Availability
Replace your worn or ticking lifters with premium-quality valve lifters from Crown Automotive. They're available in a variety of hydraulic styles—such as flat tappet, roller, and lash adjuster. Order the model designed for fitment on your specific vehicle.
( 2 )
$18.99
—
$146.99
Replace your cracked and worn body mount bushings with Crown Automotive body mounting kits. They come complete with bushings, tubes, and retainers. These are natural rubber bushings that will not give a harsh ride like polyurethane bushings do.
( 23 )
$120.99
—
$177.99
Differentials are the unsung heroes of vehicle performance. Some are open, while others have Trac-Loks, and a few are lockers. Crown Automotive differential carrier rebuild kits are designed and built to keep them working properly. Built to OEM specs for excellent fit and reliable performance. They provide the necessary parts to update each differential and keep power going where it belongs. Differentials put their all into transferring power from the transmission to the axles. When they decide to take a break, put them back to work with Crown Automotive differential carrier rebuild kits.
( 3 )
$113.99
—
$324.99
A worn oil pump drive assembly will probably trigger a check engine light and will make a funny squeaking sound that has been described as a laughing barrel of monkeys, however it is no laughing matter. The factory design poses a lack of lubrication, that could result in premature failure. Crown Automotive oil pump drive assemblies (OPDA) feature redesigned internals to eliminate the problems with the factory units, a seal under the upper bearing which caused the bearing to fail prematurely. Crown's OPDA has the seal relocated to above the upper bearing and an oil groove in the shaft which is designed to bring oil up to both the upper and lower bearings. Replace your Jeep's worn unit with the peace-of-mind offered with Crown oil pump drive assemblies.
( 22 )
$107.99
Missing some body parts? Crown Automotive will make your Jeep whole once again! Their fender flares are molded from heavy-duty black ABS plastic. They are available in sets and kits to redress your whole rig and include hardware. Only need one? They are also offered individually to use with your existing hardware. Preserve your Jeep's good looks with new replacement fender flares from Crown Automotive.
( 28 )
$42.99
—
$154.99
Crown Automotive rocker arms are direct-fit OE-style replacement parts for your Jeep. Rocker arms are designed to open and close at precise moments to allow the engine to run efficiently at all speeds. If you need rocker arms, then you need Crown Automotive parts. They are developed to deliver optimal performance and can withstand today's driving challenges.
( 9 )
$13.99
—
$131.99
Getting adequate fuel to your engine is paramount to achieving the performance you're looking for. Crown Automotive fuel rails deliver the volume you need for your Jeep's engine. Built from stainless steel, these rails are built to precise tolerances for maximum performance and longevity. Crown Automotive is the go-to company for premium-quality factory replacement parts for Jeeps.
( 26 )
$163.99
If it weren't for axles, the wheels on your vehicle wouldn't be moving anywhere. When those all-important parts twist, break, or have other difficulties, simply replace them with Crown Automotive direct-fit axle shaft assemblies. These assemblies are available for numerous axle types, such as CV-style, C-clip, front inner and outer, and bolt-in. While some replacement axles use hardened 4340 chromoly shafts, most are designed and steel-built to OEM specs for reliability and fitment. Each axle is engineered for its particular location and differential. Crown direct-fit assemblies cover many models of vehicles.
( 93 )
$84.99
—
$281.99
Crown Automotive clutch fork pivot balls allow for the adjustment of the release fork height when the clutch assemblies are changed. An improperly aligned clutch fork can increase the amount of pedal throw required to release the clutch. The surface where the pivot ball and clutch fork meet should be round, without any flat spots. These replacement parts from Crown are a direct fit for your Jeep.
( 5 )
$8.99
Crown Automotive manual transmission input bearing retainers are heavy-duty steel retainers built to replace parts, which are prone to suffer oil starvation at slightly deficient oil levels. Retainers often get worn or damaged due to being in constant motion any time the engine is running. Worn or defective retainers may create excessive noise, which continues as long as the engine runs. A severely worn input shaft bearing can cause the transmission to slip out of gear while moving. So, don't wait; go with Crown and travel with peace of mind.
( 6 )
$99.99
Maintain the ability to move forward with Crown Automotive differential clutch kits. These kits will renew the operation of your limited-slip differential. Clutch discs and plates can wear from constant use. When one of your rear wheels can't get traction, you'll be glad you replaced your worn-out clutch packs with Crown differential clutch kits.
