Availability
Showing In Stock Items. Show All 479 Items.
ACDelco offers rear main seal housings for a wide range of year/make and engine applications. The one-piece aluminum replacements are designed, engineered, tested, and backed by General Motors. They are validated OE parts for specific Chevrolet, Buick, GMC, and Cadillac vehicles. These components are designed to give the engine oil leak protection from between the crankshaft output flange and the engine block. Order the engine crankshaft seal housing recommended for your ride.
( 8 )
$66.99
ACDelco replacement fuel injectors help you to get maximum fuel efficiency and power from your engine. Properly operating fuel injectors are essential components for helping your vehicle run flawlessly. Replace any worn or faulty fuel injector with an OE-style model designed for your specific vehicle.
( 37 )
$69.99
—
$76.99
Give your ride an attitude adjustment with ACDelco crankshaft position sensors. Your original sensor can become worn or burnt and sensitive to hot engine temperatures, leaving you sitting on the side of the road. ACDelco offers high-quality, direct-fit replacement crankshaft position sensors to respond to your car's needs. Dozens of models are available for fitment on thousands of vehicles from the 1980s and up. Enhance the efficiency and performance of your ride; order the crankshaft position sensor recommended for your application.
( 10 )
$59.99
Chevrolet Performance composition head gaskets are recommended for stock and mildly modified engines. They're available in a variety of bores, compressed thicknesses, and volumes for fitment on specific vehicle and engine applications.
( 121 )
$84.99
—
$99.99
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 28 )
$73.99
ACDelco GM Genuine Parts oil pan gaskets are genuine parts that will provide the same performance, durability, and service life as the factory originals. Choosing the best quality to maintain your GM vehicle is easy--ACDelco GM Genuine Parts has the right fit, function, and form for confident, hassle-free service.
( 5 )
$51.99
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 319 )
$68.99
—
$92.99
Hayden Rapid-Cool transmission oil coolers take the heat, so your vehicle won't! Over 14-million transmissions fail every year, and 9 out of 10 are from overheating. Rapid-Cool's unique plate and fin design combines cooling expertise and space efficiency; multiple sizes are available. Their patented internal turbulation provides better heat transfer. Lower your operating temps with a pioneer in cooling: Hayden!
( 162 )
$52.99
—
$61.99
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Z26 Street Warrior carbon-fiber ceramic brake pads are designed as an upgrade over stock brakes to reduce brake dust and eliminate noise on muscle cars and performance vehicles. These brake pads are made with a low-dust ceramic formula, infused with carbon fiber, to strengthen the compound and provide the extreme stopping power your vehicle deserves. Premium stainless steel hardware, along with ceramic brake lubricant, is included with the Z26 brake pads making it easier to complete your brake job.
( 276 )
$65.09
—
$86.08
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 19 )
$54.99
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 36 )
$60.99
—
$75.99
ACDelco GM Genuine Parts mass airflow sensors are a key part of the engine management system, and they are GM-recommended replacements for your vehicle's original component. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. These original equipment mass air flow sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 24 )
$73.99
—
$79.99
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 555 )
$87.95
—
$96.54
These Sealed Power MA Series main bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank whose surface hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better control of wall variance. It also helps to minimize debris embedding, which can score the crank's surface.
( 76 )
$94.99
Use Dorman engine rear main seal covers to ensure the proper sealing of your engine, to stop and/or prevent engine oil leakage. They are made from high-quality materials and are available as direct replacements for a proper fit on various makes and models. Whatever your repair needs, Dorman has just what you're after!
( 10 )
$53.95
With Summit Racing™ branded, all-100 percent silicone 8mm constructed wire, a 300 ohm per foot wire-wound EMI suppression core, high-heat silicone boots, and stainless steel and brass terminals, you get all the high-end features a wire set can offer, without breaking the bank! * Dual silicone high tear-resistant jacketing with fiberglass matting gives you the highest heat protection and superior terminal pull-off values in the business * Our 300 ohm per foot wire-wound magnetic suppression core maximizes the voltage output of your ignition system, while maintaining high EMI resistance values * Stainless steel terminals with posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery * Ultra-high heat silicone spark plug boots provide superior radiant heat protection -- High dielectric strength properties virtually eliminate voltage leakage and blow through Installing our Summit Racing™ high-end 8mm sets will give you the confidence, reliability, and performance you expect from Summit Racing™ products.
( 1018 )
$55.99
—
$57.99
Replace your timing chain with a new one from Chevrolet Performance. Designed specifically for your engine, many applications are available.
( 1 )
$74.99
Mahle Original offers a choice of cylinder head gaskets to fit your project with the most effective, leak-free seal. Because vehicles and performance levels are as different as the people who drive them, a head gasket that works for you may not work for another. Mahle Original knows this. Their list of head gasket materials includes multi-layered steel, Solicor, VR-2000, Nitroseal, and VR500. Each does their job differently, but you can rest assured that the sealing job they do will be effective and efficient. Positive sealing is available with Mahle Original cylinder head gaskets. Order the style designed for fitment with your vehicle and engine application.
( 45 )
$77.99
—
$81.99
Chevrolet Performance engine coolant crossover pipes are designed to vent the coolant to ensure that the coolant reaches the highest point on the cylinder heads and doesn't get blocked by an air pocket. They are manufactured from quality materials and install in the stock location for a direct fit.
( 6 )
$59.99
No leaks, no problems! Mahle Original timing cover gaskets deliver a perfect fit for a wide range of auto, truck, van, and SUV applications. They're available in a variety of materials and configurations for specific vehicles. The gaskets feature an OE design that meets or exceeds factory specs—and are offered individually or in timing cover seal kits.
( 18 )
$61.99
Dayco standard heater hoses carry the heated coolant from the engine block to the heater core under the dashboard, and return it to the engine. They're made for general service on light trucks and passenger cars. The ultra-durable hoses are constructed using all EPDM compounds, with spiral reinforcement for high burst strength and heat resistance of -40 degrees F (-40 degrees C) to +257 degrees F (+125 degrees C). These black cover hoses are similar to the SAE 20R3, Class D-2, and are specifically designed to be compatible with all common coolants and coolant additives. However, they are not suitable for fuel or oil transfer. Dayco heater hoses are available in a variety of diameters and lengths.
( 43 )
$52.99
On Sale
Mr. Gasket offers replacement water necks in a variety of styles, materials, finishes, sizes, and angles. Water necks help to hold the vehicle's thermostat in place as it opens and closes—to regulate the flow of coolant through your engine. The opening in the water neck created by the thermostat allows coolant to flow from the radiator back to the engine. Order the model recommended for your vehicle.
( 117 )
$51.19
—
$64.65
ARP studs are professional-quality fasteners for your wheels. They are manufactured from premium-grade, heat-treated 8740 chromoly steel, nominally rated at 190,000 psi tensile strength, and cadmium plated for extra durability. Styles and sizes are available to fit all popular applications; plus, they can easily handle the tremendous acceleration shock loads and lateral forces found in racing applications. ARP wheels studs are must-have replacements for competition vehicles.
( 533 )
$62.99
—
$64.99
Summit Racing™ OEM LS valve covers make a great choice to service and maintain your vehicle's LS engine. They are made from premium materials to OEM specifications for proper fit and performance, as well as good looks under the hood. Choose the replacement valve covers for your application.
( 8 )
$57.99
—
$76.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
