Availability
On Sale
Amplify your driving experience with a Fleece Performance Cheetah turbocharger. Featuring a Fleece exclusive 63mm FMW compressor wheel and a high-flow turbine wheel, these turbos are capable of supporting up to 650 rear wheel horsepower without sacrificing any drivability. These drop-in replacements offer smooth and quick throttle response with big top-end power. Whether you're towing, racing, sled pulling, or just driving to work, the Cheetah will get the job done. Order the model recommended for your truck.
( 2 )
$2,999.00
$2,549.15
BD Diesel Killer grid heater upgrade kits are purpose-built to address a major flaw in the 6.7L Cummins engine--the electrical connection to the intake grid heater. When powering the grid heater, 200 amps pass through a small bolt and nut inside the intake and over time is known to deteriorate and eventually arc and break off. The nut drops into the engine, leading to extensive damage to the piston, head, and valves. BD's Killer kits upgrade that flawed electrical circuit by eliminating the problematic bolt and nut inside the intake while retaining stock functionality of the heater. The kits are cost-effective and easy to install. Additional features: * Allows for full heat output with the stock intake grid heater * Fully emissions compliant * No modifications or tuning required * Self-locking threads built into the lower busbar prevent backing out and compromising electrical connection * Kit includes replacement hardware and gaskets, along with special tools required for the job
( 3 )
$206.95
ICT Billet high-flow intake plenum plates are cut from heavy-duty aerospace-grade billet aluminum. Most are 1/2 in. thick and are machined on the back side for increased plenum flow. Choose ICT Billet high-flow intake plenum plates for your engine upgrade.
( 3 )
$99.99
On Sale
FASS Fuel Systems Titanium Signature Series fuel/air separation systems are a beneficial upgrade for your diesel engine. Titanium systems feature compact designs, powerful motors for improved fuel flow, and advanced filtration that's far superior to your factory fuel filter. Their diesel fuel lift pumps are engineered to be top performing, reliable, long-lasting units—and are backed by a limited lifetime warranty on all light-duty diesel applications. The Signature Series also features FASS revolutionary Whisper Technology that effectively and drastically reduces the sound levels of these diesel systems to a "whisper," while at the same time increasing fuel flow rates. Whether stock or highly modified, FASS Titanium Signature Series diesel fuel systems are available to handle your engine's horsepower. Features and benefits: * Systems available with flow rates up to 290 gph * Advanced filtration removes water, air, vapor, and debris with a filtration rating of 2 micron * Smoother engine idle * Protects and extends the life of your injectors * Whisper Technology (FWT)—reduces noise levels without reducing flow rates * Performance Radius Cuts (PRC)—advanced machining technique creates smooth cuts within aluminum housing * Improved fuel volume delivery * Mass Flow Return (MFR)—technology used to continually "polish" your fuel by keeping positive pressure on fuel being delivered to your engine, guaranteeing the cleanest fuel possible. Also prevents cavitation, along with galling and scoring. * Improved cold weather starts * Decreases carbon monoxide and carbon dioxide emissions * Easier bolt-on bracket mounts do not require any drilling or welding to mount new pump * 1/2 in. fuel lines and ports * Fuel mileage improvement * 30,000 mile filter life expectancy
( 58 )
$699.00
—
$729.00
$629.10
—
$656.10
On Sale
Installing a Titanium Signature Series fuel system has never been easier, or more affordable. Designed to simplify installation, FASS's No-Drop Series diesel fuel system kits include their fuel sump, which prevents the need for removing your fuel tank. Better still, these No-Drop kits offer significant savings over buying a Titanium Signature Series fuel system and sump kit separately! They include everything you need for a simple, straightforward FASS installation--and nothing you don't. Select the kit designed for your diesel truck. No-Drop kit benefits: * Increases fuel lubricity at least 10 percent * Can increase 3 times the life of injection components * Removes over 99 percent of the water from fuel * Eliminates entrained air and vapor * Filters out debris down to 2 microns absolute * Provides far more fuel flow than OEM * Drastically simplifies installation
Not Yet Reviewed
$769.00
—
$899.00
$692.10
—
$809.10
