Availability
Showing In Stock Items. Show All 47 Items.
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1960 )
$276.95
$112.95
—
$269.95
On Sale
Get some serious protection from exhaust heat by installing a set of Taylor Extreme Series Spiro-Pro spark plug wire sets. They're the finest high performance street and race wires available today. These replacement wires have maximum firepower without radio interference, and provide up to 10 times less resistance than standard resistor core wire. Spiro-Pros are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone distributor boots with grips; and ceramic spark plug boots that can withstand up to 2,000 degrees F. Taylor Extreme Series Spiro-Pro spark plug wire sets are available in multiple terminal and boot end options, as well as your choice of colors.
( 26 )
$149.05
—
$160.20
$134.14
—
$144.18
Dress up your engine compartment and organize your plug wires all in one fell swoop with these Billet Specialties billet wire looms. Their stout aluminum construction showcases a mirror-polished finish and either plain or various machined top designs. Their 2-piece design features adjustable tabs that attach to the base of the valve covers via their mounting bolts.
( 103 )
$109.95
—
$136.95
E3 DiamondFIRE heat-sleeved racing ignition wires boast a proprietary design that will help put you in victory lane. Featuring angled boots and full heat sleeving, these wires are engineered to work in concert with E3's patented DiamondFIRE spark plugs for maximum spark and more power. Order the wires recommended for your vehicle and engine application. Features include: * Class F40 spiral conductor * Rated at 40 ohms per foot * Impregnated with Ferrite, an iron alloy that improves magnetism * 8.5mm 100 percent silicone outer jacket encases a 100 percent silicone inner jacket with stainless steel locking terminals * Unique E3 design: Rock-solid, braided Aramid base core, and Carblex outer core—which make up part of the DiamondFIRE Tri-Core; nickel copper alloy conductors for exceptional spark energy transfer
( 14 )
$144.99
—
$149.99
On Sale
ACCEL Extreme 9000 ceramic wires are the cure for burnt spark plug boots. These wires provide excellent energy delivery while providing the highest level of RFI/EMI suppression. They're ideal for custom engines, boats, and RVs—plus great trackside accessories when you need to make up a replacement wire. ACCEL Extreme 9000 ceramic spark plug wire sets are available straight or in right-angle configurations. Order the set recommended for your vehicle and engine application. More product features include: * Finished with stainless steel spark plug terminals and ceramic spark plug boots * Each wire features ultra-high temperature double silicone wire rated at 600 degrees F * Ferro-Spiral core wire developed for performance use * Capable of withstanding up to 2,000 degrees F
( 462 )
$263.15
$120.95
—
$224.95
Special Offer
Moroso new Ultra 40 Race ignition wire sets are the most powerful and RFI/EMI-resistant wires available for racing today. Features of these 8.65mm wires include a Kevlar® core that's four times stronger than Aramid cores, a class-leading 40 ohms of resistance per foot, nickel copper alloy conductors for superior spark energy transfer, an extra-thick EPDM layer for greater dielectric strength, high-temperature silicone boots that can withstand heat up to 600 degrees, and locking stainless steel plug terminals. Plus, their closely woven fiberglass, silicone-impregnated insulation provides up to 8,000 extra volts of protection, and their extra-thick diameter extends wire life by adding additional insulation against heat, chaffing, and contaminants.
( 133 )
$246.82
—
$268.99
R&M billet wire looms use injection-molded insulators anchored to stylish billet aluminum brackets with recessed socket head cap screws to hold your plug wires. Not only does this setup look great, but it also allows you to route your wires away from exhaust heat without worrying about them coming loose. They're made for a variety of engines and are available in a wide range of colors and finishes. Features include: * Quality-machined 1/8 in. billet aluminum * Specifically designed for each application * Heat-resistant, glass-filled polyester, non-conductive clamps included * Limited lifetime warranty
( 503 )
$101.99
—
$162.99
Special Offer
The new standard in ignition wires for racers on a budget! Moroso Ultra 40 unsleeved custom-fit ignition wire sets are the most powerful and RFI/EMI-resistant wires available for racing today. Plus, their closely woven fiberglass, silicone-impregnated insulation provides up to 8,000 extra volts of protection. Features: * Kevlar® core that's four times stronger than Aramid cores * Class-leading 40 ohms of resistance per foot * Nickel copper alloy conductors for superior spark energy transfer * Extra-thick EPDM layer for greater dielectric strength * High-temperature silicone boots that can withstand heat up to 600 degrees * Locking stainless steel plug terminals
( 138 )
$103.99
—
$128.99
Granatelli spark plug wires utilize an exclusive solid stainless connector cable with stainless snap-lock spark plug connectors and a patented EMI/RFI protection ring. This helps them exhibit near 0 ohm resistance, with RFI/EMI outputs less than OE. These kits increase power to the spark plug by up to 25 percent over stock, and their high-temperature silicone boots resist temperatures of up to 500 degrees F. They're ideal for use with aftermarket headers and turbocharger systems, and installation is as easy as changing the factory units. The assembled wires are engineered to exceed OEM specifications and to be OBD-II computer safe. Order the set designed for your vehicle application.
