Availability
Showing In Stock Items. Show All 30 Items.
Summit Racing™ LS oil galley barbell plug kits give you a cool, affordable way to improve your LS engine's oiling system. They include the rear "barbell" or "dogbone" which has a smaller stem diameter than the factory plastic unit to improve flow to the filter, a solid plug to delete the filter bypass in the oil pan, and a step washer and bolt to support the unsupported side of the oil pump pickup tube retainer.
( 6 )
$24.99
BTR offers DOD delete plug kits that provide an easy way to get rid of pesky, failure prone DOD/AFM lifters in your LT powered pickup truck. These plug kits include the necessary components to delete the problematic DOD system on your Chevrolet GM Gen V+ L84/L87 engine to remove the 8-cylinder AFM/DOD solenoids during a delete. From F-body trucks to Corvette, Sierra to Silverado, G8 to GTO, Brian Tooley Racing has just the components you need for making power with your LS or Gen V ride! Note: These cylinder deactivation components will not work for the L83/L86 engines.
( 2 )
$40.00
ICT oil galley barbells have a "weighty" job to perform. Often overlooked, but very much needed, these oil diverter valves fit in the back of your LS engine block and are essential to the oil pressure circuit. Little things may cause a big headache; for your build, replace the plastic barbell with a new one from ICT Billet.
( 1 )
$35.99
Where legally permissible when doing an LS or LT swap, ICT Billet fuel vapor purge solenoid plugs make life easier by blocking off the intake manifold EVAP port. They can be installed in seconds and come packaged and ready to go.
( 25 )
$22.99
Earl's Performance clutch adapter fittings convert OEM master cylinders, clutch release bearings, and slave cylinders to accept a better replacement for your less-than-perfect OEM plastic hose. These quick-disconnect fittings work perfectly with Earl's Speed Flex hose (not included). They're made from 304 stainless steel or aluminum and include EPDM O-rings. The adapter fittings are offered in several early and late model vehicle styles, straight and 90 degree angle. Check your OEM hose for the proper fit.
( 27 )
$24.14
On Sale
Earl's Performance offers a complete line of power steering adapter fittings to accommodate a variety of thread sizes to plumb your pump. Earl's offers the most complete line of adapter fittings in the industry.
( 23 )
$49.95
Allstar Performance oil galley plugs are used by the factory to divert oil to the factory oil filter and prevent unfiltered oil from circulating through the engine. The original GM barbells are a nylon material that may become brittle over time and should be replaced when performing a rebuild or upgrades. These replacement galley plugs are offered in multiple materials for a variety of year/make and engine applications.
( 4 )
$26.39
ICT Billet coolant crossover delete kits are coolant/steam port block-off plate sets for LS-Series engines. Kits include two coolant ports, two O-rings, and two bolts. These kits do not have holes for crossover tube attachment. Made from aerospace-grade billet aluminum with a natural finish, they can be installed on the front or rear of the cylinder heads.
( 12 )
$29.99
On Sale
The original GM brazed vent tube manifold does not take into consideration the aftermarket intakes and accessories we put on our performance vehicles. Replace the rigid hard lines with Earl's Performance LS steam vent adapters. These adjustable outlets are O-ring seal adapters designed to convert to -3 or -4 AN plumbing. Earl's steam tube adapters are the most adjustable and lowest profile available. These adapters look as nice as they are installation-friendly. There are several kits available to allow for the optimal routing on your application, including dual outlet options, which eliminate the need for a Tee adapter.
( 18 )
$76.35
—
$82.45
$41.99
—
$45.35
ICT Billet offers fuel pressure regulator bypass plugs for a variety of applications. They install in place of the factory integrated regulator that is mounted to the fuel rail on truck intake manifolds. These plugs are required when using an external fuel pressure regulator. Machined from aerospace-grade billet aluminum, the plugs are compatible with LS Gen 3 truck/SUV round fuel rails. They include an O-ring and re-use the factory retainer clip. Order the model designed for your vehicle.
