Availability
Showing In Stock Items. Show All 910 Items.
ACDelco offers rear main seal housings for a wide range of year/make and engine applications. The one-piece aluminum replacements are designed, engineered, tested, and backed by General Motors. They are validated OE parts for specific Chevrolet, Buick, GMC, and Cadillac vehicles. These components are designed to give the engine oil leak protection from between the crankshaft output flange and the engine block. Order the engine crankshaft seal housing recommended for your ride.
( 7 )
$66.99
—
$90.99
ACDelco GM Genuine Parts knock sensors are the GM recommended replacement for the vehicles original component. They monitor the engine for pinging or spark knock. The sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion. The engine control module then uses that signal to adjust the ignition timing and air/fuel mixture. These GM Genuine Parts knock sensors have been manufactured to fit your GM vehicle, providing you with the same performance, durability, and service life you have come to expect from General Motors.
( 104 )
$63.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 68 )
$69.99
—
$109.99
Summit Bucks
The chain of command between a crankshaft, camshaft, and engine valves is central to your vehicle's basic movement—which is why it's so important to protect the timing belt. Fel-Pro timing cover gaskets provide a tight seal to keep contaminants out of the gear shaft area. They're offered in hundreds of single or multi-piece sets for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs; gaskets for industrial use are also available. Ideal for stock replacement (not intended for racing applications), Fel-Pro gaskets are made from materials such as fiber, cork, and rubber. Choose the kit which corresponds to your year/make and engine application.
( 544 )
$50.99
Belltech Street Performance twin-tube shocks set the standard in performance handling for sport trucks. Their low-speed compression characteristics help to control pitch and roll, while their progressive rebound tuning allows you to use large aftermarket wheels and still have a smooth, firm ride. Get the performance and quality that you're looking for when you order the Belltech Street Performance shock models designed for your application. Other features may include (application dependent): * Oversized galvanized steel shock bodies with steel dust covers * Sturdy 35mm valves and 15mm or 18mm piston rods * Available vehicle-specific or adjustable damping tunes * Progressive-rate polymer bump stops
( 501 )
$79.95
Featuring a completely new design, Belltech Nitro Drop 2 shocks bring a high performance blend of internal valve technology and state-of-the-art construction to your vehicle. They feature a cavitation-free valve assembly that prevents air from decreasing the shocks' effectiveness. These Belltech Nitro Drop 2 shocks include dust boots and have OEM-style rubber bushings to offer a smooth, comfortable ride.
( 341 )
$65.00
Hayden Rapid-Cool transmission oil coolers take the heat, so your vehicle won't! Over 14-million transmissions fail every year, and 9 out of 10 are from overheating. Rapid-Cool's unique plate and fin design combines cooling expertise and space efficiency; multiple sizes are available. Their patented internal turbulation provides better heat transfer. Lower your operating temps with a pioneer in cooling: Hayden!
( 159 )
$52.99
—
$61.99
Is your check engine light on and vehicle running rough? Could be a failed knock sensor. Dorman knock sensor kits combine the necessary sensor and wiring harness that joins them for a complete repair in one package. Features include: * Plug-and-play installation--matches original wiring harness, requiring no cutting or splicing * Quality assured--benchmarked against original components for performance and quality * Excellent value--original equipment quality at significant cost savings
( 20 )
$77.95
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 314 )
$53.99
—
$68.99
ACDelco GM Genuine Parts oil pan gaskets are genuine parts that will provide the same performance, durability, and service life as the factory originals. Choosing the best quality to maintain your GM vehicle is easy--ACDelco GM Genuine Parts has the right fit, function, and form for confident, hassle-free service.
( 4 )
$54.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$83.99
—
$94.99
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 546 )
$87.95
—
$92.35
Bilstein B6 4600 Series shocks and struts are designed to help your truck, van, or SUV reach its pinnacle in performance and handling, while still providing a comfortable, stable ride. Compared to conventional alternatives, these suspension parts offer superior control—using patented designs and dampening technology developed and tested in the real world. Order the model best suited for fitment on your vehicle.
