Availability
Showing In Stock Items. Show All 162 Items.
Magnuson supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. This technology recalibrates the engine and transmission control programs to work with the altered induction path and boost pressure of the supercharger. And that produces a seamless and consistent delivery of power over the entire rpm range--not just the high end! For you, that means Magnuson superchargers will boost your power output, and yet run like their factory installed units. Whether you're driving a Corvette or a Cadillac, a Silverado or a Hummer, or a Camaro or a Mustang, Magnuson supercharger kits deliver maximum performance!
( 12 )
$7,395.00
Fleece Performance Cheetah Holset turbochargers are 100 percent drop-in, bolt-on, and enjoy big top-end power units. These turbos provide quick and smooth throttle response, lower EGT's, and stock-like spooling with 40 to 45 psi operating range. They use a high-flow turbine wheel and Fleece's 63mm billet compressor wheel in order to support up to 650 rwhp. Give your diesel truck the kind of bolt-on performance most vehicles only dream of—with Fleece Performance Cheetah Holset turbochargers!
( 3 )
$1,847.50
Fleece Performance offers Cheetah FMW VNT turbochargers for a variety of diesel trucks to enhance your driving experience. These drop-in replacements come with a Fleece-engineered 63mm FMW compressor wheel and high-flow Cheetah turbine wheel. You'll enjoy the spool-up and throttle response of a small turbo and still get the big top-end power you're looking for. Rated at up to 650 rear wheel horsepower (depending on model), this is the ultimate combination for dual-purpose applications. If you're towing during the week and sled pulling on the weekend, the 63mm FMW VNT Cheetah is just the ticket. Order the turbo model recommended for your vehicle. Additional details: * Stock appearing: Uses the stock housings with updated internals. This allows you to keep all factory systems intact, yet enables you to safely run 40 psi of boost. No aftermarket components or modifications needed for installation. * Proven Technology: Built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings. * Powerful Yet Responsive: Turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end. * Exclusive FMW wheel technology: – Forged milled wheels – Faster spool-up – Increased throttle response – Broader torque curve
( 2 )
$1,779.00
—
$2,599.00
Clearance
CSF intercoolers are a complete, full line of intercoolers--with coverage ranging from Audi to Volvo. Several different styles are available, including plastic-aluminum and all-aluminum, with standard tube and fin cores as well as heavy-duty bar and plate cores. CSF OE-replacement intercoolers provide a drop-in fit requiring no modifications. All CSF intercoolers are built to OE specifications, and incorporate the same high-quality and value that CSF has been known for and has represented in the industry for decades.
( 18 )
$139.99
—
$367.99
ZZPerformance offers high-output intercooler pumps for a variety of vehicles, including many Chevrolet and Saturn cars from the early 2000s and up. Based on the popular Bosch design, the ZZP pumps are a direct replacement/upgrade to your existing Bosch pump. They will work in any application the Bosch does—and offer improved flow over the Bosch. These intercooler pumps use the same EV1 power connector. * Specs for Model ZZ-ICP-S1: --- Flow: 35 liters per minute at 12 V / 50 watts --- Max draw: 85 watts at 14.4 V – 38 lpm --- Max continuous volts: 14.4 V --- Max fluid temperature: 190 degrees F --- 3/4 in. inlet and outlet
Not Yet Reviewed
$129.99
On Sale
Fluidyne heat exchangers and intercoolers are designed to keep your turbocharged or supercharged engine working at optimum levels. A cooler intake charge means more power from your engine. These units are made from aluminum and precision-welded for maximum efficiency and durability. The coolers use mounting tabs welded to the outer case for a simple installation. Order the size or model recommended for your application.
( 9 )
$467.00
—
$561.00
$373.60
—
$448.80
Turbosmart Kompact dual port blow-off valves offer high performance, OEM fitment, versatility, and affordability—in other words, everything you need! These BOVs feature dual ports that vent into both the atmosphere and the air intake, reducing turbo lag and eliminating cavitation. Turbosmart Kompact dual port blow-off valves are designed to be bolt-on replacements for plastic factory Bosch or Denso units. They use sequential timing to allow for quieter operation during normal driving, while still providing the benefits of a vent-to-atmosphere type BOV under race conditions. They are easily converted into full atmospheric or full bypass units by using the included port blanking plug.