( 1 )
$29.99
Replacing your factory fuel lines? With ICT Billet fuel pressure sensor adapters, you can easily replace them with braided hose and retain your factory fuel pressure sensor. Made from aerospace grade billet aluminum and available in -6AN, -8AN, or 1/8 in. NPT. ICT Billet fuel pressure sensor adapters keep you connected.
Not Yet Reviewed
$36.99
ATS Diesel fuel rail pressure plugs replace the stock or shimmed pressure relief valve. Removing the stock pressure relief valve will help to maintain fuel rail pressure during full throttle driving by completely blocking the pressure relief port. It also helps to eliminate low fuel rail pressure codes that are caused by insufficient PRV spring pressure.
( 7 )
$30.00
Trick Flow® engine steam line hoses for GM LS service your steam tube system. Whether you're plumbing just the front of your heads or all four corners, these hose kits will replace your old with new performance. Choose Trick Flow® braided black nylon covered rubber hose or braided stainless steel covered rubber hose.
( 17 )
$40.99
Detroit Speed brake master cylinder fittings are designed to replace your old worn out and corroded fittings. Manufactured from high-grade aluminum, these fittings help to evenly distribute fluid to your wheel cylinders. Detroit Speed offers brake master cylinder fittings to fit and work on various applications.
Not Yet Reviewed
$21.95
Dorman transmission line connectors are designed to thread-in your automatic transmission case and allow you to connect to an external cooler. They're manufactured from high-quality material that meets or exceeds OEM standards. Available in different thread sizes and configurations, Dorman transmission line connectors will help get you connected. Order the adapters compatible with your application.
( 17 )
$25.99
Mopar Replacement quick connect transmission fittings are OE replacements you can count on to fit and function as expected. These Mopar fittings are made from quality, long-lasting materials to repair and restore leak-free performance in your Chrysler, Dodge, Jeep, and Ram vehicles.
( 1 )
$31.99
Dorman heater hose connector fittings are available for a wide range of cars, trucks, and vans--both application-specific and universal models. These parts can be used as replacements in areas such as the heater core inlet and/or outlet, and the radiator surge tank. The fittings are stocked in various sizes, materials, and shapes (straight, elbow); some are hose barb style, while others are quick-connect. Eliminate aggravating leaks in your cooling system with the help of these Dorman heater hose connector fittings.
( 56 )
$20.99
—
$23.99
Plumb just the front of your heads with Trick Flow® engine steam line plumbing kits for GM LS. It's an easy upgrade from factory steam tubes. Your engine front-only plumbing kits include: * 2 ft. 1/4 in. black rubber hose * Six 1/4 in. hose clamps * Two 4 AN 90 degree fittings * Stainless steel tee barb fitting
Not Yet Reviewed
$42.99
Mount your mass airflow sensor with ICT Billet mounting flanges. Designed to be welded, they are radius-cut on the bottom to accept 4 in. pipe. They include mounting bolts, and of course, they are all manufactured from aerospace-grade 6061 billet aluminum.
( 6 )
$36.99
Rein Automotive OE Quality coolant hose connectors are designed to be direct replacements. Identical in form, fit, and function, each connector features high-quality construction manufactured to strict engineering standards/specifications in materials and tolerances. Rein OE Quality coolant hose connectors ensure durability and long service life. Select the one designed for your application.
Not Yet Reviewed
$29.99
—
$41.99
All Balls Racing fuel valve kits are complete OEM replacements to restore your the fuel system of your off-road ATV or bike. These fuel valve and hose kits will include fuel valve, fuel line, fuel line clamps, and fuel valve seal/O-ring. Fuel valve bolts and washers are included where applicable. Select the kit designed for your off-road machine.
Not Yet Reviewed
$48.40
—
$51.26
Corroded, stripped, or damaged sensor bungs no longer means having to replace an entire assembly, pipe, or component. Dorman sensor bung repair kits offer an OE solution—a cost-effective fix—that allows you to replace/repair just the damaged part, saving time and money.
( 1 )
$21.99
HardDrive check valve assemblies/EFI lines are designed as OEM replacements and include check valve, fuel line, and fittings. Available for several Harley® models, select the check valve assembly with line designed for your motorcycle.
Not Yet Reviewed
$34.16
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
