spark that you need to fire up your Ford. Depending on the application, features of Ford Performance Parts spark plugs may include: * Available in heat ranges colder than the stock spark plugs * Sold individually and in sets * Pre-gapped at the factory * Offered in a variety of thread sizes * More robust construction for race applications
( 34 )
$56.99
—
$86.99
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 27 )
$68.99
—
$71.99
ACDelco spark plug wire sets meet or exceed original equipment specifications for fitment and performance. They're made from top-quality materials, so you know they'll last. The assembled ignition wires are available with different terminal ends and boot ends. Over 700 sets are available to cover virtually any vehicle on the road today. Order the spark plug wires recommended for your application.
( 146 )
$64.99
—
$106.99
On Sale
With Summit Racing branded all 100% silicone 8mm constructed wire, a 300ohm per foot wire wound EMI suppression core, high heat silicone boots and stainless steel and brass terminals, you get all the high end features a wire set can offer, without breaking the bank! The dual silicone High-Tear resistant jacketing with fiberglass matting, gives you the highest heat protection and superior terminal pull off values in the business! With our 300ohm per foot Wire-Wound magnetic suppression core, you can be sure of maximizing the voltage output of your ignition system, while maintaining high EMI resistance values. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery. Ultra High heat silicone spark plug boots provide superior radiant heat protection. High dielectric strength properties virtually eliminate voltage leakage and blow through. With all of these features built into our Summit Racing high-end 8mm sets, along with Made in the USA workmanship, you can be assured that installing one of our sets will give you the confidence and reliability you have come to expect from Summit Racing products.
( 1008 )
$55.99
—
$57.99
Want to maximize the performance of your current HP Tuners setup? HP Tuners offer computer programmer accessories, from USB cables to OBD-2 cables, EIO plugs, and more. These quality hardware components can be used as replacements for worn or misplaced originals, or to upgrade your existing setup.
( 15 )
$89.00
ACDelco coil and ignition wiring harnesses will spark renewed energy for your engine. Wiring harnesses can deteriorate over time, leaving them unable to deliver the necessary voltage for power. Replace worn wiring with ACDelco coil and ignition wiring harnesses and keep the spark alive!
( 20 )
$106.99
ACDelco GM Genuine Parts mass airflow sensors are a key part of the engine management system, and they are GM-recommended replacements for your vehicle's original component. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. These original equipment mass air flow sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 22 )
$58.99
—
$88.99
Dragon Fire High Performance Series spark plug wire sets deliver industry-leading performance, quality craftsmanship, and long-term reliability. At the core of these wires is a strong Kevlar® center with a low-resistance spiral-wound alloy conductor, tightly wrapped for maximum spark energy transmission up to 80,000 VAC. A high dielectric strength co-polymer compound coating is applied to the conductor to help eliminate voltage leaks and Radio/Electromagnetic Frequency Interference (RFI/EMI). The conductor is fully insulated in a durable, extra-thick silicone and EPDM sleeve for superior protection. All terminals are protected by heavy-duty, extra-thick walled, high-temp silicone boots to ensure optimal spark delivery and long service life. Heat Rated to 600° F. Designed as a direct replacement set, these spark plug wires are heat-rated to 600 degrees F. Order the set recommended for fitment on your vehicle.
( 14 )
$59.95
Morimoto projector headlight conversion harnesses are designed to adapt the 2009+ Dodge Ram projector-style headlights onto trucks that came standard with the basic dual halogen headlamps. The harnesses enable you to upgrade to the most modern Ram look without cutting, splicing, or modifying anything on the truck's factory harness. It's a seamless plug-and-play solution to keep your low and high beams under control on the new OEM projector lights using the original controls inside the cabin. The outputs will plug directly into the multi-pin connector on the back of each headlight from Dodge. Note: These adapters are tested and work on OEM/TYC headlights. At this time, they do not work on DEPO aftermarket headlights.
( 2 )
$94.00
ICT Billet LS ignition coil wiring harness extensions are assembled with OEM tooling, connectors, locks, seals, and terminals. They utilize factory harness wire colors. Compatible with any GM LS engine, these extensions are great for remote locating coils under the engine for a custom look. Don't take a chance with cheap wire connectors that use poor-quality components and have conductivity issues. Choose ICT Billet LS coil wire harness extension length and model recommended for your application.