( 55 )
$105.74
—
$271.32
On Sale
MSD Race Tailored Super Conductor sleeved spark plug wire sets are equipped for the harshest race conditions. These ultimate performance 8.5mm wires combine extremely low resistance with the ability to suppress electromagnetic interference. They now come outfitted with high-temperature, silicone-fiberglass sleeving that protects wires up to 1,000 degrees F! MSD offers their Race Tailored Super Conductors with socket-type or HEI ends for routing under exhaust or over valve covers. Order the set recommended for your vehicle and engine application.
( 13 )
$299.95
$164.95
—
$261.95
You need a good spark to make good energy and power. Davis Unified Ignitions LiveWires are spark plug wires that deliver the spark that you need for the energy that you want. Made with space-age, non-flammable, heat-treated glass braid, LiveWires provide heat protection up to 1,400 degrees F and offer excellent resistance to moisture and chemicals. They feature a spiral-core stainless steel wire wrapped around a magnetic core, offering extremely low-ohm resistance for optimum spark travel. And there is no radio interference, enabling them to work well with delay boxes and stutter boxes. LiveWires have a durable silicone jacket and insulation with heat-shrink applied between the boot and sleeving to keep dirt and moisture away from the wire terminals. Another excellent feature of these custom-fit, ready-to-go wires is that they're foolproof. Each wire is numbered on both ends for the correct cylinder—making installation, removal, and reinstallation hassle-free. LiveWires are available in eye-catching colors to match the sparking power that they provide. Quality wires are more than just wire and coverings. Make sure that you're wired to fire with LiveWires from Davis Unified Ignition and Performance Distributors.
( 462 )
$139.00
—
$189.00
On Sale
Bigger, better wire! Taylor 409 Race-Fit Pro Race spark plug wires start with Taylor's 8mm wires (available in spiral-wound or solid core) with a silicone inner insulator, fiberglass braid, and a 100 percent pure silicone jacket. Then they add a heat-treated fiberglass mesh skin and a third layer of pure silicone to get a full 10.4mm diameter. Taylor bonds pure silicone boots directly to the wires. The results are wires that have a 100,000+ V dielectric strength rating that gets more spark to your plugs.
( 157 )
$179.30
$148.66
—
$161.37
Proform's GM licensed Chevrolet linear wire looms use the valve cover mounting bolts to position them along the valve cover to hold the wires in a neat parallel arrangement. They feature a handsome chrome finish with an epoxy-coated Bowtie emblem that is centrally located for maximum visibility. The wire holders are opened and closed with a patented nylon wedge to permit the chrome tops to have a smooth surface free of screw heads.
( 31 )
$114.95
On Sale
Taylor 409 Pro Race Spiro-Wound core spark plug wires are high-tech, high performance wires available for the street or track. They provide continuous heat protection up to 600 degrees F and 102,000 V of dielectric strength. A tightly woven, heat-treated fiberglass braid is applied over 100 percent pure silicone 8mm ignition wire. These sets are available in black, red, and blue with color-coordinated, 100 percent silicone Pro Boots bonded to the wires. They also feature vibration-proof, double spring locking plug terminals. The Spiro-Wound core is for use when RFI suppression is required for maximum firepower without radio interference. Taylor 409 spark plug wires are a must for multiple discharge ignition systems, onboard computers, and electronic ignitions. Order the set and options designed for your vehicle and engine application.
