Availability
Showing In Stock Items. Show All 189 Items.
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 55 )
$257.99
$109.99
—
$242.99
The engineers at FAST teamed up with the airflow specialists at RHS to develop a 3-piece, polymer intake manifold. They are constructed from a proprietary advanced polymer material that offers a host of benefits over aluminum aftermarket intakes, including lighter weight and improved strength and heat dissipating characteristics. While they feature a 102mm air inlet that is perfectly suited to the FAST Big Mouth 102mm throttle body, they can also be used with stock or aftermarket 90mm or 92mm throttle bodies. Other features include integrated nitrous bungs and perfect bolt-on fitment that allows for the use of factory accessories without modifications or clearance concerns. FAST LSXR intake manifolds' 3-piece modular design allows for easy disassembly and porting. This new design gives you the ability to remove individual runners from the manifold for modification.
( 26 )
$450.95
—
$1,496.95
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 51 )
$340.99
$180.99
—
$240.99
Go retro with Edelbrock Performer RPM LS1 intake manifold kits. These kits give you the opportunity to use a carburetor on your originally computer-controlled engines. Performer RPM LS1 kits include a wiring harness and an MSD ignition controller (compatible with 24x and 58x) which works with OE sensors to fire the coil-on-plug ignition system and offers a choice of six timing curves. A special throttle and transmission bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included. Make your LS1 engine an easy retro-fit into any muscle car, street rod or marine application with American-made Edelbrock Performer RPM LS1 intake manifold kits.
( 10 )
$1,027.95
When upgrading your LS-powered vehicle, don't forget to replace the factory steam tubes. Our Summit Racing™ Pro LS steam line plumbing kits eradicate trapped air and steam pockets from your engine to prevent hot spotting and overheating as well as provide more flexibility when using aftermarket intakes. Kits vent all 4-corners (except SUM-220952 and SUM-220952B kits) and contain black anodized billet aluminum fittings, steam port adapter, O-rings, stainless steel bolts, -3AN or -4AN hose and hose ends, (stainless steel hard lines and 5-port distribution block on SUM-220959 kit only) to make installation easy and more attractive than OEM lines, offering a cleaner look and better waterflow.
( 16 )
$74.99
—
$169.99
These FAST LSX intake manifolds are the only 3-piece Gen III composite manifolds proven to deliver increased performance without compromising bottom-end drivability or high-rpm horsepower. They easily bolt onto GM Gen III (LS1, LS2, and LS6) engines and are designed to work with the 92mm FAST Big Mouth throttle body. The new stylish black intake manifolds deliver terrific performance right out of the box and can be ported by the customer for even more flow. As requested by previous LSX customers, the FAST LSX intake manifolds feature the added benefits of corrosion-free stainless steel assembly bolts, an improved throttle body sealing flange, and O-ring gasket and threaded insert throttle body mounts that provide increased durability.
( 5 )
$1,222.95
FAST LSXRT intake manifolds are designed specifically for GM truck engines (4.8L, 5.3L, and 6.0L) and LS1, LS2, and LS6 race applications where hood clearance is not a concern. FAST LSXRT 102mm intake manifolds follow the path chartered by the original FAST LSX Gen III intakes by featuring a modular design that allows for easy porting and disassembly and a runner design that yields an incredible 25 peak horsepower gain over the stock intake (on a stock 6.0L engine with a Big Mouth 102mm throttle body). Similar to the LSXR 102mm intake manifold for cars, the LSXRT features the ability to remove individual runners for modification. LSXRT's are constructed from a proprietary precision injection molded polymer which offers many benefits, including lighter weight, greater strength and lower heat soak propensity. While they feature a 102mm air inlet that was designed for the FAST Big Mouth 102mm throttle body, they can also be used with stock 90mm or aftermarket 92mm throttle bodies (78mm three-bolt throttle bodies require an adapter). Other features include integrated nitrous bungs and precise bolt-on fit that permits the use of factory accessories and OEM fuel/emission connections without adjustments or clearance issues. Some GM truck models may require the FAST 92mm or 102mm throttle body.
( 10 )
$1,269.95
—
$1,467.95
Holley EFI LS Hi-Ram intake manifolds are designed for your high performance race engine. Big cube and high-rev applications without height limitations are the intent for these manifolds. The modular design of these Holley Hi-Ram intake manifolds offers a runner length and as-cast tapered cross-section design that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with EFI LS Hi-Ram intake manifolds from Holley.
