Availability
Stifflers driveshaft safety loops are engineered to exceed NHRA regulations. These one-of-a-kind driveshaft safety loops will save you and your investment from the destructive effects of a broken driveshaft. Quick and easy bolt-in application requires no drilling or welding for a no-hassle installation. Stifflers driveshaft safety loops will work with most automatic and manual transmissions, so you can launch hard with confidence! Stifflers driveshaft safety loops feature: * Lightweight, but strong design * Works with aluminum driveshafts and most aftermarket exhausts * Powdercoated for long life * Complete with all hardware * Includes spacer plates to maintain correct driveshaft angle (where applicable)
( 10 )
$119.95
—
$149.95
Wrap yourself in even more cabin protection, these Competition Engineering 10-point roll bar strut kits are the partner package for the 10-point roll bar main hoop kits. They include the two rear struts, two front door bars, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 joint gussets. These combined with the main hoop kit give you the surrounding protection of a 10-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 3 )
$184.99
—
$437.99
Wrap yourself up in 10 points of protection, these Competition Engineering 10-Point roll bar main hoop kits give you that extra protection required when you truly get competitive and head out to the circuit races. These 10-point roll bar main hoop kits come with the main loop, one top loop, two front down struts, one main hoop crossbrace, and two diagonal hoop supports. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding definitely. Working with the interior out also makes it much easier to get proper fitment, and assure proper welds are achieved. These main hoop kits will require the appropriate strut kits to complete the cage install. These main hoop kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 14 )
$337.99
—
$756.99
SafeTBoy 3-point retractable push button buckle lap belts offer safety every time your buckle up. These modern over-the-shoulder belts feature heavy-duty OEM-style fabric in a large selection of colors fitted with an easy-to-operate, push button-style buckle. SafeTBoy retractable buckle belts are CAD-designed and engineered to fit comfortably across your waist, and then smoothly return to their place when unbuckled. SafeTBoy belts are FMV-approved, and provide the security and protection you need in your vehicle.
( 78 )
$195.50
—
$399.50
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 140 )
$334.95
—
$874.95
Summit Racing™ driveshaft safety loops do one thing—they retain your driveshaft if a universal joint or other drivetrain component decides to break. These bolt-on safety loops are made of heavy-gauge steel, available in fully adjustable or fixed designs, depending on the application. Summit Racing™ driveshaft safety loops also meet NHRA requirements. Choose the model designed for fitment on your particular vehicle.
( 150 )
$41.99
The partner package for the 8-point roll bar main hoop kits, these Competition Engineering 8-point roll bar strut kits provide the support pieces to complete your safety cage. They include: two rear struts, two front door bars, main hoop cross brace, two diagonal hoop supports, six weld joint gussets, and eight 6.000 in. square x 0.134 in. (10 gauge) thick floor plates. Combining these parts with a main hoop kit gives you an 8-point roll cage—a modification required in most racing circuits for providing increased cabin safety and side impact protection. Both the main hoop and the strut kit are available in your choice of mild steel or chromoly. Complete your design of a secure cockpit with a Competition Engineering 8-point roll bar strut kit.
