Availability
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 54 )
$204.99
$199.99
Injector Dynamics ID1050x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1000 and X Series, these injectors are a drastic improvement over previous series from Injector Dynamics. Order the set recommended for your vehicle. Features include: * Requires only 8 V for consistent operation at 8 bar * Corrosion resistance makes them compatible with all automotive fuels * Compact bodies allow fitment in over 200 applications * Improved internal flow path—without sacrificing low flow performance * Stronger magnetic circuit offers stable operation up to 10 bar * Replaceable inlet filter extends service life
( 8 )
$546.00
—
$1,092.00
Summit Racing™ fuel tanks are designed to meet or exceed the quality of factory fuel tanks. Whether you have a track car, classic car, or car you're restoring, Summit Racing™ has the high-quality fuel tanks you're looking for.
( 227 )
$434.99
S&B Filters cotton filter cold air intake kits are designed to improve airflow and bring down the temperature of the air that enters your engine. To achieve more airflow, S&B oiled cotton filters are built with four layers (or eight for diesels) of the highest-quality cotton gauze. They use deeper, wider pleats with more per filter. Plus, their manufacturing process yields almost no "bleed", creating a greater open surface area. All of this adds up to more airflow with excellent protection. The filter elements are washable, reusable, and will protect your engine from harmful dirt and debris. Gain performance and a sporty, high-tech appearance under the hood of your rig with an assist from the S&B Filters cotton filter cold air intake kit best suited for your application. More product features, items, and specifications include: * Silicone rubber (not urethane) filters and couplers help ensure they won't degrade or crack, while resisting temperatures as high as 400 degrees F * Helps balance air/fuel ratios to improve gas mileage * Cross-linked intake tube minimizes restriction * Custom air box (where applicable, including some with clear lids) keeps loose dirt and turbulent underhood air out of your intake * Specific year, make, and model design makes them simple to install, with help from the easy-to-use installation instructions and illustrations * Included mounting hardware for replacing your stock assembly in 30 minutes or less in most cases
( 435 )
$349.00
These Ford Performance Parts 4.6L 3-valve performance intake manifolds feature high-flow runners and an open plenum design for maximum flow, while still fitting underneath stock Mustang hoods. They are manufactured from lightweight composite plastic and have been tested up to 20+ psi; perfect for use in forced induction applications. Ford Performance Parts 4.6L 3-valve performance intake manifolds include a set of intake gaskets to complete the installation. Additional technical information: * Works well with Ford Performance M-6550-3V hot rod camshafts, M-6049-N3VPA high performance CNC-ported 3V cylinder heads, and M-9926-3V 62mm throttle bodies * Less heat soak than aluminum intakes * MAP sensor mounting boss for speed-density applications * Calibration required (not included) * Throttle body not included * Does not fit with Ford Performance strut tower braces
( 11 )
$786.99
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 29 )
$371.99
If you need to replace your Roush Performance intake air filter, one of these replacement air filters is the ticket. These cotton gauze filters are reusable direct replacements designed for use with your Roush Performance air intake.
( 26 )
$99.00
Clearance
CSF intercoolers are a complete, full line of intercoolers--with coverage ranging from Audi to Volvo. Several different styles are available, including plastic-aluminum and all-aluminum, with standard tube and fin cores as well as heavy-duty bar and plate cores. CSF OE-replacement intercoolers provide a drop-in fit requiring no modifications. All CSF intercoolers are built to OE specifications, and incorporate the same high-quality and value that CSF has been known for and has represented in the industry for decades.
