Availability
Because all roller cam lobes are ground flat instead of tapered, like hydraulic or solid cams, COMP Cams provides a means of holding the cam back to the rear of the engine. Their cam buttons ride between the front of the timing gear and the back of the front cover and can be shimmed for proper endplay of the cam. COMP Cams makes solid nylon buttons and roller bearing thrust buttons for the ultimate in performance.
( 109 )
$15.95
COMP Cams cam lock plates will keep your cam installed in the right position. Most locking plates come with Grade 8 bolts and have a black oxide finish.
( 64 )
$10.95
These High Energy hydraulic lifters from COMP Cams feature a patented, constant orifice-metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and the precisely coined bottom surface of the pushrod seat is maintained throughout the engine's rpm range, eliminating excessive oiling at high speeds. The pushrod seat is made of a special powdered metal iron alloy, heat-treated for strength and wear resistance. The longer piston is produced with through-hardened steel that provides more bearing surface and increased lifter longevity. These lifters have a lightweight check valve disk that allows for quicker response, resulting in increased engine speed before valve float.
( 153 )
$14.95
COMP Cams roller lifter link bars are designed to replace your worn or damaged link bars, when fitted to COMP Cams roller lifters. They are precision-crafted from stainless steel and wear-coated for a long life in all applications.
( 1 )
$14.95
COMP Cams rocker arm hold-down bolts are designed to secure your bolt-down, pedestal mounted roller rockers. They are fully rollerized at the roller tip and trunion, and have a black oxide coating applied for corrosion resistance. The bolts are available in different thread sizes and styles, so they're sure to have a set to fit your specific engine combinations.
( 9 )
$2.95
—
$6.95
Replace your stock rocker arm studs with these COMP Cams rocker arm studs. The Magnum series studs work well in applications with moderate lifts and spring pressures. These studs have thin jam nuts for rocker clearance, rolled threads for maximum contact, and ground-flat tops to achieve and maintain accurate valve adjustments. The jam nuts are large in diameter to spread the load over larger areas. COMP Cams studs have generous radii and feature a black oxide finish.
( 24 )
$11.95
COMP Cams offers replacement timing cover gaskets for a variety of applications. Made from top-quality materials, they ensure a leak-free seal.
( 2 )
$14.95
COMP Cams replacement rocker arm bearings are here to help you convert your stock rocker arm into a captured roller trunnion for race applications. They are designed with the increased stability and stiffness that are necessary when working with high-horsepower race applications and are NASCAR spec-proven. If you've purchased a retro-fit trunnion kit, COMP Cams has the replacement pieces you need to keep your engine in perfect working order.
Not Yet Reviewed
$9.95
COMP Cams rocker arm replacement components consist of necessary items like rocker arm stands, retaining rings, adjusting nuts, screws, pedestals, shafts, bearings, trunnions, and bolts. These items are essential to proper rocker arm maintenance and performance. Order the parts needed for your vehicle application.
( 1 )
$6.95
—
$14.95
Replace your stock rocker arm studs with these COMP Cams rocker arm studs. When ultimate strength is required, as with high-rpm roller cam applications, Hi-Tech Race studs are just what you need. These studs have thin jam nuts for rocker clearance, rolled threads for maximum contact, and ground-flat tops to achieve and maintain accurate valve adjustments. The jam nuts are large in diameter to spread the load over larger areas. All COMP Cams Hi-Tech studs have generous radii and feature a black oxide finish.
( 23 )
$11.95
—
$13.95
COMP Cams pushrod guideplates are necessary in high-rpm motors. They keep your pushrods in line with your lifter cups and rocker arms—and prevent deflecting or walking sideways. The guideplates are hardened to prevent premature wear. They're available in sizes and styles for fitment on a variety of engine applications.
( 180 )
$8.95
—
$14.95
COMP Cams replacement rocker arm trunnions are available for the knowledgeable mechanics who have already upgraded their stock LS series rocker arms with roller trunnion rocker arms. Then you come to find that you need to replace a single trunnion. Individual trunnions are available, so you don't need to purchase the entire kit again. Enjoy peace of mind when you use quality replacement parts from COMP Cams.
( 2 )
$14.95
COMP Cams offers these pivots balls as direct replacements for those used in their Magnum rockers.
( 10 )
$6.95
COMP Cams race hydraulic lifters offer superior all-around performance and durability for your race application. Made to super-strict tolerances, these lifters feature tighter plunger-to-body tolerances, premium one-piece pushrod seats, lubricated cam faces, and heavy-duty snap rings. COMP Cams race hydraulic lifters are the racer's choice for optimizing their valvetrain performance!
( 2 )
$15.95
COMP Cams camshaft bolts are designed to prevent breakage. They are rated at 170,000 psi and are available for most popular applications. These bolts are the perfect items to top-off any camshaft installation.
( 7 )
$9.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
