Availability
Crown Automotive clutch fork pivot balls allow for the adjustment of the release fork height when the clutch assemblies are changed. An improperly aligned clutch fork can increase the amount of pedal throw required to release the clutch. The surface where the pivot ball and clutch fork meet should be round, without any flat spots. These replacement parts from Crown are a direct fit for your Jeep.
( 5 )
$8.99
If your oil filter connector has stripped threads, it can cause a major oil leak. Replace a worn or aging oil filter adapter connector with a new one from Crown Automotive to keep your engine running properly and your garage floor and driveway clean. These connectors are direct replacement OE-style oil filter adapter parts.
( 10 )
$6.99
Crown Automotive rocker arm hold-down bolts are high-quality steel bolts made to fit specific applications. These pivot bolts are used to secure your rocker arm shafts when the old bolts break, become corroded, or have damaged threads. Crown Automotive is a leader in replacement parts for many vehicles.
( 6 )
$2.99
Crown Automotive clutch fork return springs will provide OE fitment and function. The proper movement and pressure of your clutch components depend on the many springs involved. No matter which throwout fork or lever springs you need for your classic rig or newer ride, Crown can help keep your clutch in optimum operation for smoother shifts. Choose your replacements from the selection of Crown clutch return springs for improved performance.
( 17 )
$2.99
Engine braking (using one's gears to slow down) puts peak stress on the lower end bolts. Crown Automotive replacement connecting rod bolts are made of sturdy steel and can withstand greater pressures when properly torqued to the correct specs. Quality rod bolts are so crucial in engines that spin, and Crown is an industry leader in superior aftermarket parts.
( 2 )
$9.99
Replace your old head bolts with Crown Automotive cylinder head fasteners. Head bolts withstand huge clamping loads and forces in their fight to keep the heads tightly sealed against their gaskets and the block. These heavy-duty fasteners are designed to hold parts together tightly. They're crafted and built to OEM specs for proper fit, form, and function. Whether you're repairing a blown head gasket or rebuilding a motor, order the Crown Automotive cylinder head fasteners designed to fit your application.
( 9 )
$4.99
Crown Automotive exhaust clamps slide right on and tighten up to create a quality seal when joining pipes together. These are basic muffler U-bolts constructed of steel for durability and strength. They are available in a variety of diameters and thread sizes to accommodate your particular exhaust system application.
( 8 )
$3.99
—
$5.99
Crown Automotive transfer case shifter bushings are available to replace broken or worn-out bushings on your shift lever. If the bushings fail, your transmission won't engage. Crown Automotive is the go-to company for quality factory replacement parts so you and your Jeep can get moving again.
( 4 )
$2.99
From the time your vehicle starts moving until it stops, the parts in the transfer case are in action and under stress. When time, use, and stresses overcome these parts, replace them with Crown Automotive transfer case components. These components are OE-quality and designed to directly replace the originals. Transfer cases are constantly on the go, and when put into 4WD, they are downright abused. Rebuild or refresh your vehicle's case as needed with Crown Automotive transfer case components.
( 32 )
$2.99
—
$9.99
Crown Automotive valve locks are keepers! The stamped steel parts are small but necessary, and offer the proper fit and function you expect and need. Their engine valve spring retainer locks are available for many specific Jeep, Dodge, Ram, Chrysler applications.
Not Yet Reviewed
$1.99
—
$2.99
Crown Automotive exhaust insulators are designed to minimize vibration for optimum exhaust system performance. These durably constructed pieces are constructed from rubber for a lasting service life and they provide a direct factory fit. Upgrade your worn-out exhaust hangers with insulator-style replacements from Crown Automotive.
( 4 )
$8.99
Pushrods are one of the internal engine parts that can bend or experience metal fatigue over time. Crown Automotive steel replacement rods will help you with maintenance or a complete engine rebuild. These rods are available in a variety of lengths for proper fitment on your application.
( 4 )
$3.99
—
$4.99
Crown Automotive timing cover gaskets will create a working seal between the timing cover and the engine block. After all, oil leaks can damage your gaskets, in which case they can no longer protect the timing belt and need to be replaced. These gaskets may be made from standard material, a plastic/rubber-style, or a silicon/steel seal. Crown helps you to get the perfect components for your application to protect your timing chain and gears.
( 1 )
$1.99
—
$13.99
It doesn't matter if you're driving the highways or off-road trails, the more miles put on a vehicle equates to a higher probability of parts wearing out. Crown Automotive steering knuckle to hub bolts are ideal for replacing worn bolts and taking the slop out of the joint.
( 6 )
$5.99
When your original seals become hard and brittle, replace your valve cover grommets with Crown Automotive quality replacement parts for your Jeep. They are well-made, a snug direct fit replacement, and will install easily. Your seals may look fine, but if you're noticing a little oil on top, stop that leak with grommets from Crown.
( 17 )
$2.99
—
$3.99
Crown Automotive manufactures the most reliable set of lug nuts for your Jeep on the market today! These heavy-duty lug nuts are constructed out of high-quality steel and are available in various finishes and thread sizes to complement your vehicle. Crown Automotive provides you with a dependable set of lug nuts to ensure that the wheels on your ride are safe for the road ahead.
( 14 )
$1.99
—
$5.99
Crown Automotive driveshaft bolts are made from strong steel to provide secure fastening. When you need parts for your Jeep, Chrysler, or Dodge—no matter how small—check out Crown and their line of replacement parts. Connect your front driveshaft and transfer case with their driveshaft bolts.
Not Yet Reviewed
$3.99
When you see oil leaking from your Jeep's rear axle, it's time to order new Crown Automotive axle seals. These seals are designed for oil bath axles and are built identically to the originals for excellent fit and finish. Whether your brakes end up coated in oil or the lube simply runs onto the ground, these economical Crown Automotive axle seals will solve messy problems that could lead to more serious issues. Dozens of styles are available to service numerous vehicle applications.
( 13 )
$5.99
—
$11.99
Crown Automotive axle oil slingers will help you guide your axle through the inner axle seal with ease. Crown makes these handy, yet hard to find, parts for many years, makes, and models.
( 2 )
$2.99
—
$6.99
Crown Automotive replacement nuts are sturdy components made to OE specs to solidly anchor many automotive applications. Crown offers an extensive line of quality replacement parts for Jeep, as well as a growing line of parts for other vehicles. Check applications for fitment.
( 5 )
$1.99
—
$3.99
Crown Automotive plastic nut retainers can be used to fastener different exterior trim on your Jeep. These nylon pieces are needed to mount the front or rear license plate or the front parking lamp of your Jeep.
( 1 )
$1.99
Replace hard and brittle floor pan plugs with Crown Automotive high-quality direct fit replacement plugs. These black rubber plugs install in seconds offer a snug, secure fit to the floor pan holes to prevent leaks. They are available for a wide variety of Jeep applications.
( 7 )
$4.99
—
$5.99
The proper exhaust hanger and/or insulator can often quiet the rattling sound under your chassis. Crown offers a selection of tailpipe/muffler hangers and exhaust insulators made from heat-resistant, quality rubber and metal to fit your Jeep, Dodge, or Ram with quiet performance. Mount your exhaust with the help of Crown Automotive exhaust hangers and insulators.
( 3 )
$12.99
Crown Automotive brake bleeder screws are engineered to help you effectively bleed your brake system and restore the brakes to proper operation. These screws are direct replacements for your brake bleeder valves and allow you to purge your brake lines of air bubbles and maintain hydraulic pressure.
Not Yet Reviewed
$1.99
—
$3.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