( 18 )
$367.99
FASS Fuel Systems Titanium Signature Series fuel/air separation systems are a beneficial upgrade for your diesel engine. Titanium systems feature compact designs, powerful motors for improved fuel flow, and advanced filtration that's far superior to your factory fuel filter. Their diesel fuel lift pumps are engineered to be top performing, reliable, long-lasting units—and are backed by a limited lifetime warranty on all light-duty diesel applications. The Signature Series also features FASS revolutionary Whisper Technology that effectively and drastically reduces the sound levels of these diesel systems to a "whisper," while at the same time increasing fuel flow rates. Whether stock or highly modified, FASS Titanium Signature Series diesel fuel systems are available to handle your engine's horsepower. Features and benefits: * Systems available with flow rates up to 290 gph * Advanced filtration removes water, air, vapor, and debris with a filtration rating of 2 micron * Smoother engine idle * Protects and extends the life of your injectors * Whisper Technology (FWT)—reduces noise levels without reducing flow rates * Performance Radius Cuts (PRC)—advanced machining technique creates smooth cuts within aluminum housing * Improved fuel volume delivery * Mass Flow Return (MFR)—technology used to continually "polish" your fuel by keeping positive pressure on fuel being delivered to your engine, guaranteeing the cleanest fuel possible. Also prevents cavitation, along with galling and scoring. * Improved cold weather starts * Decreases carbon monoxide and carbon dioxide emissions * Easier bolt-on bracket mounts do not require any drilling or welding to mount new pump * 1/2 in. fuel lines and ports * Fuel mileage improvement * 30,000 mile filter life expectancy
( 58 )
$799.00
—
$849.00
Ford Performance Parts offers these throttle bodies as stock replacements for 2005-10 Mustang GT applications equipped with 3V, 4.6L engines. After years of wear and work, the throttle body of your Mustang GT can become damaged or broken, inhibiting and altering the amount of air entering your engine. Brand new, direct replacement throttle bodies featuring 55mm dual throttle bodies; they are made using quality materials for durable, reliable performance.
( 12 )
$246.99
DeatschWerks fuels your passion for performance with fuel injectors specifically designed and engineered for your Sport Compact, Modern Muscle, and European vehicles. DeatschWerks fuel injectors are manufactured to fit your OE harness, fuel rail, and manifold. Because they are application-specific, you'll spend less time installing and tuning, so you can spend more time enjoying the increased performance of your ride! They provide an excellent spray pattern and atomization for optimized idle and tuning. Each set is flow-matched both statically and dynamically, and flow-balanced to within one to two percent. A flow report is included with each set of DeatschWerks fuel injectors.
( 67 )
$459.00
—
$1,049.00
Walbro electric in-tank fuel pumps are available in a variety of flow ratings, including pumps that flow significantly more fuel at higher pressure. The outside dimensions, however, of many pumps are compact enough to fit existing hanger assemblies, without modification. All pumping components have been validated to OEM specifications for use in E85/flex fuel applications. Most Walbro in-tank fuel pumps utilize a proven gerotor design. Some high-performance models, including those designed for engines with more than 750 hp, feature a dual-channel turbine design for maximum efficiency in high-pressure and high-temperature applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's higher than conventional pumps. Some pumps require modifications to system wiring, fuel lines, and the fuel module, and should be professionally installed. Installation kits including a fuel strainer, fuel hose, harness pigtail, clamps, and wire connectors are sold separately.
( 371 )
$109.99
—
$457.99
Summit Racing offers diesel fuel injectors for a wide range of vehicle and engine applications, from the 1990s and up. These OE-quality replacements help you obtain maximum fuel efficiency and power from your diesel engine. Order the model recommended for your vehicle.
( 16 )
$213.99
Lots of cool, clean air has been shown to increase horsepower—and these cotton replacement air filters from S&B deliver both unrestricted flow and high filtration. The 8-layered cotton filters protect your engine from harmful dirt and debris, while the couplers and end caps are manufactured from premium silicone rubber to help prevent cracks. And because the filters are cleanable and reusable, they're a great performance value. S&B Filters elements are available in numerous styles and sizes for compatibility with nearly any engine bay. Select from nearly a hundred universal and application-specific models.
( 57 )
$69.00
Ford Performance Parts Hi-Flow throttle bodies provide more air and produce more power than stock throttle bodies, while also providing good drivability and low-speed control. Available in a variety of styles, number and size of venturis, materials and finishes, they are precision-machined to ensure consistency and accept all stock sensors and controls. Depending on application, features include: * All factory sensors installed; no need to tear apart your original throttle body * Calibrated for idle air flow using the same procedure as production throttle bodies * Consistent high flow * Great looks and underhood "bling" * Validation through hundreds of hours of dyno, racing, and street performance driving * All cfm ratings calibrated at 28 in. of water, measured on SuperFlow SF-1020 flow bench
( 22 )
$869.99
aFe Magnum Force Stage 2 Pro 5R air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. These Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, oiled, conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. In addition, a pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter.
