2015 Exhaust | Summit Racing

American Racing Headers C7 Corvette Headers

American Racing Headers C7 Corvette headers are available with options that allow you to fine-tune your exhaust system to match your upgrades. ARH C7 systems set the bar for quality, performance, fit, and ease of installation. Options include a variety of primary sizes and your choice of X-pipe midsection diameters, ARH's exclusive X-pipe forward location (on select models), and severe-duty cats. Long systems end at the rear axle and are a direct fit to stock or aftermarket axle-back exhausts. ARH also offers mid-length header systems; a more emissions friendly option for C7s. Their mid-length kits allow you to reuse the secondary set of factory cats combined with ARH's severe-duty catalytic converters. These systems improve performance yet significantly reduce the possibility of a check engine light. All ARH C7 kits are direct bolt ons; expect a quick and easy install with the included Grade 8 hardware, race-quality gaskets, and stainless steel band clamps (where applicable). They will surpass your expectations in quality and performance. Additional features of American Racing Headers C7 Corvette headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell metallic substrate catalytic converters for extreme durability * The only set of headers you'll ever need to buy * All American Racing Headers exhaust systems are for off-road use only

5.0 out of 5 stars ( 1 )

$2,735.91

—

$2,908.16

Borla ATAK Cat-Back Systems

Mount an offensive to regain optimum acoustics with Borla ATAK cat-back systems. Your modern muscle car will not only be performance-enhanced, but also acoustically tuned to a loud, aggressive exhaust note. ATAK (acoustically tuned applied kinetics) technology produces the highest dB levels, avoiding distortion to retain clarity. Tuned like a graphic equalizer, these cat-back systems are custom-tuned for your specific vehicle, delivering the most desirable sound to your ears. Plus, you retain all of the power-adding capabilities of Borla's multi-core design. The exhausts are handmade by master craftsmen from premium 300-Series austenitic stainless steel and ultra-smooth, mandrel-bent piping.

4.84 out of 5 stars ( 550 )

$2,014.99

—

$2,597.99

Borla ATAK Axle-Back Exhaust Systems

Installed behind the rear axle, Borla ATAK axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (rear section) performance exhausts are less restrictive than factory exhaust systems. Welded tips are standard on most systems. ATAK (Acoustically Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK-equipped exhaust systems deliver the highest available dB (decibel) levels in the Borla street-legal lineup. Unlike inferior brands that lose significant sound quality at higher volumes, ATAK systems are tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. They are calibrated on a vehicle-by-vehicle basis and their specifically-tuned internal muffler cores deliver the most desirable sound. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla ATAK axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla ATAK axle-back exhaust systems with the power of race-winning Borla Multicore technology.

4.61 out of 5 stars ( 158 )

$2,347.99

—

$3,199.99

Borla S-Type Cat-Back Exhaust Systems

Borla S-type cat-back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower and produce a more aggressive sound and higher flow. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-Series austenitic stainless steel, superior to T-400 Series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. It's just what you'd expect from the world's most experienced (and most winning) exhaust brand.

4.79 out of 5 stars ( 942 )

$2,097.99

—

$2,299.99

APR Cat-Back Exhaust Systems

APR cat-back exhaust systems personalize your vehicle's looks, sound, and performance. Beautifully hand-crafted T304 stainless steel components adorn the system, with stunning TIG welding throughout. The straight-though brushed finish mufflers smooth the exhaust note to a deep growl, without adding restrictions, while the Helmholz resonator reduces unwanted frequencies. Strong high-quality bracketry and OE-style clamps hold the system steadily in place, making the install or removal a snap—and fitment simple, yet precise. Additional details: * Low-profile design, suitable for lowered vehicles * Larger diameter piping and tips, compared to stock * No increase in weight, compared to stock * Limited lifetime warranty

