Availability
Showing In Stock Items. Show All 39 Items.
The legacy continues … and now it is bigger, better, and faster! Built for enthusiasts and professionals, MPV13 is the fastest most sophisticated OBDII interface device to date, and Pro is the new standard. Take advantage of Pro Feature Set capabilities, like standalone data logging and PROLINK+ compatibility (sold separately) already built in. MPVI3 redefines the limits of speed and control with faster standalone data logging and two times the storage capacity compared to the previous generation. Log more runs (faster) and store more calibrations on your MPVI3, all with the convenience of eliminating your laptop from the equation. HP Tuners VCM Suite MPVI3 Credit Pro packages equip you with the most inclusive scanning, logging, and calibration, making them the only tool you need in your toolbox. The MPVI3 connects your vehicle's control modules to HP Tuners' VCM Suite software. You can run complete diagnostics, monitor vehicle performance, read from various vehicle control modules, and more in VCM Suite. Optimize your performance, fuel economy, or whatever your vehicle goals may be in VCM Editor with a multitude of defined parameters. When you are ready, license and tune any vehicle currently supported by HP Tuners with the fastest read and write speeds available. Connect, read, edit, write, drive; HP Tuners VCM Suite MPVI3 Credit Pro packages are offered with or without tuning credits.
( 52 )
$599.95
—
$799.91
On Sale
Replace your stock exhaust with one of these free-flowing exhaust systems from Summit Racing™. They're designed to clear trailer hitches and spare tires, unless otherwise noted. Our cat-back systems feature mandrel-bent aluminized tubing, single or dual outlets, turbo, chambered or glasspack mufflers, and all hardware needed for the installation. Nearly a hundred kits are available; order the model recommended for fitment on your vehicle.
( 848 )
$546.99
XS Power Titan8 lithium batteries are designed for peak power. This Lithium Titanate Oxide (LTO) Series uses a very high-power lithium cell that is designed for very high-burst output (up to 100 times its capacity) as well as very high-charge current (30 to 60 times its capacity). This translates to a single 10Ah module that can support burst current up to 1,000 amps and can accept 300 amps of continuous charge current. The built in 2/0 bussing allows up to four positive and four negative hidden direct connections to each module without the need for any external exposed bussing, while still leaving two easily accessible top terminals and four series or parallel expansion terminals to easily build a bank of nearly any configuration from 12 V, 24 V, 36 V, or any configuration imaginable. Each module comes standard with a built-in balancing system and can be upgraded to include Bluetooth connectivity that allows remote cell monitoring, internal temperature sensing, battery health monitoring, and can be configured to send notifications to any tablet or smartphone when any user preset limit is met, including low voltage, over temperature, overcharge, etc. XS Power Titan8 lithium batteries are also offered in BCI direct fit models that are fully insulated with temperature monitoring built in that are suitable for use in the factory under hood position.
( 3 )
$599.99
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. Cardone remanufactured rack and pinion units feature all new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance. The racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life. All new O-rings and lip seals ensure no leaking and long-lasting performance. and all units are 100 percent computerized hydraulic tested for proper flow, leakage, and performance.
( 84 )
$702.99
Put your air suspension together your way with some help from Firestone. These heavy duty air compressors are ideal for custom systems.
( 8 )
$589.81
SPEC Stage 2 clutch kits are designed for street, drag race, pulling, and autocross use. They feature segmented or full-faced Kevlar® discs with steel backings. These linings deliver excellent drivability like SPEC Stage 1 clutches, but with slightly longer life and higher torque capacity. The hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Nearly a thousand models are available; order the kits recommended for your vehicle. Additional features of SPEC Stage 1 clutch kits: * High-clamp pressure plate * Pure Kevlar® friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included (where applicable)
( 17 )
$764.10
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. PowerStop's Z23 Evolution Sport brake upgrade kits with calipers comes with everything you need--pads, rotors, calipers, and premium stainless steel hardware for an easy, bolt-on upgrade for your daily driver. Along with increased braking power, the carbon fiber ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with drilled, slotted, and zinc plated rotors to ensure a cool, smooth ride that protects against rust and corrosion, while the powdercoated calipers not only protect against corrosion, but also stand out behind your wheels. Give your daily driver the easy and affordable performance upgrade it deserves--PowerStop Z23 Evolution Sport caliper brake kits.