( 2 )
$89.99
—
$253.99
Crown Automotive bumpers are stock replacements for your Jeep. Simply take the stock end caps off of the originals and bolt them up to these. They have holes drilled in the stock locations for an easy installation. Crown Automotive bumpers are your best bet when it comes time to replace those damaged, rusted, or worn-out stock bumpers.
( 31 )
$82.99
—
$102.99
Counter vibrations with Crown Automotive harmonic balancers. With these dampers attached, destructive torsional vibrations will be reduced, and this will help extend the life of your crankshaft. Crown has a selection of OE-fitting replacements made of iron and powdercoated. There is a lot of power and torque produced under the hood of your vehicle and Crown Automotive harmonic balancers will keep it all safely under control.
( 23 )
$38.99
—
$77.99
Crown Automotive drag links and tie rod assemblies are quality replacement parts to eliminate play in your steering wheel. Jeeps are made to be driven hard, and that can take a toll on your steering components. Trust your Jeep to Crown, a leading manufacturer of quality OE parts.
( 17 )
$89.99
Crown Automotive pitman arms convert the angular motion of your drag link and can correct that sloppy steering issue. These are direct-fit parts made from durable steel material, making them perfect replacements for your worn-out steering components.
( 20 )
$25.99
—
$48.99
You can correctly adjust your speedometer when you change tire size or axle gear ratios with speedometer gears from Crown Automotive. These gears correct the tooth count to maintain the proper reading on your speedometer. They are factory-quality and easy to change out. Crown Automotive offers a large line of electrical replacement parts for Jeeps.
( 4 )
$36.99
—
$83.99
You're just about to conquer a tough, rocky, tire-dropping section of trail when, "BAM!"—the U-joint grenades and takes out an ear on the yoke. Thankfully, you came prepared with Crown Automotive driveshaft yokes so you can make the repair and keep on riding. These yokes are designed and built to OEM specs for excellent fit and reliable performance. Whether you are hot rodding on the street or on a trail ride, always be prepared with Crown Automotive yokes.
( 29 )
$46.99
—
$75.99
When your control arms begin to wear out, they can adversely affect the rest of your suspension system. And a clunky, vibrating vehicle can be unbearable to drive. Crown Automotive replacement control arms are manufactured from heavy-duty steel or cast iron for long-lasting durability. They're available in a variety of styles—some with a ball joint and/or bushings included. The control arms are offered for more than a dozen positions on your vehicle. Order the model recommended for your application.
( 21 )
$25.99
—
$238.99
Stay comfortable in frigid weather. Crown Automotive heater cores feature the same design as the original Jeep cores to ensure accurate fit, form, and function. With a properly operating heater core, you can be warm when the mercury plunges and see clearly out of your windshield on colder days.
( 1 )
$72.99
—
$122.99
Cracks and leaks in a factory air charge outlet hose can sap engine power. Thankfully, Crown Automotive offers the perfect solution with direct-fit OE replacement intercooler pipes. These durable rubber hoses are identical to original equipment specifications to provide accurate fit and function—and meet or exceed quality standards. They're available for a variety of submodels and engine bay connections. Best of all, they're affordably priced!
Not Yet Reviewed
$38.99
—
$83.99
Open up and let me in!! Maybe it's time to replace the worn-out or damaged outside door handles on your Jeep. Crown Automotive offers dozens of replacement exterior door handles for your application. They're direct fit replacements for original equipment doors.
( 13 )
$21.99
—
$81.99
If your oil filter connector has stripped threads, it can cause a major oil leak. Replace a worn or aging oil filter adapter connector with a new one from Crown Automotive to keep your engine running properly and your garage floor and driveway clean. These connectors are direct replacement OE-style oil filter adapter parts.
( 10 )
$6.99
Crown Automotive rocker arm hold-down bolts are high-quality steel bolts made to fit specific applications. These pivot bolts are used to secure your rocker arm shafts when the old bolts break, become corroded, or have damaged threads. Crown Automotive is a leader in replacement parts for many vehicles.
( 6 )
$2.99
Crown Automotive fuel injectors supply optimum fuel efficiency for your engine. These quality components deliver maximum spraying action to give your ride the power it needs when it needs it most. The units are available for a wide range of vehicles—including many Jeep and Mopar family models. Give your vehicle a "shot" at peak performance with Crown Automotive fuel injectors.
( 4 )
$37.99
—
$99.99
Modal Header