Not Yet Reviewed

$2,766.95

—

$3,299.95

MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converters

MagnaFlow OEM Grade Federal/EPA Compliant direct-fit catalytic converters provide your vehicle with high-emission compliance, the latest technology, and premium-grade components. Along with those benefits, you also get their industry-leading warranties, so you can drive with confidence. MagnaFlow converters are designed to the exact original equipment specifications, while being engineered to keep the "Check Engine Light" off. Features include: * Stainless steel construction * CNC-precision robotic manufacturing * Meets or exceeds EPA emissions requirements * Hassle-free, OE-like fitment tailored to your specific application * Limited 5-year/50,000 mile warranty on construction * Limited 25,000 mile warranty on emissions

3.93 out of 5 stars ( 14 )

$2,076.00

—

$2,806.00

Corsa Sport Exhaust Systems

Corsa Sport exhaust systems employ a straight-through, non-restrictive design. They're coupled with their patented reflective sound cancellation science to tune out annoying low frequencies that cause droning and leave you with a crisp, clean sound. This cutting-edge innovation also reduces backpressure, allowing your engine to produce more horsepower and torque. The robust, aggressive-sounding Corsa Sport exhaust systems are manufactured from premium stainless steel, with mandrel bends and handcrafted tips polished to a gleaming brightness to enhance your ride's appearance. Developed to fit right every time, Corsa exhausts go on fast--no cutting or welding is necessary.

4.8 out of 5 stars ( 291 )

$2,080.99

—

$2,793.99

Borla S-Type Axle-Back Exhaust Systems

Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.

4.7 out of 5 stars ( 244 )

$2,279.99

—

$2,998.99

Corsa Xtreme Exhaust Systems

Thanks to their unique, unmatched muffler technology, the drone busters at Corsa Performance have created the ideal exhaust systems for you. Corsa Xtreme exhaust systems employ a straight-through, non-restrictive design. They're coupled with their patented reflective sound cancellation science to tune out annoying low frequencies that cause droning and leave you with a crisp, clean sound. This cutting-edge innovation also reduces backpressure, allowing your engine to produce more horsepower and torque. Corsa Xtreme exhaust systems are manufactured from premium stainless steel with mandrel bends and handcrafted tips polished to a gleaming brightness to enhance your ride's appearance. Developed to fit right, Corsa exhausts go on fast with no cutting or welding.

4.78 out of 5 stars ( 132 )

$2,007.08

—

$2,568.99

Stainless Works Performance Headers

Gain powerful sound, better performance, and improved mileage with a set of Stainless Works performance headers. Constructed from high-quality 304L stainless steel, the headers are CNC mandrel-bent and have durable 3/8 in. thick flanges. They're available to fit the factory connection point, or attach to a custom Stainless Works cat-back exhaust. Order the style you prefer and the model designed for your year/make and engine application.

4.53 out of 5 stars ( 32 )

$2,180.25

—

$2,845.25

Kooks Headers Header and Catted Connection Kits

Offering high performance exhaust for over 50 years, Kooks header and catted connection kits are designed for maximum power, built from T304 aircraft-quality stainless steel and race tested. Solely for competition purposes, they are offered for a full range a vehicle applications. Kooks header and catted connection kits package long tube headers and a catted X-pipe, H-pipe or Y-pipe.

1.0 out of 5 stars ( 1 )

$3,195.42

—

$3,416.10

On Sale

Dinan Free Flow Stainless Exhaust Systems

Dinan offers a wide range of exhaust upgrades for imports like BMW, Audi, and Volkswagen. Their free flow stainless exhaust systems are precision-engineered for optimum power gains—with a civilized, sporty exhaust note that's appropriately aggressive at wide-open throttle. Plus, there's no irritating low-rpm "drone" that is common with so many other aftermarket mufflers. These free flow systems are manufactured from stainless steel, inside and out, for maximum resistance to corrosion and reduced weight (by 30 percent). They utilize the OE brackets and hangers for mounting in factory-like fashion. Order the Dinan free flow stainless exhaust system designed for your vehicle application.

4.0 out of 5 stars ( 4 )

$2,254.95

—

$2,459.95

MagnaFlow Street Series Performance Exhaust Systems

MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.