( 230 )
$601.99
Clearance
Pure Energy remanufactured turbochargers are built to the strictest quality standards, implementing design enhancements that improve durability, efficiency, and power. These stringent testing and evaluation processes assure proper performance and reliability standards are met. Pure Energy turbochargers are supported by a free tech support hotline, staffed by ASE certified master technicians with access to extensive vehicle-specific repair data. Quality enhancements include: * Precise dual plane balancing of turbine shaft and compressor wheel eliminates high-speed vibrations, premature shaft and bushing/bearing failures, and assures quick spool up * New OEM design or upgraded CHRA (Center Housing Rotating Assembly) internal components assure reliability and durability * Thrust plates, seating rings, and journal bearings are strategically designed to withstand internal oil pressure and improve lubrication * Electronic and pneumatic actuator function is tested, calibrated, and adjusted for proper pressure relief and boost functions * Mechanical fastener and tolerance verification—all critical points are measured, gauges, torques, and witness marked * Assembly line and end-of-line testing--multi-computer and mechanical test operations monitor the turbo performance
Not Yet Reviewed
$1,144.99
$599.50
Summit Bucks
Delphi fuel pump module assemblies are nickel plated with all-steel internal components. They feature internal guide rod springs and external rubber feet for enhanced stability and reduced noise from vibration. These fuel pumps have little flow or pressure variation in hot fuel situations. Delphi fuel pump modules are designed to be OE replacements.
( 250 )
$621.99
—
$724.99
If you're in search of quality OE replacement hoods for your restoration project, check out Body Parts reproduction hoods. Made from quality materials, each application is based on the manufacturer's factory designs to provide accurate fit, form, and function.
( 77 )
$515.99
Catco prides itself on leading the industry in new product development and efficient manufacturing processes for its EPA- and CARB-compliant catalytic converters. Aristo's proprietary substrate chemistry yields highly efficient loadings for lower cost and better converter efficiency while Catco's latest advanced-manufacturing technology ensures that all converters are built to exact OE dimensions and fitment. All this allows Catco to maintain industry-leading efficiency, productivity, and competitive pricing. Catco Federal/EPA direct-fit catalytic converters feature: * 409 stainless steel shell and neck construction for longer life * Aristo Clean by Design advanced catalyst technology to handle the toughest emissions problems * Increased precious metals loadings * Improved O2 storage and release * Exact O2 sensor location(s) * Lower emissions output * Long-term reliability * Keeps the MIL light off * Hardware included (where needed) * Provides for faster and easier installations * 5-year/50,000-mile warranty on converter body * 25,000-mile warranty on emissions
( 7 )
$737.99
AP Exhaust direct-fit catalytic converters will render your vehicle energy efficient and environmentally friendly. They're built with 409 stainless steel shell and neck construction for longer life, and feature AP's "Clean by Design" premium-grade ceramic substrates for maximum pollution reduction. Offering the most comprehensive coverage, they can provide direct-fit catalytic converters with lower emissions, long-term reliability, and an easier install. The growing concern for the environment means there is a growing need for quality emission control products. AP Exhaust direct-fit catalytic converters offer the quality, fit, and value to meet those concerns. Order the model designed for your vehicle application.
( 29 )
$646.99
Four Seasons air conditioning compressors are made using state-of-the-art technology and quality assurance processes. Their compressors are carefully assembled and then undergo a battery of stringent quality tests, including noise, function, leak, and pressure testing. You can feel confident that you're purchasing a high-quality product from Four Seasons.
( 164 )
$559.99
Nitrous Express Mopar plate nitrous systems feature Phase 3 Spraybarless technology for the ultimate in atomization and distribution. Their plate bolts right between the throttle body and the intake, making installation a breeze. They include Lightning series nitrous and fuel solenoids, as well as a wide-open throttle switch so that the nitrous only activates at wide-open throttle and automatically turns off when you let your foot off the gas. These systems also include jetting from 35 to 150 hp and can be upgraded to 250 hp with additional jets. A 10 lb. bottle, braided stainless lines, stainless bottle brackets, and an arming switch, as well as every nut, bolt, and electrical connector needed also come with the kits to give you everything you need for a complete installation.
( 2 )
$781.77
Carter OE replacement electric fuel pumps are manufactured in a plant that is TS16949 certified and provides the absolute latest in OE-quality certifications. This dedication to excellence, combined with in-depth OE experience, results in products that provide dependable performance that meet or exceed expectations. Carter OE replacement electric fuel pumps feature: * Factory-specified pressure and flow * OE-matched electrical connections * Accurate diameter and length * Original inlet and outlet positions * 100 percent factory-tested reliability * Roller vanes, which are more contaminant-tolerant than other designs * Carbide and brass bearings instead of plastic for longer life and smoother operation
( 181 )
$645.99
Walker direct-fit catalytic converters outflow stock converters, and also include these features: Aluminized steel heat shields (many have dual shields), 409 stainless steel shells, 16-gauge stainless steel pipes and nipples, and a heat-resistant sealed mat. The materials and construction contribute to a long life and better performance. Walker units are direct replacements for OE converters and will install with little or no modification. Some converters have steel air tubes with perforated holes to help distribute the airflow evenly, without robbing power. New flanges are included when necessary. Hundreds of models and configurations are available for fitment on specific vehicle applications.
( 32 )
$554.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
