2000 - On Sale Savings Central - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

On Sale

MSD 8.5mm Super Conductor Spark Plug Wire Sets

MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.

4.65 out of 5 stars ( 1993 )

$114.95

—

$269.95

$103.45

—

$242.95

On Sale

MSD Street Fire HEI Distributors

Street Fire HEI distributors are the value-line brand from MSD Ignition. They offer a quality designed alternative to the bottom bargain parts that spring up in the marketplace. Knowing the importance of a centrifugal advance in a distributor, MSD engineers made sure the Street Fires include an advance assembly with coated weights and welded weight pins. The units are also fit with the same distributor gear that's used on the MSD Pro-Billet models. The metallurgy of this gear has been refined for years to perform through the harshest conditions. Inside, the ignition module and coil work together to produce a stout spark to light the fuel mixture for great performance. Order the Street Fire model recommended for your vehicle and engine application.

4.56 out of 5 stars ( 290 )

$222.95

—

$255.95

$200.65

—

$230.35

On Sale

Holley LS Coil Harnesses

Holley LS coil harnesses are factory replacements for stock LS coils. These EFI LS coil sub harnesses are intended to be used with factory LS coils and various Holley EFI main harnesses with coil-on-plug connectors. They are built with the same high-quality connectors and wire loom found on all Holley EFI harnesses, guaranteeing a perfect match in your engine bay. Are you tired of scouring the junkyard for stock LS coil sub harnesses? Holley has the solution. Holley LS coil harnesses feature: * OEM connectors provide a secure connection between your ECU and Ignition Coils * Techflex F6 braided wire loom keeps your engine bay looking clean, while providing abrasion resistance * Plug-and-play fitment * Can be used to replace a damaged factory coil harness

4.56 out of 5 stars ( 18 )

$204.95

$184.45

On Sale

Holley Mechanical Fuel Pumps

Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.

3.86 out of 5 stars ( 359 )

$138.95

—

$236.95

$107.22

—

$213.25

On Sale

Summit Racing™ Rear Lowering Leaf Springs

Summit Racing™ offers rear lowering leaf springs for a wide range of vehicles, from the 1960s and up. These suspension enhancements can give your car, truck, or SUV a more aggressive stance with improved ride quality. The leaf springs are available for a variety of lowered heights; order the model recommended for your application.

4.27 out of 5 stars ( 37 )

$134.99

$121.49

On Sale

Holley Sniper Throttle Bodies

With Holley Sniper throttle bodies, Holley engineers went back to the drawing board to build the ultimate air valve for your engine! They feature enlarged bore sizes, allowing for increased airflow to support your higher horsepower needs. A progressive throttle pulley enhances low-speed drivability, and a double return spring provides solid and secure throttle control feel. These units are maximized for your application, with a 4-bolt style mounting pattern; most models include bolts and gaskets. Order the throttle body designed for fitment with your year/make and engine family.

3.95 out of 5 stars ( 40 )

$255.95

—

$349.95

$197.36

—

$246.55

On Sale

$116.95

On Sale

Summit Racing™ Fabricated Intake Manifolds

A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.

3.25 out of 5 stars ( 32 )

$349.99

—

$429.99

$249.99

On Sale

Weiand Action Plus Mechanical Water Pumps

Weiand Action Plus pumps are ideal for street use. They feature a stamped steel impeller that provides optimum water flow, while consuming less horsepower than stock pumps. The impeller also limits high rpm cavitation (air in the water) and will not crack, corrode, or fatigue like aluminum impellers can. The Action Plus pumps also feature a heavy-duty shaft, bearing, and seal. Action Plus aluminum pumps weigh approximately 30 to 50 percent less than stock iron pumps, and have an exclusive counterbore to keep the bearing from "walking" in the housing.

3.77 out of 5 stars ( 154 )

$185.95

$167.35

On Sale

AEM Electronics High-Flow In-Tank Electric Fuel Pumps

These AEM Electronics high-flow in-tank electric fuel pumps are designed for high performance, naturally aspirated, and forced induction EFI. They deliver reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The pumps include a rubber sleeve, end caps, a prefilter, hose, clamps, and flying lead.

4.54 out of 5 stars ( 50 )

$149.95

$134.95

On Sale

MSD HEI Coils

MSD HEI coils increase spark energy when used with MSD HEI HEAT modules. Now you can replace your stock coil with these high-energy unitized coils for HEI distributors. They have low-inductance, high-temperature windings which charge the coil faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications, as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.

4.67 out of 5 stars ( 36 )

$125.95

$113.35

On Sale

ACCEL Super Coils

ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.

4.53 out of 5 stars ( 806 )

$149.95

—

$299.95

$134.95

—

$200.65

On Sale

Scott Drake Classic Aluminum Valve Covers

Enhance the look of your engine with a pair of Scott Drake classic aluminum valve covers for small block Ford engines. Diecast from high-quality aluminum alloy, the covers are available in more than a dozen styles to customize your ride. Finish options include polished, black, black wrinkle, and black powdercoat. These valve covers also feature a cadmium plated oil filler tube to help stop corrosion, an improved oil baffle design to accommodate high-lift cam shafts—and will work with most roller rockers. Order the model designed for your vehicle application.

4.49 out of 5 stars ( 186 )

$229.95

$206.95

On Sale

Hays Heavy-Duty Flexplates

Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.

4.16 out of 5 stars ( 63 )

$191.95

—

$227.95

$172.75

—

$205.15

On Sale

Summit Racing™ Mid-Mount Motor Plates

Summit Racing™ mid-mount motor plates are created from .250 in. thick 6061 T-6 aluminum, and are designed to work with front motor plates to provide extra strength and eliminate engine movement.

Not Yet Reviewed

$113.99

$102.59

On Sale

Weiand Oil Pan Packages

Weiand oil pan packages were clearly visible on those old gassers, getting them down the track with speed and consistency. The oil pan features trap door baffles to help keep oil under control during hard acceleration, as well as increased oil capacity to keep high performance engine oil systems fed properly. Choose from among dozens of Weiand oil pan packages—a great option for drag race, road race, and circle track applications.

3.13 out of 5 stars ( 108 )

$216.95

$195.25

On Sale

Flowmaster Super 40 Series Delta Flow Mufflers

These Super 40 Flowmaster mufflers significantly outflow the older two-chamber mufflers. They help create even more horsepower with less interior noise and a deeper exterior sound. These mufflers feature a design patterned after Flowmaster's race mufflers. These Flowmaster mufflers far exceed older models on Dyno tests. They create a beautiful hot rod sound, along with increased horsepower and gas mileage. So, if you want to get that hot rod sound and add some horsepower, then these Flowmaster mufflers have you covered.

4.77 out of 5 stars ( 187 )

$152.95

—

$171.95

$137.65

—

$154.75

On Sale

MSD Steel Distributor Gears

MSD's high-grade steel distributor gears are burnished for a smooth, scuff-free finish, and are machined for precise gear mesh. Excessive clearance causes timing fluctuation throughout the rpm range, resulting in lost horsepower, so MSD also designed these gears for tighter mesh between the camshaft and distributor drive gears.

3.61 out of 5 stars ( 33 )

$145.95

$131.35

2000 Parts and Accessories