4.4 out of 5 stars ( 616 )

$2,080.00

—

$2,400.00

On Sale

Flowmaster Outlaw Series Exhaust Systems

Flowmaster Outlaw Series exhaust systems are mandrel-bent for maximum performance and include specially designed mufflers. They deliver bold, dynamic interior and exterior tones for enthusiasts who covet the most aggressive components available. These systems include hardware and tips, where applicable--so installation is quick and easy. The kits are available in dozens of configurations for fitment on specific vehicles, including standard, crew, extended, and extended crew truck cabs; and long or short bed lengths. Order the Flowmaster Outlaw model designed for your application.

4.57 out of 5 stars ( 276 )

$2,151.95

Veer Performance High-Flow Catalyst Down Pipes

With Veer Performance you no longer must choose between emissions compliance and maximum power. Veer's high-flow catalyst down pipes are constructed with their EPA-compliant catalysts installed to mandrel bent 304 stainless steel tubes that feature true OEM fitment with a 20 percent improvement in power and efficiency. Veer exhausts support more than 1,300 hp and can make more horsepower and torque than catalyst deletes (straight pipes). You don't have to choose between high performance or environmentally friendly, simply choose Veer Performance high-flow catalyst down pipes and you can be environmentally fast! Choose the catalyst down pipes designed for your vehicle. This catalytic equipped downpipe is EPA compliant for Street and Off Highway use (per the Manufacturer's application listing). The manufacturer has Reasonable Basis (Prior Testing) and Belief that this product allows the vehicle to operate within the legal emissions standards in states that accept the legal provisions of the Clean Air Act and EPA Memorandum 1A and has an EPA Manufacturers Code (GBL). This catalytic equipped downpipe is EPA compliant for Street and Off Highway use (per the Manufacturer's application listing). The manufacturer has Reasonable Basis (Prior Testing) and Belief that this product allows the vehicle to operate within the legal emissions standards in states that accept the legal provisions of the Clean Air Act and EPA Memorandum 1A and has an EPA Manufacturers Code (GBL). This catalytic equipped downpipe is EPA compliant for Street and Off Highway use (per the Manufacturer's application listing). The manufacturer has Reasonable Basis (Prior Testing) and Belief that this product allows the vehicle to operate within the legal emissions standards in states that accept the legal provisions of the Clean Air Act and EPA Memorandum 1A and has an EPA Manufacturers Code (GBL). Material features: * Metallic substrate 400 cell catalysts * 304 stainless steel construction * Critical connections are TIG welded and back purged

Not Yet Reviewed

$2,565.00

AWE Tuning Track Edition Exhaust Systems

If raw and rowdy are your speed, AWE Tuning Track Edition exhaust systems will satisfy your desires. These aggressive sounding systems are offered in handcrafted and CNC mandrel-bent T304L stainless steel cat-back and cost-effective axle-back options. Each system is completed with adjustable tips (allows depth into the bumper to be set according to personal taste) in chrome or diamond black. AWE Tuning Track Edition exhaust systems are not for the faint of heart and cannot be returned due to sound preference. Choose your AWE Track exhaust wisely!

5.0 out of 5 stars ( 2 )

$2,375.00

AWE Tuning Touring Edition Exhaust Systems

AWE Tuning Touring Edition exhaust systems deliver a bolt-on design with AWE's proprietary straight-through drone-canceling solution--180 Technology that cancels out problematic frequencies, leaving only unlocked performance and AWE's signature note. These sophisticated, more civilized exhausts are handcrafted and CNC mandrel-bent from T304L stainless steel, finished with tips in chrome silver or diamond black, and offer premium performance for a variety of vehicles—domestic and import. Order the preferred exhaust designed for your vehicle.