( 2 )
$105.99
Summit Racing™ LS ignition coil wiring harness extensions are assembled with OEM tooling, connectors, locks, seals, and terminals. They utilize factory harness wire colors. Compatible with any GM LS engine, these extensions are great for remote locating coils under the engine for a custom look. Don't take a chance with cheap wire connectors that use poor-quality components and have conductivity issues. Order the harness length needed for your application.
Not Yet Reviewed
$71.99
Denso developed the auto industry's first compact stick-type ignition coil. The space-saving design of Denso ignition coils requires no high-tension ignition cables, fitting neatly into the engine's spark plug bore. Along with its stick coil technology, other advanced features include micro-sized driver circuits and diagonal inductive windings. That same expertise is put to use on all Denso ignition coils regardless of their configuration. Each Denso ignition coil is designed and optimized for its specific application, then continually improved by Denso's global engineering team. One key to effective combustion in today's low-emission, high-efficiency engines is consistent, high-energy ignition output. Denso direct ignition coils deliver it. Additional features and benefits of Denso ignition coils include: * Integrated driving circuit in the top of the coil * Superior-quality components and materials ensure optimal performance * Tested and inspected to ensure high quality * Diagonal windings eliminate sectioned bobbins, reducing size and weight * Improved coil efficiency lessens the need to generate high voltage * Eliminates phantom misfires * Small in size, light in weight, and easy to install * Provides maximum available voltage under all operating conditions
( 97 )
$50.99
—
$96.99
BBK oxygen sensor extension harness sets are direct plug-in designs to prevent the cutting and lengthening of your oxygen sensor wires. They are ideal for full-length headers and other specific applications.
( 45 )
$69.99
—
$74.99
ACDelco GM Genuine Parts oxygen (O2) sensors are special feedback sensors on your vehicle's exhaust system and are GM-recommended replacements for your vehicle's original components. They measure the proportion of oxygen in exhaust gases, then using the measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Choose the O2 sensor designed for your vehicle.
( 107 )
$53.99
—
$74.99
ACDelco Gold Automotive AGM batteries have high-cycling capabilities, are remarkably charge-receptive, and are necessary for start/stop applications. These batteries are also maintenance-free, 100 percent pressure-tested against leaks, and are manufactured to resist corrosion. Best of all, they are backed by ACDelco's outstanding warranty coverage. When reliable starting power is a priority— ACDelco Gold Automotive AGM batteries are the answer! Additional features include: * Absorbed Glass Mat design is 100 percent leak and spill-proof, because the electrolyte is permanently held in the glass mat separator, instead of free flowing within each cell * Oxygen recombination reduces water loss and reassures maintenance-free performance * ACDelco Gold Automotive AGM batteries have longer life expectancy in traditional vehicle applications, due to a maintained pressure on the plates, which significantly reduces the amount of active mass lost from the grid
( 309 )
$102.99
The average vehicle today has hundreds of wiring connectors. ACDelco connectors are available for everything needed, from antennas to trailer wiring, as well as an array of multi-purpose connectors to maintain the optimal operation of your vehicle. Choose GM-recommended replacement wiring connectors to ensure the same performance, durability, and service life you've come to expect from General Motors products.
( 35 )
$64.99
Summit Racing™ offers OEM GM flex fuel sensors for a wide range of applications, including many Chevrolet, GMC, Buick, and Cadillac models from 2011 and up. These replacement sensors measure the ethanol/gasoline ratio of the fuel being used—and then send a signal to your ECM so adjustments can be made for optimum operation of your flexible fuel vehicle. The sensors are made from factory materials and specs to ensure proper fit and performance. Ensure the fuel system efficiency you expect; order the model recommended for your vehicle.
Not Yet Reviewed
$79.99
No matter how well the engine in your vehicle is built, it's not going anywhere on its own without quality spark plug wires. Hinson Motorsports 500 ohm spark plug wire sets will get your vehicle humming—and keep it purring down the road. These 8.5mm super conductor wires feature a spiral core, and are available for fitment on a variety of make/model applications.
