Availability
Showing In Stock Items. Show All 583 Items.
ACDelco GM Genuine Parts knock sensors are the GM recommended replacement for the vehicles original component. They monitor the engine for pinging or spark knock. The sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion. The engine control module then uses that signal to adjust the ignition timing and air/fuel mixture. These GM Genuine Parts knock sensors have been manufactured to fit your GM vehicle, providing you with the same performance, durability, and service life you have come to expect from General Motors.
( 107 )
$60.99
Match your camshaft with Summit Racing™ distributor gears. These small, durable replacement gears make a big impact on your engine's performance. They're available in a variety of materials and sizes for applications from the 1950s and up. Order the model recommended for your vehicle.
( 78 )
$77.99
ACDelco engine oil pressure indicator switches are quality replacement parts you can feel good about installing. They offer the fit, form, and function—along with value—you expect and want. ACDelco has a wide selection of components to optimize your GM vehicle's performance, as well as products to cover many other makes and models. Order the ACDelco oil pressure safety switch designed for your specific vehicle.
( 28 )
$50.99
high-quality MSD bronze distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This material creates high strength gear teeth which are less prone to wear when used with high volume oil pumps but does not harm the cam like steel or iron gears. With the proper cam and gear combination you'll be sure to have flawless, extended performance in the harshest conditions.
( 93 )
$91.59
Is your check engine light on and vehicle running rough? Could be a failed knock sensor. Dorman knock sensor kits combine the necessary sensor and wiring harness that joins them for a complete repair in one package. Features include: * Plug-and-play installation--matches original wiring harness, requiring no cutting or splicing * Quality assured--benchmarked against original components for performance and quality * Excellent value--original equipment quality at significant cost savings
( 21 )
$51.99
—
$60.99
Dragon Fire Street Series spark plug wire sets are specially designed to deliver higher performance over your factory OEM wires, while still maintaining the ability to be used as direct factory replacements. They feature a super-low-resistance conductor wrapped in a highly durable, double-layer EPDM/silicon sleeve. Using a high-dielectric strength copolymer compound, these wires eliminate voltage leaks and radio frequency interference (RFI). Get one of the best alternatives to higher priced wires for your vehicle with a specialized set of Dragon Fire 1000 Street Series spark plug wires. Features and specs: * OEM-style terminals * Full EMI/RFI suppression technology * 500 ohm resistance * 500 degrees F high-temperature silicon * OEM-style silicon or ceramic boot options * Available boot angles include: 90, 135, and 180 degrees * OEM-style stainless steel conductors * Military-grade aramid fiber core support * Assembled in ISO9001:2015 and ISO/TS 16949:2009 certified facilities under strict quality control to ensure each wire is crimped and assembled for strength and perfect fitment for life * Designed for off-road use only
( 40 )
$54.95
—
$79.95
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 371 )
$54.99
—
$72.99
MSD puts their years of experience to work in making these top-notch iron distributor gears. Their high grade, ductile iron is micro polished for a smooth and scuff-free finish then Melonite QPC coated to reduce friction and initial wear. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these oversized gears for tighter mesh between the camshaft and distributor drive gears.
( 60 )
$60.75
With Summit Racing™ branded, all-100 percent silicone 8mm constructed wire, a 300 ohm per foot wire-wound EMI suppression core, high-heat silicone boots, and stainless steel and brass terminals, you get all the high-end features a wire set can offer, without breaking the bank! * Dual silicone high tear-resistant jacketing with fiberglass matting gives you the highest heat protection and superior terminal pull-off values in the business * Our 300 ohm per foot wire-wound magnetic suppression core maximizes the voltage output of your ignition system, while maintaining high EMI resistance values * Stainless steel terminals with posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery * Ultra-high heat silicone spark plug boots provide superior radiant heat protection -- High dielectric strength properties virtually eliminate voltage leakage and blow through Installing our Summit Racing™ high-end 8mm sets will give you the confidence, reliability, and performance you expect from Summit Racing™ products.
( 1018 )
$55.99
—
$57.99
MSD Blaster coils give your GM maximum voltage output! With windings and construction similar to MSD's Blaster 2 coils, these have an increased turns ratio, plus lower primary resistance than your stock coils. The Blasters will work with stock GM coil ignition systems, as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your GM ignition system? Just bolt in one of these MSD Blaster Coils.
( 88 )
$80.09
Dragon Fire High Performance Series spark plug wire sets deliver industry-leading performance, quality craftsmanship, and long-term reliability. At the core of these wires is a strong Kevlar® center with a low-resistance spiral-wound alloy conductor, tightly wrapped for maximum spark energy transmission up to 80,000 VAC. A high dielectric strength co-polymer compound coating is applied to the conductor to help eliminate voltage leaks and Radio/Electromagnetic Frequency Interference (RFI/EMI). The conductor is fully insulated in a durable, extra-thick silicone and EPDM sleeve for superior protection. All terminals are protected by heavy-duty, extra-thick walled, high-temp silicone boots to ensure optimal spark delivery and long service life. Heat Rated to 600° F. Designed as a direct replacement set, these spark plug wires are heat-rated to 600 degrees F. Order the set recommended for fitment on your vehicle.