S&B Filters cotton filter cold air intake kits are designed to improve airflow and bring down the temperature of the air that enters your engine. To achieve more airflow, S&B oiled cotton filters are built with four layers (or eight for diesels) of the highest-quality cotton gauze. They use deeper, wider pleats with more per filter. Plus, their manufacturing process yields almost no "bleed", creating a greater open surface area. All of this adds up to more airflow with excellent protection. The filter elements are washable, reusable, and will protect your engine from harmful dirt and debris. Gain performance and a sporty, high-tech appearance under the hood of your rig with an assist from the S&B Filters cotton filter cold air intake kit best suited for your application. More product features, items, and specifications include: * Silicone rubber (not urethane) filters and couplers help ensure they won't degrade or crack, while resisting temperatures as high as 400 degrees F * Helps balance air/fuel ratios to improve gas mileage * Cross-linked intake tube minimizes restriction * Custom air box (where applicable, including some with clear lids) keeps loose dirt and turbulent underhood air out of your intake * Specific year, make, and model design makes them simple to install, with help from the easy-to-use installation instructions and illustrations * Included mounting hardware for replacing your stock assembly in 30 minutes or less in most cases
( 437 )
$349.00
Lots of cool, clean air has been shown to increase horsepower—and these cotton replacement air filters from S&B deliver both unrestricted flow and high filtration. The 8-layered cotton filters protect your engine from harmful dirt and debris, while the couplers and end caps are manufactured from premium silicone rubber to help prevent cracks. And because the filters are cleanable and reusable, they're a great performance value. S&B Filters elements are available in numerous styles and sizes for compatibility with nearly any engine bay. Select from nearly a hundred universal and application-specific models.
( 59 )
$69.00
VaraRam VR Air Grabber Ram Air induction systems are designed to draw in air from the high-pressure zone between the upper core support and the underside of the hood. They feature a high mount location with water drains to ensure that mud or even water over 2 ft. deep will not create any issues. They are true forced induction systems that are intercooled and will help you gain up to 30 hp and 30 lb.-ft. of torque without any tuning. They are guaranteed to improve your quarter-mile times, as well as your 0-60 time. So, if you're looking for an extra boost in power and want to create a look that screams pure MOPAR power, these VaraRam VR Air Grabber Ram Air induction systems are just the thing for you!
( 12 )
$426.99
DeatschWerks fuels your passion for performance with fuel injectors specifically designed and engineered for your Sport Compact, Modern Muscle, and European vehicles. DeatschWerks fuel injectors are manufactured to fit your OE harness, fuel rail, and manifold. Because they are application-specific, you'll spend less time installing and tuning, so you can spend more time enjoying the increased performance of your ride! They provide an excellent spray pattern and atomization for optimized idle and tuning. Each set is flow-matched both statically and dynamically, and flow-balanced to within one to two percent. A flow report is included with each set of DeatschWerks fuel injectors.
( 69 )
$439.00
—
$1,589.00
BD Diesel Screamer turbochargers may offer a stock drop-in installation and appearance, but they are anything but stock! They feature a larger ballistic billet compressor wheel and BD's exclusive turbine profile that results in reduced backpressure and increased turbine flow compared to the competition. You get more potential maximum power output, right up to 690 hp with performance modifications. Each turbocharger is high-speed balanced with the actuator stroke tested prior to shipping.
( 2 )
$2,995.00
Have you always wanted a cold air intake with a disposable filter--without sacrificing performance? S&B Filters dry filter cold air intake kits offer airflow comparable to their cotton filters with the same great protection. They typically last for 15,000 miles of highway driving and you can extend the life of the filter by blowing it out with compressed air (up to three times). Your rig will not only gain performance, but also a sporty high-tech appearance under the hood. In addition, the filters and couplers are made with silicone rubber, not urethane, to help ensure they won't degrade or crack and can resist temperatures as high as 400 degrees F. These intake kits are simple to install, and the great looking signature clear lid allows visual inspection of your filter at all times. Remember, there are good air intakes … and then there are the better intakes--demand the better; choose the efficiency and style of S&B Filters cold air intake kits. Features include: * Helps balance air/fuel ratios to improve gas mileage * Specially-crafted cross-linked intake tube minimizes restriction * Custom air box keeps loose dirt and turbulent underhood air out of your intake * Custom-made for your specific year, make, and model * Easy-to-use installation instructions and illustrations * With the included mounting hardware, replaces your stock tract in 30 minutes or less
( 61 )
$349.00
S&B offers dry cleanable replacement filters for their cold air kits. The massive, highly-efficient air filters result in better performance while also protecting your engine. The 8-layer dry synthetic media trap dirt, dust, and debris before they can damage key components. These filters feature a black powdercoated steel cage for added protection. Feed your engine massive amounts of airflow, courtesy of an S&B replacement filter. Order the model recommended for your truck and engine application.
