Availability
Showing In Stock Items. Show All 87 Items.
The locker sensor in Wrangler JL and Gladiator Rubicons have started to become problematic. When they fail, it usually starts out as a blinking locker indicator on the dash, which then ends up in a "service axle locker" message and the lockers will no longer engage. The repair would normally be to replace the sensor or the locker assembly, but they are not available, so the entire axle assembly needs replaced. Developed in a partnership with Americas Most Wanted 4X4, Z Automotive Jeep JL/JT Z-Locker OEM controller harnesses provide a simple fix for faulty OEM axle locker. Each harness will bypass the problematic sensor, allowing the locker to operate without the position sensor and provide the proper feedback to the Jeep's computers to keep the system operational without any errors or warnings. You get fully functioning lockers with no side effects. Installation is simple and they will not harm the Jeep's computers as they use the same signaling that it expects from the sensor. The connectors are the same ones used by Jeep and are watertight.
( 28 )
$179.00
Motive Gear master ring and pinion installation kits include everything that's in their regular differential kit—plus pinion shims, carrier shims, and ring gear bolts (where applicable). You also have the option of upgrading to higher quality bearings by adding "T" to the end of the part number on some models. Make a better choice for your ring and pinion installation with Motive Gear differential master bearing kits. Order the model designed for your vehicle application.
( 336 )
$108.99
—
$209.99
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 283 )
$168.99
—
$251.83
BMR cradle bushing lockout kits reduce wheel hop, deflection, and cradle movement—with virtually no change in NVH. They're specifically designed to fill the voids in the factory bushings (front and rear). The additional hollow space is filled with CNC-aluminum "bullet" inserts. The kits are finished with laser-cut stainless steel washers that capture the lower Delrin inserts and prevent up and down movement. These bolt-on kits use existing holes and hardware, allowing for easy installation with simple hand tools. Choose the model designed for fitment with your vehicle. When subframe performance is a must, rely on BMR Suspension!
( 7 )
$299.95
Mile Marker Supreme lockout hubs offer all-metal construction. Built to exacting standards, they feature patented technology and smooth operation for the performance that you expect and need. Supreme lockouts are available for many applications, domestic and import, and come in your choice of great looking chrome or stainless steel. These hubs are made by die-casting aluminum into pre-made stainless jackets for the ultimate combination of light weight and corrosion resistance. Replace your old hubs with ones made to be abused--Mile Marker Supreme lockout hubs.
( 191 )
$245.99
Rust, rocks, and road debris all take part in destroying differential covers—so Spicer Drivetrain Products introduces a line of axle-specific replacements. These kits include a new cover, plug, and installation bolts for an all-new look. They're available in a variety of materials and finishes for high strength and good looks. The differential covers are offered for the front or rear with select options for your particular application.
( 94 )
$160.93
—
$228.99
Richmond Gear EXCel ring and pinion sets are manufactured to meet the exacting specifications required by Richmond Gear. The design, tooling, steel selection, and heat-treat recipes are all controlled by Richmond Gear to produce cost-alternative ring and pinion sets. The Richmond Gear EXCel ring and pinion sets offer exceptional value with better-than-OEM quality. Available in a wide variety of gear ratios, the Richmond Gear EXCel ring and pinion sets will give you maximum confidence in your differential.
( 140 )
$148.99
—
$244.96
ACDelco GM Genuine Parts CV axle shafts transfer torque from your vehicle's transmission or differential to its wheels, and are GM-recommended replacements for your vehicle's original components. These shafts have constant velocity (CV) universal joints at each end to allow your wheels and suspension to articulate. The axle shafts have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Order the model recommended for your specific application.
