Availability
Showing In Stock Items. Show All 234 Items.
Holley offers MAP sensor adapters for a variety of Chevrolet LS engine applications from 1997 and up. They feature pre-terminated connectors and wiring for a direct plug-and-play installation. Depending on the model you select, the adapter will allow: * The installation of an LS3 MAP sensor in an LS2 or LS1 equipped vehicle * The installation of an MPFI WeatherPack 3-pin connector MAP sensor to the 3-pin Delphi GT connector * The installation of a Delphi MIP 3-pin connector MAP sensor to the 3-pin Delphi GT connector
( 20 )
$36.00
—
$40.21
Summit Bucks
ACDelco throttle position sensors electronically inform the powertrain control module (PCM) of the throttle valve angle. The PCM uses this input to regulate your fuel and ignition systems. These replacement sensors are available in dozens of models for fitment on thousands of vehicles spanning a half-century. For the proper fit and performance, order the ACDelco throttle position sensor recommended for your application.
( 20 )
$51.99
Try Dorman engine oil pressure sensors for accurate engine oil pressure readings. These replacement sensors will help you to protect your vehicle from being driven at low oil pressure, to avoid costly engine repairs and help maintain performance.
( 10 )
$45.99
These Delphi camshaft position sensors feature a digital output design for maximum signal to noise ratio. They are not impacted by temperature changes and provide long-lasting sensor protection. These Delphi camshaft position sensors are also manufactured to meet or exceed OE requirements to ensure quality and long-lasting durability.
( 13 )
$20.99
—
$54.99
Summit Bucks
ACDelco GM Genuine Parts engine coolant sensors are a GM recommended replacement component for many vehicles on the road today. These original equipment engine coolant sensors are manufactured to fit your GM vehicle, providing you the same performance, durability, and service life you expect from General Motors.
( 69 )
$25.99
—
$41.99
Summit Racing™ MAP sensor adapters enable you to use a Holley LS2 harness with LS3 engines. These adapters feature pre-terminated connectors and wiring for a direct plug-and-play installation.
( 4 )
$28.99
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 81 )
$30.99
—
$48.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 92 )
$29.50
—
$55.99
Delphi ignition knock sensors maximize your engine's performance--regardless of fuel quality! Their knock sensors hear various knock frequencies under many operating conditions to detect shifts and provide an accurate signal to your engine control module. The sensors meet or exceed OE requirements and reduce potential damage to your internal engine components. Knock, knock-- who's there? Engine. Engine who? Engine gonna buy me a Delphi ignition knock sensor? Listen to your engine--choose Delphi.
( 30 )
$22.99
—
$49.99
Dorman knock sensor wiring harnesses play a dual role in helping to monitor and protect your engine. They're manufactured from quality materials to ensure years of trouble-free performance. These OEM replacements are available for nearly 2,000 applications from the '90s and up.
( 26 )
$33.99
ICT Billet MAP harness extensions are ideal for use on many Chevrolet LS-based engines from 1997 and up. They're made with OEM tooling, connectors, lock seals, and terminals—and utilize factory harness wire colors. Don't chance a poorly running engine due to cheap wire connectors; choose the quality of ICT Billet MAP harness extensions.
( 4 )
$43.99
Save the environment and gasoline dollars. Tune-up with Bosch premium original equipment-type oxygen sensors for lower emissions and greater fuel economy. Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and reducing harmful exhaust emissions. That's why checking for and replacing a worn-out oxygen sensor with one of these Bosch sensors is an important part of every routine tune-up. These O2 sensors feature an OEM connector for ease of installation. Bosch invented the automotive oxygen sensor and is the top choice of carmakers around the world. Order the model designed for fitment with your vehicle.
( 175 )
$31.99
—
$52.99
Summit Racing™ oxygen sensor extension harnesses are a must with full-length headers and other specific applications. These extension harness sets feature a direct plug-in design to eliminate the cutting and lengthening of oxygen sensor wires, along with high-temperature sleeving to help protect the wires from heat. They're available in a variety of plug styles, harness lengths, and other options. Order the pair recommended for your vehicle.