( 27 )
$207.95
—
$303.95
The G-Force III is the latest iteration of Go Fast Bits' feature-packed electronic boost controller—now with the ability to monitor and display your engine's air/fuel ratio in either Lambda or AFR. By connecting the analog output of most wideband oxygen controllers (i.e. Innovate LC-2, AEM UEGO etc.; sold separately) to the G-Force III's auxiliary input, you can toggle between boost pressure and air/fuel ratio display. This saves you from having to install a separate AFR gauge in your car, and it can also save your engine! A lean mixture at high boost can destroy an engine in seconds, and a stand-alone AFR gauge is next to useless when accelerating hard, as your concentration is likely to be on the road in front of you. The G-Force III safeguards your engine against a lean mixture by lowering boost to the minimum setting, and visibly warning you by flashing the display lighting. Whether your car is a daily driver or an all-out track weapon, the G-Force III has the features to tailor boost to suit your needs. Set up to six boost presets and select on the fly; use the scramble feature for overtaking, launching, towing, or protecting the engine—and you can even customize the lighting color to suit your interior! No other EBC on the market offers the features, control, ease of use, and value for money like the G-Force III! Additional G-Force III electronic boost controller details: * For boost pressures up to 50 psi (3.45 bar, 345 KPA) * Adjust peak boost, rise rate, and closed loop correction. * Display boost pressure in PSI, BAR, or KPA * 6 Boost presets, individually programmable * Unique "scramble" feature with remote switching * Peak boost recall * Air/fuel ratio display in AFR or Lambda (when connected to a wideband oxygen controller) * Separately adjustable overboost and lean mixture warning/boost cut * Touch buttons with user selectable illumination colors * Auxiliary input to switch boost presets or activate scramble * 1/2 DIN size casing, fits standard stereo slot * Supplied with MAC 3-port solenoid
( 1 )
$396.00
BD Diesel Screamer turbochargers may offer a stock drop-in installation and appearance, but they are anything but stock! They feature a larger ballistic billet compressor wheel and BD's exclusive turbine profile that results in reduced backpressure and increased turbine flow compared to the competition. You get more potential maximum power output, right up to 690 hp with performance modifications. Each turbocharger is high-speed balanced with the actuator stroke tested prior to shipping.
( 2 )
$1,681.95
—
$2,230.00
AFCO Racing heat exchangers are designed to replace your factory heat exchanger and provide more efficient intake cooling. They are made from aluminum, TIG-welded, and come in a natural finish, and feature enhanced fin technology for greater airflow. These heat exchangers are direct bolt-in applications that require no modifications to facilitate an easy installation.
( 4 )
$549.99
—
$799.99
Bosch offers intercooler water pumps for a variety of applications, including many Mercedes-Benz cars and trucks from the early 2000s and up. A faulty water pump is a common source of power loss on Mercedes supercharged motors. These upgraded 100 percent plug-and-play replacements exceed OEM standards and are used on all contemporary AMG vehicles. Select the pump recommended for your ride. All water pumps are tested to ensure proper functionality. Torque testing is performed to verify the proper impeller-shaft mating—and can also detect loose impeller-shaft press fits. The water pumps are vacuum leak tested to ensure proper sealing; this test can detect leaks throughout the housing, seals, tube binding and plug leakage. Bosch utilizes OE mating parts and accessories to verify proper fitment in situations where the isolator grommet and bracket can be re-used. Retain them when removing the previously installed pump.
Not Yet Reviewed
$141.99
Fleece Performance turbo oil feed lines ensure that your system gets an adequate oil supply. They offer replacements for your OE setup, as well as remote kits that prevent premature bearing failures. All include extra-flexible, smooth bore PTFE hose and high-quality fittings. The remote kits will also include a stock oil feed plug and an oil galley rifle fitting. Whether you're replacing or upgrading, Fleece Performance turbo oil feed lines are available for your application.
( 1 )
$69.99
—
$99.99
When installing a Fleece Performance S400 turbo with intercooler, you're going to need the proper adapters. These 90-degree discharge adapters include a clamp and O-ring to ensure you get the proper seal. Don't lose out on performance!
( 1 )
$60.00
S&B Filters intercooler boot kits provide your diesel with boots and clamps designed to never fail and are backed by a lifetime warranty—what more could you ask for? The boots are manufactured in house at S&B with 4-ply aramid reinforcement and extremely strong silicone rubber to last the lifetime of your vehicle. S&B also packages high-quality, stainless steel, spring-loaded T-bolt clamps with these kits, so you don't have to reuse any of your worn out original ones. S&B offers hot side, cold side, or complete kits with both. Never worry about buying another boot kit again. Purchase the S&B Filters intercooler boot kits designed for your diesel truck.
