Availability
Showing In Stock Items. Show All 59 Items.
Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.
( 62 )
$1,849.99
—
$1,899.99
Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque
( 9 )
$1,576.75
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 31 )
$1,809.95
Drivers need a clutch that offers smooth engagement, quiet operation, light pedal effort, and high-end holding capacity. Centerforce DYAD drive system multi-disc kits offer that, and more. These kits are designed and developed to meet the needs of modern high-end vehicles. This technology allows engine torque levels to exceed 750 lb.-ft. and still be driven every day. Take your vehicle to the next level in high performance with DYAD DS multi-disc clutch kits and feel the difference!
( 1 )
$1,816.95
Intended for the high horsepower street/strip fan, McLeod RXT 1200 twin disc clutch kits are able to handle 1,200 crank horsepower. With a higher clamp load than standard RXT twin disc clutch kits, RXT 1200 clutch kits can handle almost any horsepower you can throw at them and still remain streetable. Ceramic-lined clutch discs provide smooth engagement with a stock-like pedal feel to make them ideal for the street performance enthusiast. A flat-style flywheel with a crank relief of 6.250 in. diameter or less is required for proper fitment.
( 12 )
$1,599.00
—
$1,795.00
VEGE Remanufactured automatic transmissions enable you to get back on the road quickly—without breaking the bank! With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured automatic transmissions with a level of quality that equals that of new OEM products at extremely competitive prices. The parts are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Thousands of models are available, with aluminum case, torque converter included, and gear options from one through eight. Includes fluid. Get your vehicle shifting into gear with a reman auto-trans from VEGE.
( 7 )
$1,835.50
—
$2,069.99
Chevrolet Performance has taken the hassle out of transmission installation. Clutch kits are available on their own, or with other key components you need to complete the job more easily. Choose the kit that's appropriate for your particular transmission—and experience a faster installation utilizing the quality Chevrolet Performance parts included.
( 2 )
$1,645.40
South Bend Clutch Dyna Max street dual disc clutch kits are offered for a range of applications and setups. These clutch kits are made using high performance materials and include everything you need for your clutch installation. Many kits include Kevlar® pilot bushings. When it comes to street performance, you can count on South Bend for top-quality components.
( 79 )
$1,811.57
Centerforce DYAD XDS twin disc clutch kits feature a patented centrifugal weight system (where applicable) for superior clamp load over stock. Every kit is equipped with a lightened billet steel flywheel—providing low inertia and resulting in quicker rpm. All components are match-balanced and ready for installation using ARP fasteners. Order the kit designed for your specific vehicle. Centerforce DYAD XDS twin disc clutch kits may feature: * No complicated setup or adjustments * Race-proven paddle-style discs * Quiet, positive drive floater * Great drivability and light pedal effort * Excellent driver control * Specification card * Greater longevity * Holds 400 to 1,600 lbs.-ft. of torque at the flywheel * Fully dampened clutch system developed for vehicles with extreme power levels
( 1 )
$1,816.95
McLeod Street Twin clutch kits are designed to be high performance replacements for your OEM clutch. They include everything you need--a new disc, pressure plate, and your choice of a billet steel or billet aluminum flywheel. McLeod Street Twin clutch kits are pre-balanced to fit specific applications and include the correct alignment tool for installation.
( 4 )
$1,595.00
—
$1,599.00
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 106 )
$1,549.95
—
$1,949.95
RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.
( 1 )
$1,899.00
—
$2,159.00
South Bend Clutch Dyna Max organic clutch kits are manufactured with performance organic friction material. Designed to provide smooth clutch engagement, these Dyna Max organic clutch kits include the necessary parts you need to do the job—and many kits include Kevlar® pilot bushings. The kits are available for a variety of clutch styles and applications and may come with or without a flywheel. Select the kit to fit your application needs.