( 15 )
$139.99
—
$206.50
Z Automotive Jeep JL/JT Z-Locker controller harnesses are plug-and-play solutions to aftermarket locker integration using factory locker controls on Wrangler JL and Gladiator Rubicons. These simple adapters use watertight connectors, a potted design, and automotive-grade internal components to last in the harsh Jeep undercarriage environment. One end of each adapter plugs into the 4-pin factory harness, providing the required signals to keep the Rubicon locker control logic satisfied. The other end is a 2-pin connector which will output 12 V to engage your E-Locker or Air Locker solenoid. Z Automotive Jeep JL/JT Z-Locker controller harnesses retain the factory locker switches, dash messages, warnings, and will even set off the "service locker" message if your aftermarket locker is faulty or gets disconnected.
( 1 )
$179.00
Spicer Drivetrain Products rear axle shafts feature application-specific design and engineering, quality materials, precision manufacturing processes, and statistically-controlled testing. Through induction heat treating with a slower scan rate, Spicer delivers more consistent and stronger axle shafts. In addition, the cold-formed rolled spline eliminates the need for machining, which can cause stress fractures and premature failures. The Spicer Drivetrain rear axle shafts are available in a variety of styles, configurations, and options to fit your specific rear axle type.
( 51 )
$231.99
—
$244.99
Ford Genuine Parts 4WD actuators are the perfect-fit replacements to help you fix 4x4 engagement issues. If your actuator is sticking, vacuum will remain applied to your wheel hubs, keeping them disengaged, and leaving you without 4WD. Ford Genuine Parts 4WD actuators will control vacuum and allow engagement, restoring your 4x4 power.
( 2 )
$218.99
Motive Gear offers differential carrier cases for thousands of applications from 1955 and up. These replacements feature rugged steel construction and will accept all of your factory internal parts without any modifications. Models are available for countless differential case design types, including Chrysler, Dana, Ford, GM, and Toyota. Keep your wheels turning effectively; order the case and options recommended for your vehicle.
( 24 )
$170.99
Add some style and durability to your ride with Ford Performance Parts differential covers. Each cover is made of top quality materials and given a rugged powdercoated finish to ensure they stay looking good no matter the conditions. Upgrade your differential cover with Ford Performance Parts.
( 9 )
$180.99
Cardone products are the highest-quality new manufactured parts in the aftermarket. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their manufacturing processes can only be found behind the Cardone name. For the past 40 years, Cardone's innovative manufacturing processes have provided a high-quality, lower-cost alternative to replacement parts. Add to that a new part number release program offering the latest-model coverage, and you get a winning combination! It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot—Cardone is your one source for replacement hard parts. Additional features of Cardone new CV drive axles: * The most advanced engineering and manufacturing processes to provide you with high-technology replacement parts * Neoprene boots resist ozone, eliminating cracking, a leading cause of CV boot failure * 3 percent moly grease provides excellent high-temperature and pressure characteristics, extending the life of the joint * All axles are supplied with a new axle nut, replacing the worn or damaged existing axle nut * Rolled axle splines guarantee the proper installation of the axle into the hub and transmission * Rolled threads guarantee the proper installation of the axle nut Order the replacement model designed for your vehicle application.
( 215 )
$100.99
—
$114.99
Eaton master differential installation kits make upgrading your differential easier by providing all the components needed to properly setup your Eaton differential or replace your ring and pinion, all in one box. They include premium bearings and components to ensure long life and quiet operation. For a smooth installation, choose the kit with the best parts designed to deliver the best performance--Eaton master differential installation kits. Order the kit best suited for your application.
( 8 )
$145.99
GSP new CV axle assemblies are engineered to provide OE fit, form, and function. Premium materials, coupled with precise machining and balancing, ensure smooth, vibration-free performance in all driving conditions. All axles are thoroughly inspected for quality and workmanship. Additional attributes of GSP new CV axle assemblies include: * Since boot failure is the main cause of CV axle failure, GSP axles use only premium-grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity * Assembled with a specially formulated, high-temperature moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
( 82 )
$106.99
—
$193.99
Motive Gear differential bearing kits contain everything you need to install your ring and pinion. Available for front or rear axles, the kits are offered for nearly three dozen differential case design applications. Includes: * Front and rear pinion bearing * Pinion seal * Carrier bearings * Pilot bearing (depending on application) * Gear marking compound * Crush sleeve * Pinion nut * Brush * Thread locking compound * Cover gasket or RTV
( 25 )
$118.99
—
$237.99
Ford Performance Parts ring and pinion sets are engineered, manufactured, and tested for maximum performance. These ring and pinion sets are finished in a black oxide coating for corrosion resistance, and are available in many different ratios to fit a variety of Ford differentials.