( 5 )
$330.99
—
$675.99
Dragsters and hot rod racers attain speeds between 200 and 300 mph, so every safety precaution can spare you from serious injury or worse. Competition Engineering 8-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including sport compacts and models from AMC, Chrysler, Dodge, GM, and Ford. Competition Engineering 8-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 8-Point Roll Bar Main Hoop Kit, which includes the main roll bar hoop * 8-Point Roll Bar Strut Kit, which includes a main hoop crossbrace, two front door bars, two rear struts, two diagonal hoop supports, six weld joint gussets, and eight 6 in. by 6 in. by 1/8 in. thick steel mounting plates * Complete instructions for a hassle-free installation
( 37 )
$407.98
—
$964.98
Trackspec Trackday Series bolt-in roll bars are available for a wide range of cars, such as Corvettes, Camaros, and Firebirds. Over the past few years, Trackspec has become the leader in roll cage installations and design. As part of the SPEC Corvette racing series, they were driven to develop the best solutions on the market for rollover safety, starting with their DIY Roll Cage kits. For those not looking for a full roll cage, Trackspec developed the best bolt-in 4-point roll bar on the market for the 1982-92 3rd generation Camaro. Many roll bars on the market mount to the floor, which can be a less-than-ideal mounting solution. The Trackspec solution resolves all of this by mounting the main hoop to a vertically supported shelf near the rear seat buckets. They accomplished this by using advanced technologies to develop a billet machine aluminum plate that distributes the load of the main hoop evenly and across a larger surface area. By doing so, Trackspec achieved a stronger mounting solution and ease of installation. The rear down tubes also mount to a supported portion of the unibody structure. Further, the vertical portion of the rear wheel tubs is tied in to increase mounting strength. Order the roll bars recommended for your vehicle. Additional product details: * Industry-leading main hoop mounting solution using oversized billet machined plates to distribute loads on a vertically supported part of the unibody * Rear kicker bars attach to supported portion of the unibody for a strong and secure mount * Rear bars are detachable using TIG-welded couplers for ease of installation and shipping * Driver and passenger seats maintains full articulation * Meets and exceeds NASA and SCCA time trial 4-point bolt-in requirements * Installs easily with simple hand tools in 2-3 hours * Comes fully powdercoated in standard colors * Retains all plastics and rear seat bottoms * Upper rear seat must be removed * Can be unbolted in minutes if needed * All bars are tucked as high and as tight as possible * Made of 1.75 in. .095 in. mild steel DOM * Includes all mounting hardware
( 1 )
$2,049.99
—
$2,199.99
Building your protective race bubble begins with one of these Competition Engineering 8-point roll bar main hoops. Made from your choice of chromoly or mild steel, these strong one-piece hoops mount easily with minimal welding, reinforcing the cabin safety through increased rigidity. This type of modification is required on most racing circuits for improved driver protection. In order to install a complete roll cage, you'll also need the appropriate strut kit (sold separately)--or save time by simply ordering the complete roll bar hoop and strut assembly package. Match your vehicle to the support bars needed to ensure a secure cockpit design.
( 38 )
$95.99
—
$288.99
Make your race car track-safe with Allstar standard roll cage kits. They include all of the bars--1 3/4 in. diameter mild steel tubing and .095 in. wall--to form a protective cocoon. Roll cage kits have driver doors with four curved bars, and a "Z" type right side door and gussets are included. Fast lap times are great, but a safe car, hopefully, lets you walk away to race another day. Reinforce your racer with Allstar standard roll cage kits.
( 17 )
$114.99
—
$419.99
Available for many makes and models, Alston Racing 4-point roll bars are computer bent using 1 5/8 in. mild steel or 4130 chromoly. Alston Racing 4-point roll bars are built specifically for each vehicle and come complete with floor plates and instructions. Please note: cutting, notching, and welding are required to complete the installation.
( 13 )
$249.00
Allstar Performance offers main hoop assemblies for your standard or deluxe roll cage kits. Solidly built and reasonably priced, these high-quality steel assemblies are your foundation to protection. Allstar knows that your roll cage is serious equipment. When you need to replace it, make the right choice with Allstar main hoop assemblies.
( 4 )
$83.99
—
$225.99
Are you running a 12.99 or better in the quarter-mile? If so, then you need BMR Suspension driveshaft safety loops. U-joint failure can have serious consequences, and these safety loops will keep your driveshaft from flying off or dragging. Most styles may be bolted or welded into place and do not require drilling. BMR's steel driveshaft safety loops meet the requirements set by the NHRA—and provide peace of mind so you can focus on the race. Choose the style and finish for your application.
( 43 )
$44.95
—
$159.95
In the event of U-joint failure, Competition Engineering universal driveshaft loops will contain your driveshaft. Made of mandrel-formed 1.25 in. O.D. x .083 in. wall mild steel tubing, these kits offer a lightweight, weld-in alternative to bolt-on types. The driveshaft loop portion is a bolt-on design, for easy removal of the driveshaft.
