Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
2004 PONTIAC GTO Parts and Accessories
Showing In Stock Items. Show All 327 Items.
Melling Performance Oil Pumps
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 197 )
$125.99
—
$201.99
Powermaster XS Torque Starters
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 910 )
$249.99
Melling High-Volume Oil Pumps
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 364 )
$110.99
Clevite H-Series Main Bearings
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 141 )
$123.99
—
$163.99
ACDelco GM Genuine Parts Engine Timing Covers
ACDelco GM Genuine Parts engine timing covers are OE replacements for a variety of applications. The aluminum covers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. The timing cover is an essential component designed to protect the timing belt, timing chain or cam belt of your car from road debris, grime and gravel; timing belts or chains control the rotation of the camshafts and crankshaft in the internal combustion engine. Order the cover recommended for your vehicle.
( 3 )
$118.99
King XP-Series Main Bearings
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 44 )
$119.99
—
$138.99
On Sale
MSD 8.5mm Super Conductor Spark Plug Wire Sets
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1993 )
$120.95
—
$269.95
$108.85
—
$242.95
ACDelco Mechanical Water Pumps
ACDelco mechanical pumps are ideal replacement components for many vehicles on the road today. They're manufactured to meet and exceed OE specifications for fit and performance. The pumps are available in many styles, materials, and other options. Order the model recommended for your application. Features and benefits include: * Available for practically all GM vehicles as well as a wide range of non-GM vehicles * Completely pressure-tested for reliable, leak-free performance * Coated seals support seal longevity and durability * Heat-treated shaft assemblies and impellers provide superior strength and durability * High-quality bearings are permanently sealed and lubricated for greater durability and long life * Uniform wall sections and smooth coolant-flow cavities for efficient operation * Cast iron, aluminum, or steel design, depending on vehicle
( 462 )
$155.99
Manufacturer Rebate
Mickey Thompson Street Comp Tires
These Mickey Thompson Street Comp tires are ultra-high performance tires designed for street use. They provide incredible traction, crisp handling, and high-speed cornering ability. The tires also feature the outstanding appearance you've come to expect from Mickey Thompson. They use an asymmetrical tread design to offer superior wet and dry performance, while providing crisp and tight steering response. Mickey Thompson Street Comp tires feature smooth, easy-to-clean sidewalls, so you can keep your ride looking good all the time.
( 286 )
$188.99
Fel-Pro Conversion Set Gaskets
Fel-Pro conversion set gaskets are ideal for stock rebuilds or street-driven cars and trucks. They include every seal necessary for lower engine work. When combined with a Fel-Pro head set, conversion sets can be used for a complete overhaul. Order the gaskets designed for fitment with your engine type and designation.
( 84 )
$154.99
PRW Black Label Special Edition Flexplates
Introducing the Black Label Special Edition flexplates—the newest addition to PRW's flexplate lineup that meet the SFI 29.1 specification, which is a significant improvement over the OEM flexplates. The Black Label Special Edition Series flexplates are available for most Chevy, Ford, and Hemi applications. All of these applications conform to all published SFI standards, with the added benefits to the racing and performance builder that is looking for and demands the best in quality and engineering. Choose the model designed for your application needs. Key features: * Exceeds SFI Specification 29.1 * Perfect for road racing and lighter vehicles * Several fitment options for early-to-later model transmission swaps * Compatible with most aftermarket racing and high-performance torque converter bolt patterns
( 6 )
$132.36
Lokar Midnight Series Flexible Braided Stainless Transmission Dipsticks
Lokar's Midnight Series flexible braided stainless transmission dipsticks feature a heat-resistant PTFE rod with a black braided stainless steel cover. The flexible inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting them inside of the headers. They're available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length recommended for your transmission application.
( 80 )
$151.95
—
$176.95
Summit Racing™ Bracket Racer SFI Harmonic Dampers
You don't have to sacrifice safety or quality to save money; our affordable Summit Racing™ bracket racer SFI dampers have been spin-tested to 12,500 rpm and carry an SFI-18.1 rating. The carbon steel dampers have an injection-molded and bonded elastomer, easy-to-read engraved timing marks, removable counterweights (where applicable), and a highly polished baked-enamel finish, so they look as good as they perform.
( 394 )
$203.99
—
$217.99
Mahle Original Engine Conversion Gasket Sets
Mahle sealing products are trusted by OEMs and technicians around the globe. They are the leaders in domestic, Asian, and European applications. Mahle engine conversion gasket sets offer the right sealing performance for your project. These kits are precision-cut and contain the correct selection of gaskets and seals needed. Some kits may include RTV for upper and lower pan gaskets. Need a full set? Just add one of Mahle's head sets and you will have everything you need. Features include: * Meet or exceed the original equipment specifications * Utilize OE equivalent or better materials * Packaged in a shrink-wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
( 13 )
$156.99
—
$169.99
Nitto NT 555 G2 Tires
Pilot your muscle car down high-speed straightaways and through tight twisty curves with confidence when it's equipped with Nitto NT 555 G2 tires! These ultra-high performance tires are designed for use on vehicles such as the 2005 and newer Mustangs. The NT 555 G2s feature a specialized bonding agent that helps create a tire with a higher compound stiffness—which results in better cornering performance in both wet and dry conditions. Their directional tread pattern (with twin center ribs and larger tapered tread blocks) offers excellent dry traction, as well as increased cornering and straight-line stability. The reinforced shoulder tread blocks help to improve both wet and dry cornering grip. Order a set of Nitto NT 555 G2 tires—designed with the performance driver in mind!