( 130 )
$210.99
—
$243.99
When off-road, encountering obstacles and hazards that could inflict expensive damage to your differential is inevitable. ARB differential covers are made from high-tensile strength nodular iron (tougher and harder than carbon steel); they are engineered to protect the differential and ring and pinion from off-road hazards. Available for a select line of differentials, they are offered in red or black powdercoated finishes. Features of ARB differential covers include: * Computer-optimized, cross brace design increases the structural rigidity of the entire axle * Helps keep the ring and pinion gears meshing on the flat faces of the teeth--greatly increasing ring and pinion life and overall strength * Top-quality, rare earth magnets on both the drain plug and dipstick collect metallic particles * Dipstick magnet allows the oil to be checked for tell-tale signs of internal damage * Prolonged carrier bearing life (especially on high-output vehicles) from improved support of bearing alignment * Approach/departure angles optimized by angled exterior surfaces that minimize hang-ups * Unique dipstick/filler cap design allows differential oil level to be adjusted for rotated differential housings * Low-profile drain plug resists damage from obstacles * High-strength cap screws (included) are recessed into the cover for impact protection
( 26 )
$209.95
—
$219.95
Ford Performance Parts Traction-Lok differentials optimize your vehicle's traction by transferring the power to both rear wheels. These limited slip differential units use heavy plate-style clutches to ensure your engine's full power potential makes it to the ground. Perfect for the street or strip, these differentials will accommodate the anti-lock brake exciter ring found on most late model vehicles.
( 37 )
$220.99
Yukon Gear & Axle offers a full line of differential covers to suit your front or rear applications. These replacement covers protect your gears, keep lubricating fluid where it's needed—and on some styles, they offer added cooling and/or strength. Their large selection affords you options of materials, sizes, and finishes to get exactly what you need. Order the model recommended for your axle, differential case design, and engine specifications.
( 65 )
$200.99
Get the right traction with Standard Motor Products 4WD selector switches. These 4WD dash mount OE replacement switches keep your rig ready for on and off-road adventures. Standard's robust switches are built with high-grade materials to meet your stringent demands. You're ready to travel on path or pavement, in wet or dry conditions, when you replace your old 4WD selector switches with new ones from Standard Motor Products.
( 5 )
$132.99
—
$261.99
Locking hubs are popular accessories for preparing to engage or disengage your front wheels in a 4WD vehicle. Through years of use and abuse, your locking hubs may become damaged or well worn. Dorman stocks a line of direct fit replacements to ensure proper 4WD operation. Whether automatic or manual units, they're manufactured using high quality materials for long lasting durability. The hubs are available for specific differential types, so match up your specs with the correct Dorman parts.
( 4 )
$135.95
Spicer Drivetrain Products' master differential rebuild kits are their most comprehensive axle overhaul kits and come complete with everything you need for ring and pinion gear installation or a thorough and lasting repair. They're the highest quality mix of bearings, cups, and cones--each precisely selected for maximum performance in every position and application. Production upgrades ensure that these genuine Spicer parts are as good as, or better than, the OE parts they replace. Order the kit designed for your make, model, and axle application. Most master overhaul kits include: * Ring gear bolts * Pinion head and tail bearings * Differential bearings * Pinion seal * Pinion nut * Collapsible spacer (where applicable) * Pinion adjusting shims * Differential adjusting shims * Snap rings (where applicable)
( 2 )
$174.99
—
$207.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
