Availability
Showing In Stock Items. Show All 636 Items.
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 62 )
$199.99
These Mickey Thompson Street Comp tires are ultra-high performance tires designed for street use. They provide incredible traction, crisp handling, and high-speed cornering ability. The tires also feature the outstanding appearance you've come to expect from Mickey Thompson. They use an asymmetrical tread design to offer superior wet and dry performance, while providing crisp and tight steering response. Mickey Thompson Street Comp tires feature smooth, easy-to-clean sidewalls, so you can keep your ride looking good all the time.
( 286 )
$188.99
Powermaster PowerMax Plus starters are rated with high cranking torque and feature an offset gear reduction for increased performance. Their mounting blocks are made from durable billet aluminum and can be rotated in four positions to fit multiple locations. PowerMax Plus starters are available in either a natural or chrome finish and contain a tested dyno report in every box!
( 200 )
$177.99
—
$190.99
Everything you drive will benefit from Red Line RL-600 brake fluid. Going fast is good, but reliable stopping is better—and the brake fluid you choose does make a difference. With a strong reputation for high performance, Red Line engineered this RL-600 brake fluid to maintain viscosity, lubricity, and compressibility at extreme temperatures, safeguarding against brake fade and vapor lock. It's formulated with a precise mixture of borate esters and glycol ethers, along with moisture and corrosion inhibitors. RL-600 is blendable with DOT 3, DOT 4, and DOT 5.1 fluids—plus, it increases ABS cycle times for a more responsive and consistent pedal feel. No matter if your vehicle has four wheels or two, or is used for racing or daily commutes, Red Line RL-600 brake fluid will help keep your stopping power at maximum levels.
( 5 )
$106.65
Ford Performance Parts ring and pinion sets are engineered, manufactured, and tested for maximum performance. These ring and pinion sets are finished in a black oxide coating for corrosion resistance, and are available in many different ratios to fit a variety of Ford differentials.
( 131 )
$190.99
—
$206.99
Have you ever wondered where you were going to put your oil filter? Doesn't it always seem to be in the way of other accessories? Not anymore with these handy Ford Performance Parts oil filter adapters. They simply screw into the block and rotate the filter toward the front of the engine to provide clearance for engine swaps and chassis modifications. The adapters are available in different models for use with over a thousand applications.
( 21 )
$154.99
Rust, rocks, and road debris all take part in destroying differential covers—so Spicer Drivetrain Products introduces a line of axle-specific replacements. These kits include a new cover, plug, and installation bolts for an all-new look. They're available in a variety of materials and finishes for high strength and good looks. The differential covers are offered for the front or rear with select options for your particular application.
( 99 )
$210.99
Stifflers Suspension weld-on subframe connectors are engineered to be stiff, lightweight, and easy to install. These full-length connectors are manufactured from 1.5 in. x 2 in. x .083 in. rectangular tubing. They are optimized using CAD/CAE software to provide the ultimate in stiffness, reduced weight, and maximized surface area between the subframe and connector. Stifflers subframe connectors feature crimped and welded tube ends to seal out moisture, while also increasing strength, and a laser-cut cross brace that reduces free span, reinforces the floor pan, and minimizes required welding during installation. All is given an industrial-grade powdercoat for long life. Welding areas are pre-masked, so no removal of powdercoat is needed before installation--a real time-saver!
( 10 )
$189.95
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 807 )
$299.95
$141.26
—
$222.95
MagnaFlow universal catalytic converters by Car Sound form the basic building blocks for many applications. The main benefit of universal catalytic converters is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting, and tube-bending equipment that is readily available to most professional installers. They are extremely well made, with features such as: * A ribbed body that minimizes expansion and distortion when the converter heats up. They form a channel that protects the cushioning mat from direct exposure to exhaust gasses, and hold the ceramic catalyst in proper alignment. * A 1/2 in. lap joint where the necks meet the body. The neck does not extend into the converter body, where it could hamper exhaust flow. * Manufactured with separate dies on different sized inlets. Putting larger neck sizes on smaller bodies would reduce the flow of the converter and the quality of the product. * A monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. * Seam-welded close to the converter body for a strong, tight bond. Welding along the edge could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around. * Heavier-gauge stainless steel, tip-to-tip. They do not use inferior mixed weights and materials. * An aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter.
( 187 )
$172.00
—
$202.00
Simplify your ring and pinion project. Ford Performance Parts ring and pinion installation kits include everything you need for changing your ring and pinion gear. All components are high-quality genuine Ford parts to ensure a hassle-free installation.