( 176 )
$178.00
PRW Gold Series Flexplates
PRW Gold Series flexplates are engineered to handle extreme duty applications and designed to endure the punishment of modern high horsepower engines. The 4mm thick centerplate provides a solid foundation for these direct bolt-on drivetrain components. Ring gears are precision double-welded, utilizing robotic machinery and cold-welding processes for added durability. These flexplates are rigorously inspected throughout the manufacturing cycle to ensure you receive the expected quality. They are available in a wide variety of configurations to precisely match your application. Raise the bar on your high performance vehicle with PRW Gold Series flexplates. Order the style recommended for your specific vehicle and engine size. Features and specs: * Designed to fit standard OEM, aftermarket replacement, and high performance torque converters * SFI 29.1 certified * Forged one-piece steel ring gears * 0.035 in. thicker than stock flexplates * Constructed from cold-rolled chromoly steel * Long lasting yellow zinc plated finish
( 48 )
$103.18
—
$120.17
On Sale
Mr. Gasket Automatic Transmission Oil Pans
These automatic transmission oil pans from Mr. Gasket are stock-depth chrome plated pans. They come complete with a washer and gasket and most have drain plugs.
( 94 )
$129.95
$116.95
Chevrolet Performance Oil Pumps
Chevrolet Performance oil pumps are offered for an extensive range of cars, trucks, vans, and SUVs. Made from high-quality materials by a name you trust, they're available in both wet and dry sump styles, as well as standard and high-volume. Order the oil pump model designed for fitment on your vehicle application.
( 9 )
$132.99
Hinson Motorsports Engine Mounts
Hinson Motorsports engine mounts are an improvement over your stock rubber mounts for improved throttle response and reduced driveline movement. These urethane engine mounts have been tuned for both street and track applications and are designed for a great balance between control and vibrations. They offer an easy installation, and their interlocking stainless steel construction supports the large quantity of urethane for a giving, but secure ride without the high NVH levels of other designs.
( 17 )
$208.65
King HP-Series Main Bearings
King HP-Series main bearings are recommended for street and strip performance applications. They're designed for blown, turbocharged, NOS, and alcohol-fueled engines using aftermarket crankshafts. These main bearings have greater eccentricity for superior oiling at high rpm, and a chamfered surface for large radii crankshafts. HP-Series bearings also feature large, chamfered oil holes—and are available in 1/2 grooving for improved oiling to withstand high-rpm applications. Order the bearings designed for fitment with your specific engine.
( 48 )
$109.99
—
$135.99
Delphi Idle Air Control Valves
Add Delphi fuel injection idle air control valves to control the airflow into your engine. Delphi OE replacement valves provide a superior fit and finish that result in an easier installation for you. Their idle air control valves meet federal emissions regulations, increase your fuel efficiency, and eliminate the potential for malfunctions. Get control over the amount of air allowed to flow into your engine, and your engine idle speed, in a variety of load conditions when you replace your air control valves with Delphi fuel injection idle air control valves.
( 36 )
$109.99
Cloyes Race Billet True Roller Timing Sets
Cloyes Race Billet True Roller timing sets provide race-ready performance! These sets feature sprockets machined from premium billet steel on state-of-the-art CNC equipment to ensure the highest quality and consistency. The sprockets are induction-hardened and oil-quenched by Cloyes' in-house, multi-stage heat treat process. Sets include a Cloyes Premium True Roller chain—which features full roller action and superior strength. Side plates are cut and shaved from high-strength steel and are heat-treated for maximum fatigue resistance. Their .250 in. rollers are cold-rolled and hardened to exacting standards, increasing load and rpm capabilities. Cloyes Race Billet True Roller Speed Sets are offered with a choice of 3-or 9-keyway crank sprockets, providing multiple valve timing settings. These sets are hand-matched to qualify center distance and runout, ensuring the best performance with every set!
( 100 )
$154.99
—
$237.99
On Sale
Hays Heavy-Duty Flexplates
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$210.95
$189.85
Lokar Speedometer Cables
Lokar premium speedometer cables feature PTFE-lined housings with machined aluminum fittings. The inner and outer housings are designed to be cut-to-fit, so they can be tailored to your needs. These kits come complete with all fittings. They're compatible with any cable-driven aftermarket speedometers, or factory speedometers with a 5/8 in.-18 male thread. Order the model recommended for your transmission application.
( 71 )
$129.95
—
$205.95
