Availability
Showing In Stock Items. Show All 17 Items.
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 107 )
$949.95
—
$2,249.95
$712.95
—
$1,237.95
On Sale
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$142.95
—
$287.95
$92.95
—
$259.15
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$625.95
—
$1,049.95
$562.95
—
$943.95
On Sale
These automatic transmission oil pans from Mr. Gasket are stock-depth chrome plated pans. They come complete with a washer and gasket and most have drain plugs.
( 91 )
$72.55
—
$126.95
$65.25
—
$114.25
On Sale
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$749.95
—
$999.95
$673.95
—
$898.95
On Sale
B&M automatic transmission deep pans provide additional fluid capacity and cooling ability. No modifications to the dipstick are needed. They include a drain plug for clean and easy fluid changes, and are available in chrome or cast aluminum. Filter extensions are included for those applications that require the filter to be moved closer to the bottom of the pan.
( 372 )
$384.95
—
$549.95
$346.45
—
$493.95
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 38 )
$378.95
—
$573.95
$315.95
—
$515.95
On Sale
B&M flexplates are tough enough to handle severe applications and are ideal for 6,000+ rpm usage. They have precision-stamped centers and a rust-resistant, gold iridited finish. Some units are SFI-approved and are NHRA/IHRA-legal for all classes.
( 177 )
$177.95
$160.15
On Sale
Hooker Blackheart engine mount hardware kits include high-grade zinc coated bolts to complete the installation accurately. Order the fasteners recommended for your engine application.
( 4 )
$20.44
$18.40
On Sale
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$1,599.95
—
$1,649.95
$1,438.95
—
$1,483.95
On Sale
Replacing older OE converters can be a challenge, often compelling customers to settle for makeshift solutions. You can remedy such an issue by choosing a LuK Clutch TorCon torque converter to restore smooth shifting to your automatic transmission. LuK's selection of converters provide the correct fit and function, covering a wide range of vehicles, assuring you will be able to find the proper unit for your vehicle.
( 2 )
$349.99
—
$1,245.99
$314.99
—
$1,121.39
On Sale
QuickTime offers bellhousing accessories, including these dowel pins, to help you to complete your project. They're made from quality material and are designed to correct the improper register bore alignment of bellhousing to your engine crankshaft center line.
( 4 )
$83.35
$45.84
On Sale
Holley LS clutch installation kits include all the hardware and components needed for a complete clutch install on a 6-bolt crank LS engine using a T-56 transmission. A 12 in. organic disc with a 6-spring helix sprung hub provides the superior grip needed for the strip, while the matched diaphragm-style pressure plate provides a pedal feel comfortable enough for the street. This provides 30 percent more clamping pressure and transmits that through a billet steel flywheel. Features: * 12 in. organic single disc clutch with 1 1/8 in. 26-spline hub for LS engines with 6-bolt crankshaft * 6-bolt billet steel flywheel provides strength and a fresh, new foundation for the clutch * Street/Strip clutch kit provides excellent holding strength with a smooth daily driver pedal feel * Designed for power levels up to 550 hp naturally aspirated Please note: Hydraulic release bearing to transmission bolts are not included.
Not Yet Reviewed
$1,249.95
$812.95
On Sale
Hays billet aluminum flywheels are popular with many road racers and serious drag racers--shouldn't you have one? They are manufactured from certified billet material to handle the stress of high rpm and the severe punishment of racing. Upgrade to a precision-machined and engineered Hays billet aluminum flywheel. Features include: * SFI-approved--legal for use in racing classes that require SFI certification * Forged from 7075 T-6 or 6061 T-6 alloy for weight reduction and excellent heat dissipation * Forged, heat-treated steel ring gears and replaceable 1045 steel friction surfaces attached with high-grade fasteners * CAD-designed for optimum performance and reliability * Offered in internal, external, or neutral (zero) balanced versions * Available for a wide variety of engines Note: When choosing a flywheel, remember that a heavier flywheel stores more energy. A heavy car requires more power (or inertia) to launch without bogging the engine and needs a heavier flywheel. Lighter flywheels create less inertia at launch but will accelerate faster through the gears.
Not Yet Reviewed
$527.95
$290.95
On Sale
Lakewood bellhousing bolts are for bellhousing to engine block and trans to bell attachment. These threaded hex head bolts are built from high-strength chromoly steel, and then black oxide coated for a tough, long-lasting finish.
( 4 )
$49.95
—
$52.95
$27.47
—
$29.12
On Sale
The MSD Pro-Billet multi-channel total loss flywheels ramp up performance in a way that has to be felt to be believed. This flywheel is half the weight of the stock unit but is CNC-machined from 7075-T6 aluminum, providing absolute accuracy and incredible strength without all of the weight. The reduction in weight produces quick throttle response while putting less stress on other engine components. Maximize your performance by minimizing weight with MSD Pro-Billet multi-channel total loss flywheels.
Not Yet Reviewed
$949.95
$617.95
On Sale
These QuickTime flexplates have been designed and engineered to fit your OEM transmission without any modifications. They are made from durable H70 grade steel and are double welded/TIG welded for durability. These QuickTime flexplates are also zinc plated for long lasting finish.
( 6 )
$512.95
$282.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