( 1435 )
$85.99
—
$89.00
These Sealed Power MA Series main bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank whose surface hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better control of wall variance. It also helps to minimize debris embedding, which can score the crank's surface.
( 76 )
$92.99
—
$157.99
Chevrolet Performance composition head gaskets are recommended for stock and mildly modified engines. They're available in a variety of bores, compressed thicknesses, and volumes for fitment on specific vehicle and engine applications.
( 119 )
$63.99
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 36 )
$66.99
—
$108.99
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 53 )
$64.99
—
$89.99
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 135 )
$51.99
—
$81.99
Bilstein B8 5100 Series shocks feature a monotube design for cooler, more efficient operation and longer life. They have the largest available piston diameter, providing superior handling and performance. The shocks' patented digressive valving instantly reacts to changing surface conditions for maximum comfort and control—on and off the road. These shocks also have split compression and rebound valving tuned for each specific application. Order the model designed for your year/make/model. Additional features: * 2 in. seamless extruded tube * 14mm centerless-ground, case-hardened, chromed, and super-polished rod * 46mm Bilstein digressive piston * Self-adjusting, deflective-disc independent rebound and compression
( 1400 )
$104.99
Sealed Power Performance piston rings are made from ductile iron, and compression rings are available with moly, chrome, and plasma-moly facings for extra durability. These OE-quality sets will seal mild- to high-compression engines and help protect against oil blowby. They feature standard ring end gaps for easy installation. Find the bore dimension and ring thicknesses needed for your application.
( 318 )
$60.99
—
$118.99
With Summit Racing™ branded, all-100 percent silicone 8mm constructed wire, a 300 ohm per foot wire-wound EMI suppression core, high-heat silicone boots, and stainless steel and brass terminals, you get all the high-end features a wire set can offer, without breaking the bank! * Dual silicone high tear-resistant jacketing with fiberglass matting gives you the highest heat protection and superior terminal pull-off values in the business * Our 300 ohm per foot wire-wound magnetic suppression core maximizes the voltage output of your ignition system, while maintaining high EMI resistance values * Stainless steel terminals with posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery * Ultra-high heat silicone spark plug boots provide superior radiant heat protection -- High dielectric strength properties virtually eliminate voltage leakage and blow through Installing our Summit Racing™ high-end 8mm sets will give you the confidence, reliability, and performance you expect from Summit Racing™ products.
( 1012 )
$55.99
—
$57.99
Common symptoms of poor intake manifold gasket sealing may include leaks, rough idling, and stumbling. For your next engine build, use Mahle Original intake manifold gaskets to seal your engine up tight! It's a known fact—proper sealing is vital to create maximum horsepower within the engine, and these gaskets will allow you to achieve a good, positive seal. They utilize premium materials and are precisely designed to match OE quality, fit, form, and function. Order the intake manifold gasket designed for fitment on your particular vehicle by Mahle Original, one of the most trusted names in professional sealing solutions for engines and exhaust.
( 99 )
$53.99
—
$89.99
Use Dorman engine rear main seal covers to ensure the proper sealing of your engine, to stop and/or prevent engine oil leakage. They are made from high-quality materials and are available as direct replacements for a proper fit on various makes and models. Whatever your repair needs, Dorman has just what you're after!
( 10 )
$53.95
Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets deliver maximum power output. Engineered for high performance engines that need all the voltage they can get, Max-Fire wires are constructed of leads that transport a low 50 ohms of resistance per ft. for maximum EMI/RFI noise suppression. Each Ultra-Spark starts with a spiral wound Ferro-magnetic KEVLAR® core wrapped with a suppression layer, stainless steel conductive winding, and a latex silicone layer. This is followed by an EPDM inner insulation topped with braid tape and a tempered 8.5mm silicone outer jacket that won't crack or shrink, and is resistant to chemicals. The wires are finished with silicone plug boots featuring high-quality snap and lock-style terminals for easy installation. Give your engine the most power possible with Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets.
( 51 )
$85.95
—
$106.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