Not Yet Reviewed
$39.99
—
$149.00
Put the finishing touches on your truck with high-quality Fleece Performance turbo drain tube kits. The tubes are braided stainless steel for durability on the exterior, and reinforced with rubber tubing for flow and maximum flexibility. The kits contain everything you need to connect an S300/S400 turbo drain back to the factory drain location on the Cummins block when using a fixed vane geometry turbo. Kit contains: * Drain tube (20 in. end-to-end) * Cummins turbo drain tube adapter * Turbo drain flange adapter * Turbo drain gasket * 7/8 in.-14 to -10 AN fitting * Two 3/8in.-16 flange head bolts * Two 10mm x 1.5 flange head bolts
( 3 )
$99.95
Get the most out of your diesel truck performance with aFe BladeRunner intercooler pipes. The connecting arms are fully mandrel-bent stainless steel or aluminum tubing that will outflow factory pipes, giving you more power and fuel efficiency. The intercooler pipes free-flowing design aids in decreasing EGTs to help protect your motor from power-robbing heat. BladeRunner pipes are available for these positions: turbocharger-to-intercooler, intercooler-to-intake, and the complete system. The kits come complete with the hardware needed for installation, and a powdercoated finish protects pipes from the elements. Don't let your factory plumbing rob your diesel of power—upgrade with aFe BladeRunner intercooler pipes!
( 18 )
$261.45
—
$541.80
A damaged hose can deplete your engine's power. Dorman intercooler pipes are constructed from durable oil and heat-resistant material to withstand the intensely pressurized air of the turbo system. They are direct replacements for a proper fit every time. Their high-quality design ensures year after year of service.
( 6 )
$173.99
Magnuson intake manifold gaskets are high-quality gaskets designed to meet or exceed the quality of your factory gaskets. They are available for a wide variety of applications to meet your needs.
( 4 )
$62.00
Vortech supercharger systems for GM LS-Swaps operate at an even higher level of sophistication than any original equipment system. They're currently one of the most popular engine swap power plants in the world. In every application, the LS systems have established themselves to be fantastic platforms to swap into just about anything. They operate at an even higher level of sophistication, with a boost curve generated by Vortech's superchargers that are ideally matched with today's highly evolved engines and give you power when you need it. The supercharger and the technologically advanced subsystems fully integrate into the vehicle's existing platform, yielding a smooth continuity of power and performance.
( 3 )
$3,915.99
Feed your supercharger with Vortech oil feed assemblies. Designed for a perfect fit in several applications, these assemblies include an oil feed hose, crimp ferrules, and the necessary fittings to do the job. And Vortech's red hose and brass fittings look great under the hood.
( 10 )
$69.99
—
$129.99
The Hybrid valve is back! Go Fast Bits Hybrid dual outlet valves are three valves in one; full recirculation, full atmosphere, or 50/50 venting. In 1999, GFB's first Hybrid valve pioneered the dual port design, which was so successful, and the technology has since been adopted by most other brands. By "staging" the two venting outlets at low valve lifts most of the air is recirculated. As the car is driven harder, the valve opens further and more of the atmosphere venting port is exposed for a louder sound--a benefit that makes it possible to use these valves on cars with sensitive airflow meters that often suffer issues such as backfiring and/or stalling, whilst still achieving the signature blow-off sound. Go Fast Bits Hybrid dual outlet valves are direct-fit, bolt-ons with a range that covers a huge list of popular vehicles. Purchase the Hybrid model for your vehicle.
( 2 )
$225.00
Banks Power offers boost tubes for a variety of applications from 2001 and up. These kits are designed to give you greater cooling capacity. They're manufactured from quality materials to ensure performance and durability. Order the model recommended for your vehicle and engine application.
( 5 )
$189.00
Put the finishing touch on your truck by easily connecting the turbo to the factory drain location on your Cummins block with high quality Fleece Performance drain tube adapters.
( 3 )
$19.99
Change the oil in your supercharger the easy way with one of these Vortech supercharger oil drain assemblies. They include an adapter to thread into your supercharger drain port and a section of rubber hose to give you more clearance from the engine and avoid getting oil on other engine components.
Not Yet Reviewed
$69.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