( 24 )
$169.99
Drag racers want their cars to be as safe as possible, and Competition Engineering 12-point roll bar main hoop kits offer superior strength and chassis rigidity for 360 degree driver protection. This design links the cage to the front frame, essentially making it one solid unit--you'll notice better control and vehicle reaction time. These packages furnish you with the main hoop, one top hoop, two front downstruts, one main hoop crossbrace, and two forward struts. This type of modification is required on most racing circuits for increased cabin safety and side impact security. The units require only minor modifications and welding for solid installation; they're tailored for specific types of cars, so check the applications for matching specs. Competition Engineering 12-pt roll bar main hoop kits require also ordering the appropriate strut kit if you desire a complete roll cage install. Both kits are available in mild steel and chromoly.
Not Yet Reviewed
$374.99
—
$845.99
Competition Engineering 10-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including models from GM, Chrysler, Dodge, and Ford. Competition Engineering 10-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 10-Point Roll Bar Main Hoop Kit, which includes the main hoop, top hoop, main hoop crossbrace, two diagonal hoop supports, and two front downstruts * 10-Point Roll Bar Strut Kit, which includes two rear struts, two door bars, weld joint gussets, and steel mounting pads (6 in. by 6 in. by 1/8 in thick) * Complete instructions for a hassle-free installation
( 21 )
$524.98
In the event that a yoke or a U-joint fails, Allstar Performance driveshaft loops will contain your driveshaft. These safety accessories are a small price to pay for peace of mind. They're offered in a variety of styles and finishes for bolt-on or weld-on installation. Some models are also adjustable. Order the loop that best suits your application.
( 49 )
$44.99
Schroth revolutionary QuickFit Pro harnesses are the world's first 4-point harnesses designed to be used in stock seats that have passed a seat back strength test. They attach to your vehicle's factory seat belt receptacles—which, in turn, alerts the airbag computer that someone is in the seat and restrained; they also take advantage of the seat belt pre-tensioner. This device ignites a pyrotechnic charge that will tighten the lap belt in the event of an accident. Once QuickFit Pro harnesses are installed, the shoulder belts capture the HANS device correctly—and the Anti-Submarining (ASM) Technology firmly plants the hips back in the seat on the rebound phase to keep you from sliding under the lap belts. The 2 in. wide polyester webbing with monofilament woven laterally, better spreads the load of an impact over the entire harness itself. When it comes to safety, Schroth Racing QuickFit Pro harnesses are the way to go!
( 1 )
$569.00
UMI Performance driveshaft safety loops are NHRA-legal and will bolt-in with minimal modifications. They're a must for tracks requiring safety loops on cars running faster than 13.99 in the quarter-mile. Constructed entirely from 0.250 in. thick mild steel, the loops have CNC-machined mounting points for a superb fit, and are fully MIG-welded for outstanding strength. They are available in different styles, covering hundreds of applications from 1964 and up.
( 41 )
$169.99
Allstar Performance offset deluxe roll cage kits are ideal for use with template-style or ABC bodies. They can, of course, be purchased complete—or via individual components, such as main hoop assemblies, curved door bars, and door bar spacers. This component box kit is a perfect fit with either Allstar's 54 in. or 57 in. wide offset kit frames.
( 1 )
$199.99
On Sale
Driver and spectator safety is imperative at the track, and QuickTime has the quality parts that you need to protect yourself and others. QuickTime safety shields are designed to offer excellent protection in the event of a flexplate explosion. QuickTime flexplate shields are made from durable powdercoated steel and require no transmission trimming for use. These shields meet nearly every sanctioning body's rules and are SFI 30.1 certified.
( 8 )
$181.95
When seconds count in the event of a fire, make sure that you have quick and easy access to your on-board fire extinguisher. The special design of these Rugged Ridge fire extinguisher holders incorporates thick, nylon web adjustable straps with a hook and loop fastening system to secure your fire extinguisher to the roll bar until needed.
( 18 )
$23.99
—
$35.99
SafeTBoy 2-point push button buckle lap belts offer safety every time your buckle up. These lap belts feature heavy-duty OEM-style fabric in a large selection of colors fitted with an easy-to-release buckle. SafeTBoy push button buckle belts are CAD-designed and engineered to fit comfortably across your waist. They provide the security and protection you need in your vehicle, while also being FMV-approved.
( 17 )
$48.95
—
$159.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