( 16 )
$59.95
ACDelco throttle position sensors electronically inform the powertrain control module (PCM) of the throttle valve angle. The PCM uses this input to regulate your fuel and ignition systems. These replacement sensors are available in dozens of models for fitment on thousands of vehicles spanning a half-century. For the proper fit and performance, order the ACDelco throttle position sensor recommended for your application.
( 21 )
$51.99
—
$54.99
ACDelco GM Genuine Parts manifold absolute pressure sensors measure the intake manifold pressure, and are GM-recommended replacements for your vehicle's original component. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. GM Genuine Parts manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 24 )
$66.99
—
$81.99
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 28 )
$53.99
—
$81.99
Bosch ignition coils are designed to provide your ignition system adequate spark to start it and keep it operating smoothly. They are manufactured from quality materials and are available in different styles to fit your specific vehicle application. All Bosch ignition coils are direct fit, so no modifications should be required.
( 3 )
$68.99
Engine knock is one of the most unwelcome problems to plague a vehicle. When your ignition timing becomes faulty, the results are felt unless corrected through a sensor. Chevrolet Performance knock sensor wiring harnesses should be used when replacing those key sensors, providing fresh OEM wiring and grommets. The harness units are available for over a hundred submodels from makers such as Chevrolet, GMC, Cadillac, Pontiac, Buick, and Hummer.
( 33 )
$64.99
Denso developed the auto industry's first compact stick-type ignition coil. The space-saving design of Denso ignition coils requires no high-tension ignition cables, fitting neatly into the engine's spark plug bore. Along with its stick coil technology, other advanced features include micro-sized driver circuits and diagonal inductive windings. That same expertise is put to use on all Denso ignition coils regardless of their configuration. Each Denso ignition coil is designed and optimized for its specific application, then continually improved by Denso's global engineering team. One key to effective combustion in today's low-emission, high-efficiency engines is consistent, high-energy ignition output. Denso direct ignition coils deliver it. Additional features and benefits of Denso ignition coils include: * Integrated driving circuit in the top of the coil * Superior-quality components and materials ensure optimal performance * Tested and inspected to ensure high quality * Diagonal windings eliminate sectioned bobbins, reducing size and weight * Improved coil efficiency lessens the need to generate high voltage * Eliminates phantom misfires * Small in size, light in weight, and easy to install * Provides maximum available voltage under all operating conditions
( 95 )
$50.99
—
$92.99
ACDelco GM Genuine Parts ignition coils are the true OE parts installed during production or validated by GM, for GM vehicles--designed, engineered, and tested to rigorous standards and backed by General Motors. They increase electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery's charge, and provides power to the electrical accessories while the engine is running. GM Genuine Parts ignition coil uses pure copper windings to improve durability and provide higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed.
( 8 )
$71.99
—
$74.99
ICT Billet remote mount coil brackets mount eight coils and are designed to work with a wide variety of LS engine swaps. They are available to fit most OE and some Holley EFI coils. Made from aerospace grade billet aluminum, most feature a natural finish. The kits include two sets of brackets, bolts, and spacers where applicable. They work great for turbo setups or whenever a clean-looking engine bay is important. Most ICT Billet remote mount coil brackets are designed to be used with LT1 Camaro ignition wires.
( 20 )
$61.99
—
$87.99
Delphi engine crankshaft position sensors exceed OE requirements and undergo certified electrical testing. They feature enhanced sensing functionality that delivers reduced emission, improved reliability, and superior drivability. Delphi engine crankshaft position sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. Choose Delphi for the OE replacement parts that your car was born with.
( 16 )
$51.99
—
$96.99
Top Street Performance premium ignition wires deliver superior performance and durability in various color themes to match your engine bay. Their spiral-wound core suppresses RFI (radio-frequency interference) and features excellent ohm-per-foot resistance. Around the core is a braid that provides superior pull strength, and the outer jacket is composed of premium high-density material with a high-temperature rating and a quality finish to resist damage from water and chemicals. Top Street Performance delivers quality performance with the premium spark plug wire sets designed and styled for your application.
( 5 )
$98.76
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$97.99
If you're swapping an LS Series engine into your street rod, musclecar, or classic car, you're going to need one of these Chevrolet Performance LS engine reluctor wheels. They are designed to fit late model Generation III/IV Chevrolet LS Series engines. The reluctor wheels are available in different tooth counts to accommodate your specific year and engine combination.
( 7 )
$62.52
Summit Racing™ LS ignition coil wiring harness extensions are assembled with OEM tooling, connectors, locks, seals, and terminals. They utilize factory harness wire colors. Compatible with any GM LS engine, these extensions are great for remote locating coils under the engine for a custom look. Don't take a chance with cheap wire connectors that use poor-quality components and have conductivity issues. Order the harness length needed for your application.
Not Yet Reviewed
$71.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
