Availability
On Sale
Summit Racing™ Performance LS7 hydraulic roller lifters are a definite upgrade over stock originals. Designed for high horsepower engines that demand increased oiling and higher-rpm capabilities, these replacement lifters will fit in SBC roller engines, as well as LS-based engines without active fuel management (AFM/DOD). Beat the competition to the finish line with Summit Racing™ Performance LS7 hydraulic lifters!
( 19 )
$229.99
$204.99
On Sale
Summit Racing™ LS lifter and guide kits offer top-quality, precision-made pieces at an excellent value! These kits include a set of roller lifters, lifter guide bolts, and LS2 lifter guides.
( 41 )
$265.98
$240.98
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 55 )
$204.99
—
$257.99
$199.99
—
$242.99
On Sale
You won't find a better quality cam for your LS-based engine than our Summit Racing™ Pro LS series of cams. These convenient combo kits enable you to get the cam along with the correct matching lifters. Pro LS cam, lifters, and trays are included in one easy-to-order part number. Whether for street/strip, turbocharged, or racing use, you'll find the kit recommended for your year/make and engine application.
( 4 )
$551.82
—
$600.57
$540.97
—
$590.97
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 29 )
$349.99
—
$429.99
$249.99
—
$329.99
On Sale
Replace your old and generic looking valve covers with a new pair of Pro LS valve covers from Summit Racing Equipment®. These cast aluminum valve covers are available in a variety of styles, height profiles, and finishes to dress up your engine bay.
( 33 )
$238.99
$214.99
On Sale
Summit Racing™ Pro Hemi Non-MDS swap camshafts are made from high-quality bearing steel cores. They are precision ground and finished on modern CNC grinders to provide you with a premium replacement cam. Choose the model that fits your engine and make sure to use with Non-MDS lifters.
( 1 )
$349.99
$299.99
On Sale
Summit Racing™ forged crankshafts offer maximum strength and the best value for your dollar! Our crankshafts are non-twist forged from certified 4340 steel. They are put through several stages of heat-treatment, and then stress-relieved and shot-peened to provide the strength and reliability you demand for your high performance application. Each journal is micro-polished and a .125 in. radius is used for increased strength. Summit Racing™ forged crankshafts help you get the most in value and performance.
( 10 )
$1,019.99
$949.99
On Sale
Summit Racing™ Pro LS T6 single and twin turbo cams have increased overlap from the standard turbo cams to take advantage of the better turbine housing flow. As a result, these cams will increase RPM and work with larger cubic inches better in race applications where an open front exit exhaust is utilized.
Not Yet Reviewed
$349.99
$299.99
On Sale
Our Summit Racing™ LS CNC billet intake manifolds look great and are made to take whatever you can throw at them. They are capable of handling 2,000 horsepower and over 300 psi of boost! Their plenums and bolt-on runners are CNC machined billet aluminum and will not distort or warp under boost. These intakes can accept up to 102mm throttle bodies and include hardware, gaskets, and an -8 AN fuel rail kit.
Not Yet Reviewed
$2,399.99
$1,999.99
On Sale
Wanting to deactivate the Multi-Displacement System of your Hemi vehicle will require a few things, including a non-MDS camshaft and components. Summit Racing™ Gen III Hemi MDS delete kits are offered in versions designed for engines with or without Variable Valve Timing (VVT). They contain premium components (except programmer) to help you complete the job. Each Summit Racing™ delete kit will include a head gasket set, timing cover gasket, non-MDS lifters, replacement cylinder head fasteners, non-MDS solenoid plug, and camshaft, along with valve springs and/or camshaft phaser limiters. Choose the combo designed for your vehicle.
Not Yet Reviewed
$1,287.90
$1,237.90
On Sale
Summit Racing™ Pro LS camshaft and spring kits are designed for GM LS engines. Each cam kit offers a budget-friendly option without sacrificing quality and performance. They're available in Stage 1 or 2 performance configurations. Stage 1 kits include the cam and matching drop in beehive springs with seals or optional upgraded dual spring and retainer kit. Stage 2 kits give you an additional cam change gasket kit and a crank bolt. Order the Summit Racing™ Pro LS camshaft kit recommended for your year/make and engine application.
( 37 )
$584.96
—
$766.95
$534.96
—
$716.95
On Sale
Summit Racing™ Mockup Replica Blocks are light-weight and ship disassembled for ease of shipping and storage. The individual panels are easily assembled with tabs and slots for superior rigidity and accuracy compared to bolt-together types. Steel resists the heat from welding, so custom motor-mounts can be fabricated right on the block.
( 10 )
$399.99
$349.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