4.38 out of 5 stars ( 8 )

$2,270.00

American Racing Headers Late Model Ford Mustang Headers

American Racing Headers late model Ford Mustang headers are available for a wide variety of Mustang engines and models; every set provides a serious bump in horsepower and torque. Select headers come with an X-pipe standard, if you prefer a more classic muscle-car sound, swap the X-pipe for an optional H-pipe. Either choice provides a low-rasp, drone-free driving experience. ARH Direct Connect kits for Mustangs are designed to work with original equipment cat-back systems without any cutting or welding. For Corsa cat-back exhaust systems, check out ARH's Direct Connect kit specifically made to work with Corsa cat-backs. ARH Mustang headers with Bottleneck Eliminator kits do away with the 2.25 in. restriction at the cat-back connection point of some OE 5.0L systems. They are specially built to fit aftermarket cat-back systems; a simple mark and cut (no welding required) mates the ARH Bottleneck Eliminator to your cat-back. ARH long system headers for 2012-14 Boss Mustangs even allow you to keep the Boss side pipes. Additional features of American Racing Headers late model Ford Mustang headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell, metallic substrate catalytic converters for extreme durability * The only headers you should ever need to buy * All American Racing Headers exhaust systems are for off-road use only

Not Yet Reviewed

$2,139.72

Kooks Headers Long Tube Headers

Kooks Headers long tube headers are heavy-duty and crack-resistant, featuring large diameter stainless steel construction (most applications) with smooth-flowing mandrel-bent tubing. They include gaskets, bolts, and oxygen sensor extensions where required. Also available as kits with connection pipes, depending on the application, Kooks long tube header kits include individual connection pipes, a Y-pipe, X-pipe, or H-pipe to connect to the exhaust system. X-pipes are used primarily for high-rpm performance and race applications. H-pipes create lower end power and are used on street cars for increased performance with a comfortable sound level. These connection pipes are offered in three versions: * Off-road (non-catted) for full track use with no horsepower loss and the loudest exhaust tone * With high-flow catalytic converters; recommended for street driving with little or no horsepower loss and a deeper exhaust tone * With Kooks ultra-high performance GREENCATS catalytic converters; designed for naturally aspirated and forced induction engines up to 900 hp, eliminates most "Check Engine Light" warnings Note: Kooks Headers long tube headers and connection pipes may not be legal for sale, installation, or use in some areas. Check your state and local laws.

4.57 out of 5 stars ( 28 )

$2,757.30

Corsa dB Cat-Back Exhaust Systems

Corsa dB cat-back exhaust systems allow you to enjoy the look and big sound of your beast even more. Each system offers a computerized, mandrel-bent, straight-through design that maximizes airflow to deliver great sound without annoying noises in the cabin of your truck. Plus, Corsa Performance adds a large, polished, 12 in. stainless steel tip to ensure that your truck looks as good as it sounds--from any angle! Utilizing the most advanced manufacturing methods, every part of these dB cat-back systems is made with a true focus on you, the driver, to enhance your driving experience. Their bolt-on installation makes your job quick and easy. You'll experience improved fuel economy and performance along with the deep, aggressive rumble that makes your truck sound like it should. Experience the power of a dB cat-back exhaust system created specifically for your truck by Corsa.

4.48 out of 5 stars ( 73 )

$3,599.99

MagnaFlow California Grade CARB Compliant Direct-Fit Manifold Catalytic Converters

MagnaFlow California Grade CARB Compliant direct-fit manifold catalytic converters comply with California Air Resources Board (CARB) emissions regulations, which require more precious metals and rigorous testing, plus the direct-fit means an easier bolt-on install for you. Features include: * Stainless steel construction * CNC-precision robotic manufacturing * Limited 5-year/50,000 mile warranty

2.5 out of 5 stars ( 2 )