( 99 )
$1,856.86
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$1,549.95
—
$1,949.95
Not all multi-disc converters are created equal, and with BD Diesel's Triple Torque Force, less is more. To start, BD's in-house CNC-machined cover is designed as one piece, which prevents warping, improper balancing, and leakage. With this design, BD was able to maintain the factory height, thus eliminating the crowding of the pump and the possibility of premature wear. BD Diesel has engineered the dampener for better balancing by riveting it in place, eliminating welding, which can cause warping and affect balance. Each dampener spring is hand-picked to ensure softer engagement. They added notches to the clutch material to prevent fluid adhesion, thus ensuring that even in fluid coupling, the clutches will always have lube. They offer tighter engineered tolerances and a self-centering, 36-external/32-internal, trapezoid-shaped clutch tooth design that enables more contact surface to ensure that the clutch plates properly align, resulting in less friction wear, a longer converter life cycle, and firmer drivability. The clutch plates are also precision-ground flat for smooth operation and consistent wear. Not only will these converters last longer, but they also have 3 times the torque-holding capacity! Triple Torque Force converters come with BD's engineered cast aluminum X-Stator that has fin lengths, angles, and curvatures that are designed to deliver a fluid coupling engine rpm transfer of up to 95 percent, vs. 75 percent with stock stators. This efficiency reduces engine temperatures, increases fuel economy, and better matches the torque curve of the engine, resulting in more torque and horsepower being delivered to the ground. The overall weight of the BD Diesel Triple Torque Force converters has been reduced by 12 lbs. compared to the competition, resulting in better fuel economy and less wear and tear.
( 2 )
$1,624.95
RAM Force 10.5 dual disc clutch kits have a strap-driven floater plate and are precision-balanced for quiet operation. The sprung hub top disc absorbs shock and reduces driveline noise. Force clutches are available with your choice of a 300 Series friction disc or a 900 Series disc. The 300 Series organic disc models are capable of handling 500 to 800 hp; while the 900 Series metallic models can handle between 600 and 1,200 hp. These kits use a marcel spring—a thin, wavy device that helps to eliminate the go-or-no-go tendency that similar dual disc clutches have. RAM Force 10.5 dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the model recommended for your vehicle and engine application.
( 4 )
$1,685.00
These Quarter Master V-Drive clutch and bellhousing kits offer the best balance of performance, durability, and affordability for the money. They feature an open cover, an 8-leg design for maximum strength and cooler operations, and a reduced moment of inertia for lightweight power transfer, making them perfect for sportsman Circle Track, road course, and off-road racers. Their premium internal friction materials can handle high-torque capacities. The kits also include: * CAD-designed, CNC-machined aluminum or magnesium bellhousings * V-Drive clutch system with button * Steel flywheel * Flywheel bolt kit * Reverse mounted Ultra-Duty Quarter Master starter * Fixed mount hydraulic release bearing with clutch inlet and bleed line kit * Racer-rebuildable frictions and floaters to provide extended service life
( 1 )
$1,931.01
XClutch Motorsports clutch kits are performance upgrades that have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Select the kit for your application needs. XClutch 7.25 in. motorsport range is designed to provide a lightweight, high torque capacity solution for race vehicles such as used in time attack racing. The kits are available in single disc, twin disc, triple disc, and quad plate with a ceramic friction material, and are popular in high horsepower vehicles that use sequential gearboxes, and the lightweight design improves engine response. XClutch 7.25 in. race clutch range is ideal for drivers wanting a strong, high performance race clutch without having to compromise on quality. These kits are designed for high revving circuit or time attack applications and offer quick shift times and a lightweight construction. XClutch 8 in. range is designed to suit a wide range of vehicles commonly used in motorsport applications. As the clutch of choice for many club level racers and drifters around the world, these kits offer a great balance between torque holding capability, and heat capacity. These kits are available in both single and twin disc configurations. XClutch 9 in. range are one of their most adaptable kits for performance upgrades and conversions. They are available in organic, ceramic and carbon and offer exceptional torque capacity for high powered vehicles. The twin disc organic range is ideal for high horsepower street use, whilst the ceramic and carbon options are focused on track use where a higher heat capacity is often required.