( 13 )
$36.99
Standard Motor Products replacement throttle position sensors help you get maximum fuel efficiency and power from your engine. A properly operating accurate throttle position sensor is an essential component to helping your vehicle run flawlessly. The throttle position sensors transform the throttle position into output voltage and emit the voltage signal to your vehicle's computer. In addition, the sensors detect the opening and closing speed of the throttle valve and feed the voltage signal to the vehicle's computer. The computer receiving the signal from the throttle position sensor determines optimum engine operating conditions for idle control, fuel enrichment, and fuel cut. Replace your vehicle's worn or malfunctioning throttle position sensor with one of these reliable Standard Motor Products replacement TPS sensors.
( 37 )
$21.99
—
$37.99
Summit Bucks
ACDelco has you covered on all of your vehicle speed sensor needs. The speedometer gauge on your dashboard is getting its data from somewhere--and these are the units. The same signals are also used by multiple control modules to adjust or perform functions, such as cruise control, steering assist, and climate control. These GM-recommended replacement sensors are available for many makes and models of cars and trucks. Match your vehicle specs with the model that'll get you back up to speed!
( 4 )
$25.99
—
$47.99
Are you experiencing hard starts, stalling issues, rough idle, or hearing a slight pinging within your engine? Don't panic. It may be related to a bad throttle position sensor. Delphi throttle position sensors are designed to sense throttle movement and change of position. They also regulate various engine and vehicle operations, including spark timing, air and fuel ratio, torque converter lockup, air conditioning, and idle speeds. With that said, throttle position sensors are an important component, and if your existing sensor seems to have gone bad, just swap it out for a new one from Delphi.
( 13 )
$30.99
—
$52.99
Summit Bucks
ACDelco GM Genuine Parts knock sensors are the GM recommended replacement for the vehicles original component. They monitor the engine for pinging or spark knock. The sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion. The engine control module then uses that signal to adjust the ignition timing and air/fuel mixture. These GM Genuine Parts knock sensors have been manufactured to fit your GM vehicle, providing you with the same performance, durability, and service life you have come to expect from General Motors.
( 105 )
$23.99
—
$37.99
Motorcraft camshaft position sensors will accurately determine the rotational speed of your camshaft. These high-quality, direct-fit OE replacements ensure lasting durability and reliable performance—even under extreme conditions. When you need replacements for your Ford, Lincoln, or Mercury, Motorcraft sensors offer the right fit and function at competitive pricing.
( 1 )
$35.99
Standard Motor T-Series crankshaft position sensors will keep your engine firing in the proper order. They send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. These sensors are manufactured from quality materials to provide the service, along with value, that you need. If you're experiencing crankshaft position sensor failure, order the T-Series replacement designed for your specific car, truck, van, or Jeep.
Not Yet Reviewed
$20.99
—
$24.99
Summit Bucks
ACDelco Gold engine coolant sensors are a high-quality aftermarket replacement component for many vehicles on the road today. These premium sensors are manufactured to exceed your expectations for fit and performance. Order the model recommended for your application.
( 42 )
$27.99
ICT Billet MAP sensor harness adapters make change happen—easily! They offer a selection of pre-terminated manifold absolute pressure sensor adapters to get you plugged in properly. ICT Billet wire adapter harnesses are assembled with OEM tooling, connectors, lock seals, and terminals, and utilize factory harness wire colors. They're available in WeatherPack, Bosch, Delphi/GM, and Metri-pack connector styles for use on many Chevrolet small block LS-based engine applications from 1997 and up.
( 3 )
$43.99
Summit Bucks
ACDelco GM Genuine Parts oxygen (O2) sensors are special feedback sensors on your vehicle's exhaust system and are GM-recommended replacements for your vehicle's original components. They measure the proportion of oxygen in exhaust gases, then using the measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Choose the O2 sensor designed for your vehicle.
( 107 )
$50.99
Delphi engine coolant temperature sensors are top-quality, direct fit OE replacements, which are designed to eliminate connection and failure points. With a one-piece, lead-frame design from the sensing tip to the connector terminals, these units equip your vehicle with a proven design that's built to last. They put the engine under fuel control operation quicker and reduce harmful cold-start emissions by 40 to 50 percent. Delphi engine coolant temperature sensors are built to last, even under the toughest conditions, to endure the long haul. Improve reliability, durability and fuel economy with Delphi.
( 17 )
$20.99
—
$28.99
The camshaft position sensor monitors the rotating position of the camshaft relative to the crankshaft position. This data is sent to the vehicle's ECU, where it is used to adjust the spark timing and the operation of the fuel injectors. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts camshaft position sensor line has superior coverage for domestic and import applications.
( 2 )
$20.99
—
$52.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
