Availability
Showing In Stock Items. Show All 149 Items.
ACDelco GM Genuine Parts engine coolant sensors are a GM recommended replacement component for many vehicles on the road today. These original equipment engine coolant sensors are manufactured to fit your GM vehicle, providing you the same performance, durability, and service life you expect from General Motors.
( 68 )
$18.99
These Chevrolet Performance knock sensor grommets are OEM replacement grommets for your GM knock sensors. They hold the bottom of the knock sensor onto the intake valley cover on all Gen III engines, except for the LS7. If you need new knock sensor grommets, make sure that you get Chevrolet Performance OEM replacements to ensure long-lasting performance and durability.
( 3 )
$17.99
Don't take chances with old, questionable, or faulty coolant temperature sending units that can give misleading information to you and your vehicle's computer. Standard Motor Products replacement coolant temperature senders are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These temperature sensors are available in many sizes and configurations to fit a wide range of cars spanning several decades. Trust your vehicle's electrical system needs to Standard Motor Products.
( 99 )
$12.99
—
$18.99
ACDelco offers air charge temperature sensors for thousands of applications from the 1980s and up. These direct-fit OE replacements install easily and deliver factory-style performance. Maintaining the right temperature for the correct mix of air and fuel is crucial to engine efficiency. Order the sensor recommended for your vehicle.
( 20 )
$18.99
ICT Billet LS idle air control valve and throttle position sensor bolt kits are application-specific for use in mounting the TPS and IAC to the throttle body on LS style engines. These replacement kits consist of two each: M4-12mm and M4-8mm bolts, and four washers to facilitate installation. They fit 1997-2014 GM LS series engines.
( 2 )
$17.99
Summit Bucks
Delphi engine coolant temperature sensors are top-quality, direct fit OE replacements, which are designed to eliminate connection and failure points. With a one-piece, lead-frame design from the sensing tip to the connector terminals, these units equip your vehicle with a proven design that's built to last. They put the engine under fuel control operation quicker and reduce harmful cold-start emissions by 40 to 50 percent. Delphi engine coolant temperature sensors are built to last, even under the toughest conditions, to endure the long haul. Improve reliability, durability and fuel economy with Delphi.
( 17 )
$10.99
—
$19.99
Standard Motor knock sensor harnesses are quality-engineered replacement parts for frayed or cracked knock sensor wiring harnesses. These direct-fit replacements ensure ease of installation, and their high-temperature wiring withstands elevated underhood temperatures. Standard Motor knock sensor harnesses meet or exceed OE performance, providing today's technician with the quality parts needed to get the job done right, the first time.
Not Yet Reviewed
$18.99
FAST TPS adapter harnesses relay throttle opening/closing information to the system's ECU by plugging into the throttle blade shaft. They're made of high-resistance material and have a rotator for accurate throttle position measurement. Models are available for Chevy LS or early-to-late GM TPS applications.
( 6 )
$18.95
Dorman knock sensor grommets provide an easy solution for a high-failure prone grommet. A properly functioning knock sensor seal is critical to the life and function of the sensor, as failure can cause poor running conditions and CEL. These knock sensor grommets provide a reliable seal to prevent oil from exiting the engine block, contaminating the sensor and damaging surrounding components. This quality replacement part has been thoroughly tested to meet product standards to ensure a longer service life of the part.
( 1 )
$10.99
ICT Billet LS crankshaft and camshaft sensors bolt kits facilitate installation—or update aging hardware during maintenance. These complete kits include one 6mm bolt and four 8mm fasteners for various GM LS applications.
Not Yet Reviewed
$17.99
Motorcraft oil pressure switches will fix your jumpy gauge and prevent misreadings. Without the proper amount of oil, your engine will experience a lot of damage. If the oil light blinks or comes on, but the oil levels in the engine are fine, then a faulty oil pressure sensor may be to blame. Replace your faulty switch with genuine Motorcraft equipment, designed for durability and electrical performance.
( 12 )
$21.99
Bosch knock sensors are designed to help your computer monitor your engine's performance. They are manufactured from quality materials and fit in the stock location. They are available for a variety of engines and vehicles.
( 2 )
$13.99
—
$21.99
Standard T-Series is a competitively priced line containing some of the most popular part numbers to help you meet your needs. Its offerings represent two-thirds of the total engine management line and the parts are an ideal fit whenever a commercially acceptable product is called for. Standard Motor T-Series air charge temperature sensors (ACT, also referred to as MAT or IAT) measure the air temperature entering the engine and sends this information to your vehicle's PCM. They offer high-quality materials to ensure durability, a direct-fit replacement for ease of installation, and testing for performance and reliability. Choose the value and quality of Standard's T-Series to service your vehicle.