( 33 )
$69.00
BBK Power-Plus Series throttle bodies have you covered when it comes to increased airflow for your late model vehicle. These Power-Plus units are cast from high-quality 356 aluminum alloy and are machined on state-of-the-art CNC centers to ensure a perfect fit on your car or truck. Their features include double-sealed bearings, O-ringed throttle shafts, and precision die-stamped linkages—so you know you're getting the best quality throttle bodies at the best value possible.
( 397 )
$409.99
—
$549.99
On Sale
PowerFlo is the latest OEM replacement performance in-tank lift pump from the diesel experts at Fleece. It's the only in-tank lift pump capable of supporting up to 800 hp, including dual CP3 pump configurations! The PowerFlo assemblies retain the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines—and installation takes half the time of other high-flow pumps. Two is always better than one, and the PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the 1/4 tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. Order the Fleece Performance PowerFlo in-tank lift pump assembly recommended for your vehicle.
( 7 )
$799.00
$679.15
S&B Filters fuel tanks maximize the space under your diesel truck and empower you to fly by more gas stations like a compact, fuel-efficient car. The folks at S&B know even lifted trucks often sacrifice clearance for larger holds. That's why they design their tanks with a contour around the driveshaft area, helping you maximize clearance. A transfer pump fitting allows you to pull fuel from your now larger tank for equipment—saving valuable space in your truck's bed. Spend less time at the pump and more time driving with the S&B high-capacity replacement fuel tank designed to fit your vehicle. Features, items, and specs: * Brass vent and rollover vent valve * Included baffles cut down on fuel sloshing * Integrated fuel sump for aftermarket fuel pumps * Integrated OEM-style fitting for sending unit installation ease * Front cradle support design (instead of a band that wraps under) to help avoid band debris damage and failure where it's most likely to occur * Front support skid plate on some models * No modifications necessary for installation
( 5 )
$1,249.00
—
$1,349.00
BluePrint / Holley Sniper EFI fabricated intake manifolds continue to push the aftermarket with low-profile intakes for the popular GM LS engine family. They're good looking, perform well, and offer great value for a performance sheet metal style intake manifold. Each unit is ready to bolt on out of the box, is designed to accept Sniper high-flow throttle bodies, and includes a high-flow fuel rail kit. This updated design was developed to allow the end user to fit under a stock hood. Each manifold is precision fixtured, welded for a perfect fit and maximum structural integrity. Your choice of throttle body opening sizes of 92mm and 102mm are available. Additional details: * Low-profile design (overall 1.875 in. shorter) allows fitment under stock hoods on Corvette, Camaro, Firebird, GTO, and others where hood clearance is at a minimum * Shortened runners allow for compact design. Overall plenum volume maintained by increasing the overall width of the plenum and increasing the overall dimensions of the runner * 3mm (1/8 in.) thick T6061 sheet aluminum construction, strong and durable even under high horsepower and boosted conditions * 100 percent TIG-welded * Intakes include 3/8 in. fuel rail kits with -8 AN fittings and crossover braided line capable of supporting 750+ horsepower (laser-engraved Sniper logo) * Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders
( 1 )
$569.95
Standard Motor Products fuel injectors help you attain maximum fuel efficiency and power from your engine. Properly operating injectors are essential components for enabling your vehicle to run flawlessly. These OEM stock replacements are available for hundreds of specific applications. Don't drive with faulty fuel delivery. Update worn or malfunctioning fuel injectors with reliable models from Standard Motor Products.
