Availability
Showing In Stock Items. Show All 100 Items.
Motive Gear master ring and pinion installation kits include everything that's in their regular differential kit—plus pinion shims, carrier shims, and ring gear bolts (where applicable). You also have the option of upgrading to higher quality bearings by adding "T" to the end of the part number on some models. Make a better choice for your ring and pinion installation with Motive Gear differential master bearing kits. Order the model designed for your vehicle application.
( 338 )
$87.99
—
$99.99
Yukon Gear & Axle crush sleeve eliminator kits replace your crush sleeve with a shim and spacer setup. These kits offer an economical way to enhance your setup and make it more precise. Have you ever over-tightened a crush sleeve? You toss it and start over with a new one. Yukon Gear & Axle crush sleeve eliminator kits remove the hassle—so setting preload is easier. Order the kit designed for your axle model application.
( 69 )
$55.89
—
$92.99
Spools are an alternative to a locker for traction and performance enhancement. Motive Gear mini spools are a favorite of off-road competitors. A differential with a spool setup delivers equal power and traction to both left and right-side rear wheels. Spool solutions are less expensive than lockers and weigh less. Motive Gear offers a full line of mini spools in the most popular applications for differential modification.
( 98 )
$94.99
—
$102.99
Make your differential perform even better than it did from the factory with Ford Performance Parts 8.8 in. Traction-Lok rebuild kits. They allow you to do the job right and can save you a big chunk of change by rebuilding in lieu of having to do a complete total replacement. Performance to mileage, or a little in between, no one knows how to make your Ford perform better than Ford Performance Parts, so make them your #1 source for performance parts for your Ford vehicle.
( 82 )
$92.99
Motive Gear differential bearing kits contain everything you need to install your ring and pinion. Available for front or rear axles, the kits are offered for nearly three dozen differential case design applications. Includes: * Front and rear pinion bearing * Pinion seal * Carrier bearings * Pilot bearing (depending on application) * Gear marking compound * Crush sleeve * Pinion nut * Brush * Thread locking compound * Cover gasket or RTV
( 25 )
$55.99
—
$136.99
Mile Marker Street Master lock-out hubs are perfect replacements for your worn or rusty 4WD hubs. Built to exacting standards, they mix the looks of a chrome cap with a virtually unbreakable, black nylon, reinforced-fiberglass dial and offer smooth operation. They are also available in stainless steel for select applications, and hubs are made by die-casting aluminum into pre-made stainless jackets for the ultimate combination of light weight and corrosion resistance. Need replacement 4WD hubs, replace your old hubs with ones made to be abused--Mile Marker Street Master lockout hubs.
( 8 )
$109.99
Yukon Gear & Axle offers a full line of differential covers to suit your front or rear applications. These replacement covers protect your gears, keep lubricating fluid where it's needed—and on some styles, they offer added cooling and/or strength. Their large selection affords you options of materials, sizes, and finishes to get exactly what you need. Order the model recommended for your axle, differential case design, and engine specifications.
( 66 )
$50.99
—
$106.99
Cardone products are the highest-quality new manufactured parts in the aftermarket. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their manufacturing processes can only be found behind the Cardone name. For the past 40 years, Cardone's innovative manufacturing processes have provided a high-quality, lower-cost alternative to replacement parts. Add to that a new part number release program offering the latest-model coverage, and you get a winning combination! It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot—Cardone is your one source for replacement hard parts. Additional features of Cardone new CV drive axles: * The most advanced engineering and manufacturing processes to provide you with high-technology replacement parts * Neoprene boots resist ozone, eliminating cracking, a leading cause of CV boot failure * 3 percent moly grease provides excellent high-temperature and pressure characteristics, extending the life of the joint * All axles are supplied with a new axle nut, replacing the worn or damaged existing axle nut * Rolled axle splines guarantee the proper installation of the axle into the hub and transmission * Rolled threads guarantee the proper installation of the axle nut Order the replacement model designed for your vehicle application.
( 218 )
$62.50
—
$109.99
Time, rust, and sharp or heavy objects take their toll on diff covers. Spicer Drivetrain Products genuine OE differential covers are manufactured to original standards so they fit just right every time. These steel covers include the filler plug and hardware so you can bolt them right up. Choose the cover model needed for your particular axle size.
( 6 )
$105.99
EXCel by Richmond Gear ring and pinion installation kits include all you need to help complete your ring and pinion installation. When trusting your differential refresh or new install, look to EXCel from Richmond Gear. They bring you all the reliability of the Richmond Gear name with the affordability of carefully selected quality components for your vehicle. Ring and Pinion Gear installation kit features: * High quality bearings from Koyo * Grade 8 fasteners, gaskets, seals, shims, bolts and other hardware * Gear marking compound * All-in-one packaging offers rapid installation
( 10 )
$91.99
—
$110.99
Whether starting a new project or replacing an old part, you'll find what's needed with Spicer Drivetrain Products differential carrier cases. Spicer supplies carriers to many OE manufacturers, so the replacement units are every bit as tough as the originals. They'll accept all factory and most aftermarket internal parts, allowing for modifications. Going mild or wild … Spicer Drivetrain differential carrier cases are the place to start. Order the model recommended for your vehicle and axle application.