( 39 )
$1,149.95
—
$1,299.95
On Sale
Holley LS Modular Lo-Ram EFI intake systems have a top-feed plenum entry configuration, designed to allow the currently available Hi-Ram 105mm plenum tops to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications and was conceived to package with an air-to-water plenum-mounted intercooler—with a shorter overall height than is possible with other existing intake manifolds. Using a modular design, the top-feed plenum configuration with 105mm top keeps the overall height at just 9.07 in.! Additional features and specs include: * Cast aluminum construction * Modular design allows the use of the included top-feed plenum entry * Designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads * Will also work with OE or aftermarket cylinder heads * Designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000 to 8,000 rpm, depending on application * Low height to aid the packaging of a plenum-mounted air-to-water intercooler in a top-feed configuration (or to fit under a stock or mildly modified hood in the front-feed configuration) * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits come with two sets of brackets—a set for long (usually standard length) fuel injectors, and a set for short (such as Pico or LS7) fuel injectors
( 1 )
$1,049.95
—
$1,099.95
BTR Equalizer 1 intake manifolds are low-profile, high performance intakes. Cast from 319 aluminum, these Brian Tooley Racing manifolds are designed for combinations that are looking to make peak power between 6,000 and 8,000 rpm. Boosted engine combinations are actually more reliable making peak power in this higher rpm range, compared to making peak power around 6,500 rpm like most stock style intakes, provided the valve train is engineered properly. These units are available for a variety of applications from 1997 and up. Features and specifications for Equalizer 1 manifolds: * O-ringed port openings and lid surface * Easy insert steep chamfer injector bores for trouble-free injector O-ring insertion * Underslung plenum design for maximum hood clearance * 102mm profiled throttle bore * One map sensor location in rear, with two additional user optional locations * Additional user-defined LS3 and LS1, LS2, and LS6 map sensor bores * ISO9001:2015 certified machining * 2-piece design for easy porting access * Lightweight CAD-generated design * Profiled port openings for optimum out-of-the-box performance * All threads are roll form aircraft standard DSDV * Clears F-body cowls * Clears C5 cowls with minimal massaging to intake
( 5 )
$749.99
—
$799.99
Our Summit Racing Max EFI LS intake manifolds feature a curved edge design with a large 9.7-liter plenum, for maximum flow and horsepower. They are available in both tall and low-profile, and satin or black anodized finishes. They include gaskets, mounting hardware, and a billet fuel rail kit.
( 9 )
$499.99
BluePrint Engines dual plane Vortec intake manifolds are perfect to top any SBC ranging from 350 to 400 c.i.d. These cast aluminum performance replacements are pressure-tested for leaks—and are capable of supporting over 500 hp. They're a great match for BluePrint H8002K and HP8103 headed engines, or iron Vortec headed engines. Gaskets and hardware are included. Additional details (P/N MLL-BPP350VINT): * Engine block style: SBC Stock/OEM standard deck * Cylinder head style: Vortec * Carburetor mounting: 4-barrel square bore * Intake style: Dual plane * Basic operating RPM range: Idle - 6,200 * Intake manifold height: 4.595 in. * Intake finish: Natural * Intake material: Aluminum * Features two 1/2 in. NPT plugs on top of the front water crossover, and one 3/8 in. NPT plug facing forward, perpendicular to the thermostat. * The rear most 1/2 in. NPT pipe plug on the rear intake runner is for brake booster. This is NOT a water port. * NOTES: This intake manifold features the Vortec (vertical intake bolt) Pattern. This is the production intake manifold used on BluePrint SBC engines 400 c.i.d. and smaller. May not be compatible with OEM chokes or OEM accessory mounting brackets.
( 3 )
$215.95
These Vortec manifolds with TBI from Chevrolet Performance are designed for maximum horsepower with throttle body fuel injection and EGR usage. These manifolds will fit all Vortec-designed cylinder heads.
( 17 )
$683.17
Seal up your engine while looking good with one of these ICT Billet LS lifter valley covers. They are designed to fit (Non-DoD) engines and are milled from a solid block of aerospace-quality billet aluminum. The covers offer outstanding block rigidity, while the precision-machined underside provides an excellent seal using the existing factory O-ring. Their wide chamfered edges ensure adequate intake manifold runner clearance and they include the necessary flush mount, Allen head stainless steel mounting hardware.