( 21 )
$59.99
—
$62.50
Manufacturer Rebate
Taylor 409 Pro Race Spiro-Wound core spark plug wires are high-tech, high performance wires available for the street or track. They provide continuous heat protection up to 600 degrees F and 102,000 V of dielectric strength. A tightly woven, heat-treated fiberglass braid is applied over 100 percent pure silicone 8mm ignition wire. These sets are available in black, red, and blue with color-coordinated, 100 percent silicone Pro Boots bonded to the wires. They also feature vibration-proof, double spring locking plug terminals. The Spiro-Wound core is for use when RFI suppression is required for maximum firepower without radio interference. Taylor 409 spark plug wires are a must for multiple discharge ignition systems, onboard computers, and electronic ignitions. Order the set and options designed for your vehicle and engine application.
( 297 )
$106.60
ICT Billet remote mount coil brackets mount eight coils and are designed to work with a wide variety of LS engine swaps. They are available to fit most OE and some Holley EFI coils. Made from aerospace grade billet aluminum, most feature a natural finish. The kits include two sets of brackets, bolts, and spacers where applicable. They work great for turbo setups or whenever a clean-looking engine bay is important. Most ICT Billet remote mount coil brackets are designed to be used with LT1 Camaro ignition wires.
( 20 )
$61.99
—
$72.99
How important are ignition coils to the performance of your vehicle? Well, without them your spark plugs would never receive the high voltage needed to ignite the fuel. Securing them is also important—and that's the function of ICT Billet ignition coil brackets. Made from aerospace-grade aluminum, these brackets offer mounting points for a variety of coil styles. The brackets are available in different configurations and finishes; hardware is also included. Choose the brackets designed for fitment on your make/model.
( 27 )
$58.99
—
$87.99
The new standard in ignition wires for racers on a budget! Moroso Ultra 40 unsleeved custom-fit ignition wire sets are the most powerful and RFI/EMI-resistant wires available for racing today. Plus, their closely woven fiberglass, silicone-impregnated insulation provides up to 8,000 extra volts of protection. Features: * Kevlar® core that's four times stronger than Aramid cores * Class-leading 40 ohms of resistance per foot * Nickel copper alloy conductors for superior spark energy transfer * Extra-thick EPDM layer for greater dielectric strength * High-temperature silicone boots that can withstand heat up to 600 degrees * Locking stainless steel plug terminals
( 136 )
$93.99
—
$101.99
Outshine the competition in both looks and performance with Taylor Spiro-Pro universal spark plug wire sets. Order the model that's compatible with your engine application. Features include: * 100 percent silicone inner core and outer jacket * Spiro-wound core consists of highly conductive resistor conductor spiral with stainless steel wire, covered with a fluorocarbon conductive material * More firepower to the spark plugs than OEM resistor core wires, and up to 10 times less resistance than standard resistor core wires * Eliminate radio frequency interference (RFI) * Highest temperature-rated wire on the market (600 degrees F) without the need for additional sleeving * Taylor's exclusive low-profile, vibration-proof, 100 percent silicone Pro Boot with grips * Double spring-locking spark plug terminals * Choice of many vibrant colors
( 2 )
$94.40
On Sale
Summit Racing brings you our ultimate ignition wire with our 8.5mm 50ohm wire sets. They are made with 100% high tear resistant silicone construction, a 50ohm per foot Wire-Wound FERRITE magnetic suppression core, stainless steel and brass terminals and extreme heat-resistant boots. Only the highest quality raw materials and Made in the USA workmanship, go into every set. The 100% High-Tear resistant silicone jacket protects the inner ferrite core from heat breakdown. The dual silicone layers are bonded together using a tightly woven fiberglass matting that virtually eliminates terminal pull off. Our 50-ohm ferrite core has over 3 FEET of nickel/copper mag winding per INCH! With this tightly wound core, you can be assured that your spark plugs are getting all the power your ignition system can provide. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used on all applications; for superior connection and consistent voltage delivery. High heat silicone and high dielectric strength polymers make up the extreme composition of the spark plug boots. Our boots provide superior radiant heat resistance for longevity and high dielectric strength properties to prevent voltage leakage. With all of these features built into our Race-proven 8.5mm 50-ohm sets, you can be assured that installing one of these sets on your engine will give you all the performance and durability you have come to expect from Summit Racing products.
( 195 )
$68.99
Modal Header