( 20 )
$99.99
—
$103.99
4x4 Posi-Lok Perm-Lok systems permanently engage the central axle disconnect (CAD) system and couples both front axles. Once installed, the front axles will not pull until the transfer case is engaged. They are ideally suited for fleet operators, and emergency vehicles. Plus, installation is easy and can be completed in approximately 10 minutes.
( 20 )
$94.99
Rust, rocks, and road debris all take part in destroying differential covers—so Spicer Drivetrain Products introduces a line of axle-specific replacements. These kits include a new cover, plug, and installation bolts for an all-new look. They're available in a variety of materials and finishes for high strength and good looks. The differential covers are offered for the front or rear with select options for your particular application.
( 97 )
$74.99
When your vehicle's limited-slip starts acting more like an open differential, you'll need Motive Gear differential clutch packs. These composite clutches restore preload and provide minimal slip before engagement. Most packs provide factory-new hookup, but some available kits make for tight limited-slips. Whether racing, 4-wheeling, or running the streets, limited-slips provide the extra traction to get you where you want to go. Keep these units tight with Motive Gear differential clutch packs.
( 1 )
$105.99
Crown Automotive spider gear kits will help renew your turning performance. These differential gear sets are precision-made from quality materials to once again enable your vehicle to turn with ease. Spider gears, side gears, washers, and other parts that may be included in your kit selection will mesh together perfectly to create rotation inside of your differential and spin your wheels at different speeds. Restore smoother turning by installing Crown spider gear kits.
( 10 )
$99.99
—
$108.99
If it weren't for axles, the wheels on your vehicle wouldn't be moving anywhere. When those all-important parts twist, break, or have other difficulties, simply replace them with Crown Automotive direct-fit axle shaft assemblies. These assemblies are available for numerous axle types, such as CV-style, C-clip, front inner and outer, and bolt-in. While some replacement axles use hardened 4340 chromoly shafts, most are designed and steel-built to OEM specs for reliability and fitment. Each axle is engineered for its particular location and differential. Crown direct-fit assemblies cover many models of vehicles.
( 93 )
$99.99
—
$111.99
Designed for use with 1350 U-joint flanges, Ford Performance Parts Cobra pinion flanges are replacements for the original equipment. They will fit all 8.8 in. rear-drive pinions and offer a perfect fit for your Ford. Why would you go anywhere else for "Blue Oval" parts but Ford Performance Parts?
( 10 )
$56.99
BCA Bearings differential rebuild master kits consist of all the essential high-quality bearings, seals, and other key components necessary to properly complete a rebuild. With extensive coverage of popular applications, BCA differential rebuild master kits are built to meet or exceed OE specifications, ensuring long service life. Order the kit designed to fit your application.
( 6 )
$99.99
Spicer Drivetrain Products differential bearing kits will complete the parts needed to properly install your Dana Spicer ring and pinion. You can make mountains into mole hills with Spicer axle components, including their differential bearing kits. Order the model designed for your vehicle and axle application.
( 2 )
$88.99
Simplify your ring and pinion project. Ford Performance Parts ring and pinion installation kits include everything you need for changing your ring and pinion gear. All components are high-quality genuine Ford parts to ensure a hassle-free installation.
( 61 )
$55.99
Spicer Drivetrain Products front axle stubs are available for a range of applications. These quality-built steel components fit both right and left sides. When you need replacements, these front axle shafts offer a premium, competitively priced option from a name you know and trust—Spicer.
( 8 )
$61.99
—
$96.99
Motive Gear ring and pinion gear installation kits include high-quality components to complete your project. Depending on the axle application, the kits can include: a cover gasket, pinion shims, carrier shims, crush sleeve, pinion seal and nut, and ring gear bolts. Some kits also come with marking compound and a brush. To ensure proper fitment, order the installation kit designed for your specific axle model.
( 48 )
$47.99
—
$132.99
Change your automatic hubs to manual locking hubs with Mile Marker hub nut conversion kits. Kits contain nuts and locking rings that are lightweight, strong and corrosion resistant. Enhance and protect your rig's drivetrain system with Mile Marker hub nut conversion kits.
( 18 )
$66.99
—
$73.99
The CV (constant velocity) joints of your Toyota connect the drive shafts to the wheels, ensuring the wheels rotate properly when accelerating or turning corners. Protecting the joints from the elements and damage are boots. They also help keep the joints properly lubricated. All-Pro Off-Road OEM CV boot kits replace torn deteriorating boots with durable neoprene that is stronger than natural rubber, as well as flexible, weather resistant, and chemical resistant. Available in kits for inner and/or outer boot replacement, All-Pro's CV boot kits are packaged with the necessary clips, clamps, and in most all kits, packets of CV joint grease. Kits are also available with or without crimp pliers. For years of worry-free operation, select an All-Pro Off-Road OEM CV boot kit designed for your Toyota.
( 1 )
$59.99
—
$99.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