( 71 )
$49.99
—
$74.99
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 439 )
$453.95
—
$680.95
Edelbrock Performer RPM LS1 intake manifolds are manifold-only packages that allow you the opportunity to use a carburetor on these originally computer-controlled engines. Edelbrock LS1 intake manifolds are manufactured from aluminum and offer you the ability to maximize torque and increase the power curves of your engine. Are you going back to the traditional carburetor? Rely on Edelbrock Performer RPM intake manifolds.
( 12 )
$407.95
—
$638.95
Dual-plane Performer Vortec intake manifolds are based on Edelbrock's popular Performer Series. They're intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock E-Tec aluminum heads. They are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. They have no provision for an exhaust-heated choke.
( 32 )
$339.95
—
$540.95
On Sale
Holley LS Modular Lo-Ram EFI intake manifolds are designed for GM LS Gen III and IV engines equipped with GM LS1/LS2/LS6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and a 105 mm throttle or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood in the front-feed configuration. The modular design allows the use of front-feed plenum entry, while intake design facilitates custom inlet duct and throttle body placement. Additional features and specs: * Cast aluminum construction with satin silver finish * Modular design allows the use of front-feed plenum entry * Clears 4th Gen Camaro and C5 Corvette cowls and hoods without modification * With forced-induction and the short runner length the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger being used * High-volume fuel rails and mounting hardware included with 3/4 in.-16 O-ring ports (8 AN) * Fuel rail kits include two sets of brackets; a set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors
( 8 )
$649.95
—
$1,016.95
On Sale
Holley Sniper EFI fabricated intake manifolds are budget-friendly and performance laden! These durable Holley hi-ram manifolds feature 3mm (1/8 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. The EFI versions have 92mm or 102mm throttle body openings, as well as runners with tapered tops to increase velocity and evenly distribute airflow. They also include 3/8 in. fuel rail kits and, of course, are branded with the Holley Sniper EFI logo. Budget and performance go hand-in-hand when it comes from Holley in the form of their Sniper EFI fabricated intakes. Order the model and options recommended for your make/engine application.
( 17 )
$899.95
$483.95
—
$899.95
On Sale
These CrossWind intake manifolds from Professional Products feature identical plenum and runner designs to the Typhoon. The main difference is that there is an open area under the plenum chamber. This feature is sometimes called an air gap design. The air flowing under the plenum provides a cooler charge for the incoming air with less heat transfer from the engine. This cooler air charge provides additional power.
( 43 )
$171.99
—
$314.99
$154.79
—
$283.49
Edelbrock Performer RPM Vortec intake manifolds are based on their highly successful Performer family. They're designed for street rods, marine applications, and a host of engine swaps using small block Chevy V8s with 1996 and later Vortec (L31) cast iron heads or Edelbrock's E-Tec aluminum heads. They accept single square bore carbs only and have an external water bypass boss machined into the front of the water crossover for use on 1996 and later Vortec production engines. Their 1,500 rpm to 5,500 rpm power band makes them an excellent choice for a wide range of setups.
( 21 )
$389.95
—
$617.95
Dart dual plane intake manifolds are designed to improve torque, add horsepower, and make that otherwise stock engine look a little more aggressive. They are manufactured from durable cast aluminum and are machined to tight tolerances for excellent flow characteristics. The manifolds' optimized runner length and plenum style offer improved low end to midrange performance.
( 3 )
$814.95
Maximize your car's potential with ICT Billet Hi-Ram lid spacers. Constructed of billet aluminum, they allow a larger volume of air inside the plenum on Holley Hi-Ram intake manifolds. More air means more power. All of the necessary hardware is included to make installation easy. Help your ride breathe more clean, cool air with an assist from ICT Billet Hi-Ram lid spacers.
( 1 )
$289.99
Holley LS steam vent kits prevent hot spots or overheating. Designed to eliminate trapped air and steam from your engine, these complete kits are available to plumb your engine and include the appropriate hose and hose ends to make installation a breeze. They are more attractive than the OEM lines and offer increased flexibility when using aftermarket intakes and other accessories on your performance vehicle. Holley LS steam vent kits may feature: * Adjustable pivoting steam vent adapters * Black push-on or stainless braided Speed-Flex hose and hose ends * Available in front or 4-corner plumbing options
( 11 )
$62.45
—
$170.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