( 67 )
$350.00
—
$361.00
Increase performance and torque with one of these Roush Performance Ford Mustang V8 cold air intake kits. They include a lifetime high-flow air filter element that can be cleaned and re-oiled, a 4 in. roto-molded intake tube that is larger than any other intake on the market, and a lightweight, composite cool air dam. Roush Performance Ford Mustang V8 cold air intake kits install easily with no cutting or drilling required.
( 6 )
$355.15
On Sale
Steeda's CNC-machined billet charge motion plates are superior upgrades for your Mustang. Steeda's charge motion plates are designed for a better port match to the intake manifold and cylinder heads than the original plates, reducing turbulence and improving airflow in the intake path for more horsepower and torque. Beautifully CNC-machined out of 6061-T6 aluminum for superior strength and light weight, Steeda's charge motion plates are available with tapped nitrous fitting holes for custom nitrous applications.
( 6 )
$349.95
$314.96
Dorman intake manifolds are precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. They are thoroughly tested to ensure top-quality OEM construction and superior reliability. Dorman manifolds are offered in different styles, and all will provide a trustworthy design with a perfect fit and reliable construction for your vehicle.
( 157 )
$208.95
—
$435.95
The K&N Black Series synthetic air filter elements feature oil-free DRYFLOW synthetic media. These low-restriction air filters are designed and manufactured for a wide variety of applications. Best of all, they can easily be washed by using K&N synthetic air filter cleaner (sold separately). The air must flow--and it will when you order the K&N Black Series DRYFLOW universal air filter elements best suited for your application!
( 22 )
$79.18
S&B Filters fuel tanks maximize the space under your diesel truck and empower you to fly by more gas stations like a compact, fuel-efficient car. The folks at S&B know even lifted trucks often sacrifice clearance for larger holds. That's why they design their tanks with a contour around the driveshaft area, helping you maximize clearance. A transfer pump fitting allows you to pull fuel from your now larger tank for equipment—saving valuable space in your truck's bed. Spend less time at the pump and more time driving with the S&B high-capacity replacement fuel tank designed to fit your vehicle. Features, items, and specs: * Brass vent and rollover vent valve * Included baffles cut down on fuel sloshing * Integrated fuel sump for aftermarket fuel pumps * Integrated OEM-style fitting for sending unit installation ease * Front cradle support design (instead of a band that wraps under) to help avoid band debris damage and failure where it's most likely to occur * Front support skid plate on some models * No modifications necessary for installation
( 5 )
$849.00
—
$1,249.00
K&N 77 Series high-flow performance cold air intake kits are aftermarket air induction kits designed for trucks and sport utility vehicles. They include a free-flowing, mandrel-bent intake tube (various materials and color options) with a Million Mile Warranty. K&N 77 Series cold air intake kits replace your restrictive factory air filter and intake housing, maximizing your power and acceleration. They include a washable, reusable air filter and offer guaranteed performance for their vehicle applications.
( 478 )
$419.99
—
$472.99
Spectre Performance cold air intake kits provide better acceleration and fuel economy for your truck or SUV. They're designed to replace your factory air filter and air box assembly, eliminating the restriction as they smooth and straighten airflow. The high-flow design of these intakes enables your engine to breathe in a larger volume of air, resulting in more usable power throughout the engine's entire rpm range. Hundreds of models are available, with various tube and filter options. Choose the kit tailored for fitment and performance on your make/model application.
( 832 )
$171.99
—
$199.99
K&N's universal performance air filters are designed and manufactured for a wide variety of applications, including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and more. Many hundreds of models are are available, so regardless of the angle or offset diameter of your air intake, there is likely a K&N universal air filter for your equipment. All filters are constructed with ultra-strong, molded, pliable rubber flanges, which absorb vibration, allow for secure attachment, and can be stretched for up to 1/16 in. (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable. Order the style and size that best suits your needs.
( 308 )
$58.66
—
$146.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
