Availability
On Sale
Summit Racing™ Performance LS7 hydraulic roller lifters are a definite upgrade over stock originals. Designed for high horsepower engines that demand increased oiling and higher-rpm capabilities, these replacement lifters will fit in SBC roller engines, as well as LS-based engines without active fuel management (AFM/DOD). Beat the competition to the finish line with Summit Racing™ Performance LS7 hydraulic lifters!
( 18 )
$229.99
$204.99
On Sale
Summit Racing™ LS lifter and guide kits offer top-quality, precision-made pieces at an excellent value! These kits include a set of roller lifters, lifter guide bolts, and LS2 lifter guides.
( 41 )
$265.98
$240.98
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 55 )
$204.99
$199.99
On Sale
You won't find a better quality cam for your LS-based engine than our Summit Racing™ Pro LS series of cams. These convenient combo kits enable you to get the cam along with the correct matching lifters. Pro LS cam, lifters, and trays are included in one easy-to-order part number. Whether for street/strip, turbocharged, or racing use, you'll find the kit recommended for your year/make and engine application.
( 4 )
$551.82
—
$600.57
$540.97
—
$590.97
On Sale
Deliver power-building airflow to your engine with Summit Racing™ Vortec cast iron cylinder heads. These heads outflow the early model small Chevy heads with wide-open intake runners, efficient combustion chambers, and a high-performance valve job. They are made from a strong cast iron alloy that makes them less brittle than comparable Vortec heads on the market. For performance and great value, select the Summit Racing™ Vortec cast iron cylinder heads preferred for your build.
( 74 )
$649.99
$599.99
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 29 )
$349.99
—
$429.99
$249.99
—
$329.99
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 51 )
$340.99
$240.99
On Sale
We understand that it doesn't matter whether you're cruising or racing--a comfortable set of seats is a must-have for any vehicle. These Summit Racing™ sport seat combos include two Summit Racing™ sport seats, two Scat seat mounting brackets, and two Summit Racing™ bracket adapters. With adjustable sliders, lumbar and shoulder supports, cutouts for safety harnesses, and recline and tilt forward mechanisms, these Summit Racing™ sport seat combos offer perfect adjustability and comfort for any road or track vehicle.
( 25 )
$735.94
$635.94
On Sale
Replace your old and generic looking valve covers with a new pair of Pro LS valve covers from Summit Racing Equipment®. These cast aluminum valve covers are available in a variety of styles, height profiles, and finishes to dress up your engine bay.
( 33 )
$238.99
$214.99
On Sale
Summit Racing™ 5-layer custom car covers are available to shelter a range of vehicles from classic and modern muscle cars to Jr. Dragsters and Teslas. Featuring all-weather fabric for indoor and outdoor use, our covers have a multi-layer, non-woven construction with a polypropylene outer, an inner moisture barrier, and a soft Spunlace inside lining to protect fine paint finishes. Choose the proper fit for your vehicle from the Summit Racing™ 5-layer custom car cover selection available. Additional features: * Excellent protection in all climate conditions * Sewn in the USA with the highest quality standards * Increased strength and dust protection * Ding protection, high UV protection, and excellent moisture resistance
( 21 )
$241.99
$217.79
On Sale
Summit Racing™ fuel pump and regulator Pro Packs consist of proven performance fuel pumps and regulators. Just select your brand, flow rate, and pressure requirements, and one part number gets you everything. We've even included a relay kit with the electric fuel pump combos. Economical and convenient, Pro Packs are available for virtually any application from the 1950s and up.
( 60 )
$280.90
$200.90
On Sale
Summit Racing™ Extreme Duty cylinder head stud kits are engineered to withstand the stress and abuses that high-horsepower engines endure. These fastener kits come with all necessary studs, nuts, washers, lubricant, and instructions to ensure maximum performance and reliability. Order the hardware recommended for your year/make and engine application. Extreme Duty fasteners feature: * 190,000 psi tensile strength minimum * High-strength chromoly steel utilized for all products * Precision manufacturing processes ensure consistent product performance * All studs are twice straightened to guarantee straightness * Threads are rolled after heat treatment for high strength * Tensile and yield strength tested after thread rolling * Uniformly applied black oxide surface finish * Anti-rust oil coating to protect fasteners from corrosion
( 2 )
$439.99
$349.99
On Sale
Summit Racing™ Pro LS T6 single and twin turbo cams have increased overlap from the standard turbo cams to take advantage of the better turbine housing flow. As a result, these cams will increase RPM and work with larger cubic inches better in race applications where an open front exit exhaust is utilized.
Not Yet Reviewed
$349.99
$299.99
On Sale
Summit Racing™ forged crankshafts offer maximum strength and the best value for your dollar! Our crankshafts are non-twist forged from certified 4340 steel. They are put through several stages of heat-treatment, and then stress-relieved and shot-peened to provide the strength and reliability you demand for your high performance application. Each journal is micro-polished and a .125 in. radius is used for increased strength. Summit Racing™ forged crankshafts help you get the most in value and performance.
( 10 )
$1,019.99
$949.99
On Sale
Summit Racing™ Pro LS camshaft and spring kits are designed for GM LS engines. Each cam kit offers a budget-friendly option without sacrificing quality and performance. They're available in Stage 1 or 2 performance configurations. Stage 1 kits include the cam and matching drop in beehive springs with seals or optional upgraded dual spring and retainer kit. Stage 2 kits give you an additional cam change gasket kit and a crank bolt. Order the Summit Racing™ Pro LS camshaft kit recommended for your year/make and engine application.
( 37 )
$584.96
—
$766.95
$534.96
—
$716.95
On Sale
Summit Racing™ Mockup Replica Blocks are light-weight and ship disassembled for ease of shipping and storage. The individual panels are easily assembled with tabs and slots for superior rigidity and accuracy compared to bolt-together types. Steel resists the heat from welding, so custom motor-mounts can be fabricated right on the block.
( 10 )
$399.99
$349.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