( 61 )
$136.99
Externally adjustable Mustang struts from Strange Engineering are designed to fit original-equipment applications, as well as most coilover kits. They are ideal for street/strip applications and feature 10 performance-adjusting rebound settings. These settings are quickly changed via an easily accessible, externally mounted adjuster knob, which allows you to take active control of your ride's firmness and comfort level.
( 29 )
$148.99
These Lokar Midnight Series billet window cranks are machined from billet aluminum and come available in beautiful black anodized finish. They feature a full 360 degree fine spline adjustment system, so there are no screws or visible attachment hardware.
( 6 )
$134.95
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 357 )
$120.99
Lokar's Hi-Tech flexible braided stainless transmission dipsticks match right up with other Lokar accessories. They feature a flexible, heat-resistant PTFE rod with a braided stainless steel cover. The inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting inside of the headers. These dipsticks are available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length and other options preferred for your vehicle make and transmission application.
( 337 )
$138.95
—
$176.95
Your Ford is built to eat asphalt and clear its pipes with compacts. Summit Racing™ Ford Mod Motor coil-on-plug ignition coils are engineered to fuel the powerful combustion needed to unleash its inner potential. We use pure copper wire, rare earth magnets, and a custom primary and secondary wind, to provide 40 percent more voltage and 20 percent more energy (mj) from a stock-sized coil housing. They fit in the stock location, making changing these coils as easy as possible. If you're running at increased PSI with a supercharger, turbocharger, nitrous, or are burning E85, you need the hottest and strongest spark possible to burn your fuel. With the increased voltage and energy output values, your cylinders will get the spark they need to maximize fuel burn! These ignition coils are available in a variety of power options; order the model recommended for your vehicle.
( 62 )
$159.99
—
$207.92
These Lokar Midnight Series interior door handles are made for street rods or other vehicles that need a finished-off look. They are made of billet aluminum, have a black anodized and have a smooth, flat, rounded shape. All mounting hardware and instructions are included.
( 7 )
$134.95
Your vehicle's "instant center" determines it's ability to transfer weight upon acceleration for better traction. BMR lower control arm relocation brackets move the instant center of your vehicle by changing your control arm angle. These brackets will allow you to tune in the instant center of your chassis, an essential for racing or lowered vehicles.
( 52 )
$129.95
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 39 )
$104.38
—
$112.40
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$128.99
—
$153.99
Make your differential perform even better than it did from the factory with Ford Performance Parts 8.8 in. Traction-Lok rebuild kits. They allow you to do the job right and can save you a big chunk of change by rebuilding in lieu of having to do a complete total replacement. Performance to mileage, or a little in between, no one knows how to make your Ford perform better than Ford Performance Parts, so make them your #1 source for performance parts for your Ford vehicle.
( 82 )
$164.99
Wrap yourself in even more cabin protection, these Competition Engineering 10-point roll bar strut kits are the partner package for the 10-point roll bar main hoop kits. They include the two rear struts, two front door bars, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 joint gussets. These combined with the main hoop kit give you the surrounding protection of a 10-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 3 )
$184.99
For fast, precise, and comfortable shifts, grab an American-made Summit billet aluminum short-throw shifter! The heavy-duty body is completely CNC machined—no welds, stampings, or castings—for durability and a precise fit. Inside, the nickel plated steel pivot shaft has been machined to exacting tolerances for smooth operation, and offset pre-load springs help you snag third even when shifting hard. Your shifts are 30 percent shorter, the lightweight forged aluminum stick places the knob closer to the driver, and you can re-use your factory boot and knob for a clean look.
( 130 )
$140.99
WeatherTech seat protectors are the perfect accessory for owners needing protection for their front and rear vehicle seating. These seat protectors are made from a poly/cotton twill fabric with a durable water-repellent finish that will combat any juice box spill, cereal crumbs or pet mess! They also feature an extra-layer of nylon lining to further protect the covered seat(s). Additional features of WeatherTech seat protectors include: * Semi-custom to fit the size and type of most year 2000 vehicles * Fits most bench and bucket-style front and rear seats * Quick and easy installation, as well as easily removable for cleaning * Stays in place with durable straps, specialty inserts and a non-slip bottom * Seat protector is machine washable and reusable Please note: you must have a headrest on the seatback of your vehicle for the WeatherTech Seat Protector to strap on to. Also keep in mind, if your vehicle is equipped with a center seatbelt, it will not be accessible with installation of the seat protector.
( 11 )
$161.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