$2,065.00

—

$2,943.00

Stainless Works CNC Mandrel-Bent Exhaust Systems

Stainless Works CNC mandrel-bent exhaust systems are the simply the best for improving your vehicle's performance, sound, and mileage. Made of high-grade 304 stainless steel, they offer an array of options to unleash more torque and horsepower while delivering the sound your vehicle has been lacking. Most are designed to use factory hangers. Stainless Works not only offers their Factory Connect option that mates to a factory connection point, but also Performance Connect options for many models. Performance Connect gains more performance than factory connection points allow, and they require the installation of Stainless Works headers (sold separately) to gain the full performance benefit. Stainless Works also builds their mufflers entirely of stainless steel. They will never "burn in," "blow out," or change their tone—ever. Choose from a selection of universal or application-specific muffler designs, including turbo chambered (loud), chambered round (louder—can be reversed for an even more aggressive sound), and turbo S-tube (loudest—may be too aggressive for a daily driver). Additional features of Stainless Works CNC mandrel-bent exhaust systems include: * 304 stainless will never red-rust like cheaper 409 stainless * TIG-welded for strength * Durable 3/8 in. thick flanges * Mandrel-bent (no buckling) for optimal flow * Variety of tip options (varies by application) * Truck exhausts available with three exit locations: behind the passenger tire; under the rear bumper (one on each side); and in front of the passenger tire * Install-Ready; all systems come with all necessary parts to make installation as smooth as possible

3.87 out of 5 stars ( 31 )

$2,085.25

—

$2,370.25

Valvetronic Designs Valved Sport Exhaust Systems

Valvetronic Designs offers Valved Sport exhaust systems for a wide range of BMWs from 2012 and up. This newest revision of the F chassis valved exhaust setup offers delivers improvements to aid in the ultimate sound experience. Utilizing new manufacturing techniques, these systems are truly a cut above the rest and are engineered to last. Built entirely by hand at the Valvetronic facility in Chambersburg, PA, the V2 F chassis exhaust features a new valve design to ensure optimal operation for the life of your system. In addition, hangers have been relocated and muffler internals revised to provide a more docile and refined experience when the valves are closed. Lastly, a new cast Y-pipe design helps aid in the goal of maximum exhaust flow and the most sonorous sound experience Sound Dynamics: The F chassis exhaust gives a very unique sound experience to the BMW F chassis platform. Allowing to instantaneously go from loud to the quiet mode when the system is operating with the valve opened, you get a very raw and deep sound characteristic. When closed the system retains stock-like sound levels. When operating with a valve opened you get very loud and aggressive pops and snaps on the overrun aggressive gear change sound—and overall, a raw engaging sound experience unparalleled by any other system on the market. The F chassis exhaust was designed from the ground up to be an uncompromising sound experience regardless of your situation. There is nothing else quite like it on the market. Features of the Valved Sport exhaust system: * Fully mandrel-bent for maximum flow * Precision TIG welds for high strength * Built from brushed T304 stainless steel * Sleeve-style exhaust tips for that perfect look * Electronic valves (rapid open and close function) * Exhaust valve integration into factory dynamic drive modes * Extension harness included, plugging factory exhaust valve controller in

Not Yet Reviewed

$2,499.00

—

$4,999.00

Kooks Headers Exhaust Systems

Kooks Headers offers a variety of exhaust systems designed for specific vehicles. They feature large diameter 304 stainless steel construction with smooth-flowing mandrel-bent tubing for maximum exhaust flow. Among the options are street and OEM-style replacements, or high-rpm performance and race applications. Choose from styles such as header-back, cat-back, rear axle-back, and full-length. Look over the available options and select the model designed for your vehicle. Depending on the system you order, specs/configurations may include: * One or two mufflers, or a muffler-delete system * Muffler style: wrapped perforated core, turbo, perforated tube, glasspack * Components with a natural or polished finish * Single or dual inlet/outlet * Catalytic converter (where applicable) * Intermediate pipe (where applicable) * Tailpipe; different diameters available * Round tip(s), polished or black coated, various styles Some Kooks Headers exhaust systems are offered in one of three versions: * Off-road (non-catted) for full track use with no horsepower loss and the loudest exhaust tone * With high-flow catalytic converters; recommended for street driving with little or no horsepower loss and a deeper exhaust tone * With Kooks ultra-high performance GREENCATS catalytic converters that eliminate 90 percent of "Check Engine Light" warnings; designed for naturally aspirated and forced induction engines up to 900 hp Note: Certain exhaust systems may not be legal for sale, installation, or use in certain locales. Check your state and local laws.

4.75 out of 5 stars ( 8 )

$2,410.57