Not Yet Reviewed
$16.99
Summit Bucks
Delphi ignition knock sensors maximize your engine's performance--regardless of fuel quality! Their knock sensors hear various knock frequencies under many operating conditions to detect shifts and provide an accurate signal to your engine control module. The sensors meet or exceed OE requirements and reduce potential damage to your internal engine components. Knock, knock-- who's there? Engine. Engine who? Engine gonna buy me a Delphi ignition knock sensor? Listen to your engine--choose Delphi.
( 29 )
$15.99
—
$20.99
Don't take chances with old, questionable, or faulty intake air temperature sensors that can send misleading information to you and your vehicle's computer. Standard Motor Products offers replacements designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These intake air temperature sensors are available for a wide range of makes and models, and some units also include a wiring harness. Trust your vehicle's electrical system needs to Standard Motor Performance.
( 11 )
$10.99
—
$18.99
Standard Motor Products replacement throttle position sensors help you get maximum fuel efficiency and power from your engine. A properly operating accurate throttle position sensor is an essential component to helping your vehicle run flawlessly. The throttle position sensors transform the throttle position into output voltage and emit the voltage signal to your vehicle's computer. In addition, the sensors detect the opening and closing speed of the throttle valve and feed the voltage signal to the vehicle's computer. The computer receiving the signal from the throttle position sensor determines optimum engine operating conditions for idle control, fuel enrichment, and fuel cut. Replace your vehicle's worn or malfunctioning throttle position sensor with one of these reliable Standard Motor Products replacement TPS sensors.
( 36 )
$20.99
The coolant temperature sensor, also known as the coolant temperature switch, is an engine management system sensor used to monitor the engine coolant's temperature. Because temperature play a vital role in engine performance, a problem with your coolant sensor could quickly translate into engine issues. Holstein Parts coolant temperature sensors contain only the highest quality materials and engineering for parts that are truly built to match or exceed the OE part. And they offer superior coverage for domestic and import applications.
Not Yet Reviewed
$10.99
—
$20.99
Keeping your engine cool is a big deal. Standard coolant temperature sensors offer fit and function to meet or exceed OE specifications for the peak operating performance of your vehicle's engine. Many functions of your vehicle depend on its coolant temperature sensor, so Standard sensors are 100 percent factory-tested to ensure trouble-free performance and extended service life. Do you have a check engine light? Replace corroded coolant temperature sensors with new ones from Standard Motor Products.
( 9 )
$11.99
—
$17.99
Dorman ABS speed sensors are designed to supply information regarding wheel speed to the ABS computer. One of the most common omissions in maintaining a modern anti-lock brake system (ABS) is checking out the speed sensors. They are often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again.
( 36 )
$16.99
—
$19.99
Holstein Parts ABS sensor line has superior coverage for domestic and import applications. Anti-lock Braking, ABS Systems allows the driver to maintain control of the car in an emergency braking situation. The ABS system relies on sensors to monitor the wheel's speed and communicate with the ABS computer to ensure ideal performance. The data from the ABS sensor then allows the computer to balance the speed of each wheel to prevent the brakes from locking up and avoiding dangerous skidding situations. Holstein Parts focuses on using only the highest quality materials for their products, all parts are manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part.
( 3 )
$10.99
—
$21.99
Keep track of your vehicle's oil level with these replacement Standard Motor engine oil level sensors. They are made to meet or exceed OEM specifications and are available for a variety of applications.
( 1 )
$14.99
Having difficulty starting in cold weather? We're referring to your car, not you. Or, maybe you're seeing readings of overheating when all is normal. If your engine is giving questionable temperature readings or having trouble starting or running, you may need a new Beck/Arnley engine coolant temperature sensor. These quality-made sensors will signal your car's computer with the correct operating temperature to get the right amount of air and fuel flowing. Replace corroded sensors with Beck/Arnley engine coolant temperature sensors.
( 2 )
$13.99
—
$22.99
Standard Motor Products T-Series replacement coolant temperature sensors are designed to meet the original equipment form, fit, and function. How well your vehicle performs depends on its coolant temperature sensor, so Standard T-Series sensors are manufactured from high-quality materials for dependability. If your check engine light is on, it could be to a faulty coolant temperature sensor. If that's the case, simply replace the worn, corroded coolant temperature sensor with a new ones from Standard Motor Products.
( 1 )
$11.99
Brembo offers brake pad wear sensors for a wide range of vehicles—including many BMW, Audi, Porsche, Volkswagen, Mercedes-Benz, Mini Cooper, Jaguar, and Land Rover models. These stock replacements are made from original materials and designed to factory specs to ensure proper fitment and performance. Order the sensors recommended for your application.
( 1 )
$10.13
—
$21.42
Modal Header