( 250 )
$34.99
—
$823.99
aFe Power offers throttle bodies for a variety of applications, including many Toyota vehicles from 2003 and up. Product details (model 46-39103): * Brand new 76mm throttle body * No tuning required * Plug-n-play electronics * Billet aluminum adapter * More power and better throttle response * Hardware and gasket included * Direct bolt-on for simple installation * Larger bore throttle body: This aFe Power 76mm throttle body and adapter kit improves engine airflow over the stock 65mm throttle body. The extra airflow will increase horsepower and throttle response. This kit will work with OEM or aFe cold air intakes. Performance gains will be more noticeable as more upgrades are added to the vehicle. *6061-T6 billet aluminum adapter: All adapters are constructed from 6061-T6 billet aluminum and are precision-machined for light weight, high strength, and perfect fit and finish. The serrated/swirl combination design creates intake turbulence in the combustion chamber which breaks up the fuel, creating a more complete combustion cycle—increasing horsepower, torque, and improving throttle response. * Simple installation: Throttle body kit uses all factory mounting locations, providing stability and a hassle-free installation. All needed hardware is included with the kit. * Installation note: Idle will run high on some vehicles but will readjust once the ECU learns to properly control the idle (this can take up to 800 miles on some vehicles).
Not Yet Reviewed
$414.75
—
$523.95
On Sale
Eliminate the installation headaches associated with non-flexible OE drain lines with Fleece Performance silicone turbo drain tube kits. Each kit features a larger inner diameter, smooth silicone hose for longevity and durability, and black anodized billet aluminum flange with integral O-ring for leak-free performance. Fleece's patent pending drain hose simplifies turbocharger installation and will ensure proper oil drainage from your turbocharger. Kits include new fasteners and are designed for use with all Cummins equipped Dodge Ram factory-style turbochargers, VGT or HX35 and HY35-style turbochargers, as well as aftermarket drop-in replacements, like Fleece's Cheetah Series. Choose the turbo drain line kit designed for your Cummins.
( 3 )
$94.99
$80.74
On Sale
Holley EFI Gen III Hemi Hi-Ram intake manifolds are for high performance applications where induction system height is not limited. Able to add even more power to your engine, these manifolds have large intake ports and a modular base design with runner lengths and tapered cross-sections that will perform well for a wide range of engine configurations. Their aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, and street-rod applications. Holley EFI Gen III Hemi Hi-Ram intake manifolds feature cast aluminum construction offered with a natural satin or black finish. They are available with either a 95 or 105mm LS-style throttle body or as the manifold base alone for custom induction systems. Features and benefits: * Modular design base accepts a wide range of EFI tops and can be used as the foundation for custom induction systems * EFI fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system * Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7L to 7.2+L range, and maximum power at 7,500 to 8,500 rpm * Works with Gen III Hemi injectors and Bosch EV-1 style injectors * O-ring seal to head offer superior OE-style sealing and are easy to replace * Billet oil fill cap offers an attractive low-profile design * Positive Crankcase Ventilation (PCV) ports with adapter fittings * Port for OE-style Manifold Absolute Pressure (MAP) sensor (1 or 2 Bar) * Cast-in pads for adding nitrous nozzles
( 2 )
$949.95
—
$1,499.95
$853.95
—
$1,348.95
On Sale
Holley single plane carbureted intake manifolds are designed to provide a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The carburetor mounting pads will accept all stock or aftermarket square-bore carburetors with manual or electric chokes. These Holley intake manifolds are also engineered to accept most stock hardware and accessory brackets—but offer performance features like: an updated plenum divider area; a 1 in. shorter height than their Strip Dominator manifold; and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance. Features include: * Single-plane with isolated plenum * Square-bore carburetor mounting flange * Isolated water crossover * Power band: 2,500 to 7,500 rpm * Height: Front 4.18 in., rear 5.28 in. * Port size: 1.92 in. height, 1.20 in. width
( 9 )
$573.95
$515.95
—
$549.95
On Sale
K&N 63 Series Aircharger high performance cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 63 Series Aircharger cold air intake kit best suited for your application!
( 602 )
$367.99
—
$419.99
$317.99
—
$369.99
Bosch fuel pressure regulators are designed to maintain proper fuel pressure on your fuel injected engine. They are available in different styles and will fit your EFI system without any modifications. Keep your engine happy with one of these Bosch fuel pressure regulators.
( 20 )
$120.99
—
$129.99
CNC-machined from aluminum extrusions, these Edelbrock aluminum fuel rails have a flow-through design and fittings on both ends where applicable. Designed for Edelbrock EFI manifolds, they come with all necessary hardware.
( 61 )
$242.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