Not Yet Reviewed
$1,661.17
—
$2,062.04
On Sale
McLeod Magnum Force clutch kits are the perfect choice for racers looking for lightweight, high-torque capacity units. They are specifically designed for oval track, road race, and dry lake applications. The McLeod Magnum Force clutch kits are offered in single, double, and triple-disc combinations. Available for most input shaft splines, the McLeod Magnum Force clutch kits feature optional pin or strap floaters to rattle and have bolt-on counterweights for balanced engines.
Not Yet Reviewed
$1,675.00
—
$1,895.00
On Sale
McLeod Soft-Lok clutch assemblies are the most widely used of all their assemblies. These units are NHRA and IHRA record holders and meet the demands of the most powerful engines, while offering superb holding power and complete adjustability. The secret behind the McLeod Soft-Lok clutch assemblies is their low static pressure, which results in light pedal effort with soft clutch engagement. This allows a vehicle with up to 1,200 hp to leave the starting line harder without excessive tire spin, while maintaining enough holding power for the rest of the run.
Not Yet Reviewed
$1,975.00
McLeod RXT Street Twin clutch kits are ideal for the extreme horsepower enthusiast who wants performance and economy. Capable of handling up to 1,000 hp, the RXT Street Twin clutches are for those who've kicked it up another notch—but still require streetability. The ceramic facing on the clutch discs provides slightly aggressive engagement with a soft pedal effort, making these clutches suitable for most street performance enthusiasts. Match your vehicle specs to the correct model from McLeod. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Available with dedicated flywheel or adapter ring for factory flywheel * CNC-machined and anodized flywheel adapter ring * Smooth engagement with excellent release qualities * Ceramic facings on disc increase holding power over similar organic linings * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 46 )
$1,595.00
Stock clutches are made for stock horsepower. Mantic Clutch USA 9000 Series twin disc clutch kits are direct replacement upgrades that can handle 1,010 lb.-ft. of torque capacity at the crank and roughly up to 820 to 850 lb.-ft. at the wheels (capacity will vary with use and type of power adder being utilized). Engineered for serious performance builds, Mantic 9000 clutch kits are the proven answer to transfer all power to the ground and driving your vehicle with a Mantic Twin is easy, pedal effort remains relatively low, with approximately 12 to 15 percent increase over the OE clutch pedal feel. Available for many applications, Mantic Clutch 9000 Series twin disc clutch kits with their ceremetallic friction material and all billet construction make them the best for severe duty yet street friendly. Features and benefits: * SFI approved 1.1 * All billet construction * No Flex at high rpms * High-torque capacity * Lightened flywheel revs quicker compared to heavier OE flywheels * Completely rebuildable—modular construction makes service easy * 9 in. twin disc clutches reduce Moment of Inertia (MOI) for quicker more precise shifts * Ceremetalic friction material offers more heat resistance * OE hydraulic release bearing * All necessary hardware * Cover and components machined from billet stock adding strength and durability
( 2 )
$2,014.00
South Bend Clutch Super Street dual disc clutch kits are offered for a range of applications and setups. These clutch kits are made using high performance materials and include everything you need for your clutch installation. When it comes to street performance, you can count on South Bend for top-quality components.
( 1 )
$2,088.97
RAM truck pulling clutch kits are custom-assembled for your specific application. These units feature a heavy-gauge steel cover with welded spring guides and a steel pressure ring. Flywheels are available in 30 or 40 lb. weights, as well as in billet aluminum. The clutches can be set up with either 5135 or 5191 compound iron discs with 1 to 10 splines. Single disc slipper-style clutches can be used with engines producing up to 800 hp, or where very limited slipping is desired. These clutches utilize the same quality components as the RAM dual disc pulling clutches. These units can be assembled with your choice of sintered iron disc materials and flywheel weights. Dual disc clutches will allow a more controlled slip as the vehicle comes out, without severe wear or every-round maintenance. Dual disc clutches are built to fit different stock depths or deep bellhousings.
( 2 )
$1,850.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
