Availability
Showing In Stock Items. Show All 21 Items.
These Chevrolet Performance exhaust manifold gaskets will provide a leak-free seal when installing your exhaust manifolds. Chevrolet Performance exhaust manifold gaskets are made of high-grade materials to reduce the chance of a blowout under high exhaust temperatures or pressure. Choose these Chevrolet Performance exhaust manifold gaskets to get the job done right the first time.
( 8 )
$56.99
When installing new headers or putting your headers back on, you'll need some good gaskets. Ford Performance Parts replacement header gaskets are made to stock specifications and tolerances, so you're sure to get a good seal.
( 4 )
$84.99
Mr. Gasket MLS (multi-layered steel) header gaskets are designed for extreme cylinder pressures produced by high horsepower, high compression, turbo-charged, supercharged and nitrous equipped engines. MLS header gaskets are manufactured from three stainless steel layers that resist corrosion, will not burn through or push out, and maintain maximum fastener torque retention. Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal excessive exhaust pressure produced from cylinder heads.
( 14 )
$56.69
Typical aftermarket exhaust manifold bolts are much shorter than stock which after numerous heat cycles can cause them to fatigue and start to stretch, leading to exhaust leaks and possible breakage after repeated re-torques. The finish and coating on most of these bolts can also lead to premature corrosion and zinc embrittlement. Replace damaged or corroded exhaust manifold bolts with BD Diesel class 10.9 bolts and spacers which improve thermal durability to stand up to the heat and non-Zinc plated fasteners prevent zinc embrittlement. Order the kit recommended for your vehicle and engine application. BD Diesel exhaust manifold bolt and spacer kit #1041483 details: * Exhaust spacers ensure fastener operates in elastic stretch without fracture or permanent yield * Class 10.9 hardware * Non-zinc plated fasteners prevent zinc embrittlement * Includes 16 exhaust spacers (18mm) * Includes 16 flange head exhaust bolts (M8x1.25 – 40mm 10.9)
Not Yet Reviewed
$93.95
Cometic Gasket's commitment to cutting-edge technology has produced superior-quality gaskets like these Cometic MLS exhaust gaskets. They are constructed from multiple layers of strong stainless steel that has excellent rebound ability and corrosion-resistant characteristics. Outer layers are coated with a heat-resistant, rubber-based material to create a seal that can withstand a variety of sealing and load conditions and surfaces. Cometic MLS exhaust gaskets are ideal for all types of head and block material and their design promotes an even torque load across the sealing surface, allowing for measurably reduced bore distortion.
( 31 )
$52.49
BD Diesel exhaust manifold gaskets will provide a leak-free seal to get rid of pesky exhaust leaks. They are made of a special composite material that will ensure that there will be no leaks. The gaskets are designed to fit BD Diesel exhaust manifolds without any modifications.
( 3 )
$93.95
Engines often suffer from exhaust hardware failure due to rust, corrosion, and fatigue from thermal cycling. Dorman exhaust manifold gasket and hardware kits offer a convenient way to service the manifold with the replacement components needed for a complete repair. This all-in-one solution is designed to preserve and restore the proper function of the original equipment exhaust manifolds. The kits include exhaust manifold gaskets, flange gaskets and mounting hardware.
( 1 )
$94.99
Flatout offers a comprehensive line of performance gaskets, including header gaskets, which are engineered from top-grade materials to take on high-heat produced by your exhaust headers. Their high thermal conductivity pulls heat away from the heat source and allows them to expand and contract without damage. Flatout header gaskets feature smooth contours, accurate hole locations, and tight tolerances to provide an exceptional fit and seal. Get the most performance out of your engine, use Flatout header gaskets--they seal where others don't!
( 10 )
$50.99
—
$61.99
Fatout Armored RCC (rubber coated copper) header gaskets features a rubber coating that is inert to almost all fluids and solvents and can withstand the extreme temperatures produced by the hottest drag motors. The dry coating is very thin to ensure low torque loss and is durable enough to be reused in most cases.
( 13 )
$61.99
Leaks in the exhaust manifold produce bad exhaust valves, a loss of power, and increased fuel consumption. Mahle Original exhaust gaskets require metal beads where the gas passes through at very high temperatures and low pressure. These metal beads are reinforced with metal sheets to resist the component movement that arises from large fluctuations in temperature.
( 14 )
$56.99
—
$102.99
Cometic Gasket exhaust gaskets deliver performance. Whether you are looking for OE replacements or the higher performance of spiral-wound stainless steel or graphite, Cometic has exhaust gaskets to seal your motorcycle.
( 1 )
$53.48
—
$98.63
Clean, flat surfaces are essential to a good seal. However, that type is surface is rarely available. The best way to seal a warped or uneven exhaust is with SCE Pro Copper embossed exhaust gaskets. These replacements feature an embossed O-ring around the exhaust port to increase sealing pressure for tight, leak-proof performance, even on imperfect surfaces. Whether your ride is a motor home or hot rod, or is used for towing or racing, you'll appreciate the trouble-free seal of SCE Pro Copper embossed exhaust gaskets, available for a wide range of port styles and sizes.
( 103 )
$59.05
Patriot header flange gaskets are thick, tear-resistant, and cut to match your Patriot header flanges. Constructed from graphite coated steel core laminate, the gaskets are available in a variety of styles. Order the model recommended for your application.
( 9 )
$58.35
Cometic Gasket's commitment to cutting-edge technology has produced superior-quality gaskets like /Trick Flow® by Cometic MLS exhaust gaskets. Constructed from multiple layers of strong stainless steel, these gaskets have excellent rebound ability and corrosion-resistant characteristics. The outer layers are coated with a heat-resistant, rubber-based material to create a seal that can withstand a variety of sealing and load conditions and surfaces. These gaskets are ideal for all types of head and block material and their design promotes an even torque load across the sealing surface, allowing for measurably reduced bore distortion.
( 23 )
$52.99
Unwanted engine noise and fumes under the hood can often be traced to poor seals. Fel-Pro offers an extensive line of replacement gaskets to provide a leak-free connection between your intake and exhaust manifolds. Designed for OE-style fitment on hundreds of specific makes/models, the gaskets are crafted from top-quality materials, such as steel core laminate and compressed fiber laminate. Order the gasket configuration to match your exhaust manifold specs.
( 193 )
$74.99
—
$114.99
Ajusa offers a wide range of gaskets covering various engine parts, and all are made from premium materials fitting their specific function to ensure optimal sealing and leak-free performance. The job of exhaust flange gaskets is to prevent leaks, making sure that exhaust fumes do not leak into any other part of the vehicle, particularly the passenger cabin. Ajusa exhaust flange gaskets perform this job efficiently with the proper fit for your specific application. Select the flange gaskets designed for your vehicle's exhaust system.
Not Yet Reviewed
$52.99
Ajusa offers a wide range of gaskets covering various engine parts, and all are made from premium materials fitting their specific function to ensure optimal sealing and leak-free performance. The exhaust manifold gasket seals the surface space between the cylinder head on your engine and the beginning of the exhaust manifold, so that those gases cannot accidentally escape back into the engine. Ajusa exhaust manifold gaskets perform this job efficiently with the proper fit for your specific application. Select the gaskets designed for your vehicle's exhaust system.
Not Yet Reviewed
$83.99
Doug's premium header flange gaskets are made extra-thick from specially formulated gasket material. These gaskets are rated up to 1,100 degrees F and handle exhaust pressures of up to 3,700 psi. Each gasket is designed for an exact port match with Doug's headers.
( 29 )
$50.35
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