( 301 )
$161.75
—
$179.30
$145.58
—
$161.37
Scott Performance high performance spark plug wire sets feature 10mm 30 ohm fiberglass jacketed wire with helically wound alloy cores. The plug/distributor boots are high-temp silicone materials and the terminals are stainless steel. All spark plug wire sets are handmade and individually tested to assure quality and performance. They're available in different colors and multiple configurations to provide the perfect fit for your engine. Order the spark plug wire set suited for your application.
( 46 )
$151.53
—
$208.69
Special Offer
Moroso ready-to race wires are designed to be taken out of the box, plugged in, and raced. Each wire has numbered tags to identify cylinders and simplify installation. They're preterminated at both ends with the correct terminals and boots. They also have an insulated sleeve that runs the entire length of the wire and shrink tubing to seal the boots.
( 6 )
$234.99
—
$236.99
Ford Performance Parts custom billet wire looms not only look good, but will protect your wires, too. They keep all of the wires neat and away from the headers, and are adjustable to fit most Ford V8 engines. The looms feature a billet aluminum construction with a number of available ball milled logos. Features include: * Fit 8mm and 9mm wires * Keep all wires neat and away from headers * Adjustable brackets fit all big and small block engines except FE series * Use with universal spark plug wires
( 8 )
$132.99
Allstar Performance has a wide selection of items to assist with your building project including Race spark plug wire sets. Regardless of whether your venue is the track, open wheel, off-road pulling, tractor pulling, Drag race, hot rod, or road race, Allstar Performance is sure to have the performance parts and accessories that you need to help get you to the winner's circle.
Not Yet Reviewed
$144.99
These Ford Performance Parts spark plug wire sets feature a spiral-wound suppression core for low resistance and minimum spark loss. They have tough silicone insulation to withstand high temperatures and voltage loss for minimum crossfire, and are highly resistant to fuels, oils, and solvents. Other features include 45 degree plug boots (most applications), stainless steel distributor cap terminals, and a coil wire (if applicable).
( 699 )
$116.99
—
$117.99
These Chevrolet Performance spark plug wires exhibit only 600 ohms/ft. of resistance, with high noise suppression capabilities. They feature red or black silicone 8mm outer jackets with a white Chevrolet Performance Parts logo and black boots on both ends. These Chevrolet Performance spark plug wires are manufactured with double-wall silicone construction by Packard Electric to meet Chevrolet Performance specifications.
( 1 )
$153.91
Special Offer
Who said high quality and high performance can't be cost effective? Moroso Ultra ignition wire sets are equal to or exceed OEM specifications, depending on the application, without the dealer prices. Moroso has more than 50 years of experience in supplying spark plug wires to the top teams of NASCAR and NHRA, as well as auto manufacturers. These sets are available in different thicknesses and colors, assembled or not, with multiple boot end angles. Some models include high temperature sleeves. Order the ignition wires recommended for your application.
( 60 )
$161.99
—
$162.99
On Sale
ThunderVolt 8.2mm wires from Taylor are an easy, proven, dyno-tested way to gain more power—simply by changing your spark plug wires! These factory replacement, ultra-high performance ignition wire sets are loaded with features and benefits, including: * 50 ohms of resistance per foot * 100 percent silicone 2-layer jacket * Ferrite spiral-wound coated core * RFI and EMI-compatible for all ignition systems * Dyno-tested to outperform the competition * Superior spark energy * Increased horsepower * Significant torque gains * Smoother idle * Improved fuel economy * Universal, race, and custom fit sets available
( 647 )
$113.50
—
$226.50
$102.15
—
$203.85
Summit Bucks
ACDelco spark plug wire sets meet or exceed original equipment specifications for fitment and performance. They're made from top-quality materials, so you know they'll last. The assembled ignition wires are available with different terminal ends and boot ends. Over 700 sets are available to cover virtually any vehicle on the road today. Order the spark plug wires recommended for your application.
( 150 )
$108.99
—
$122.99
On Sale
Taylor Spiro-Pro Race-Fit Spiro-Wound core spark plug wire sets outperform the competition in both looks and performance at a price that you can afford. According to Taylor, Spiro-Pro is simply the best high performance 8mm wire you can buy and is a perfect choice for your race or street car. Their Spiro-Wound core is designed for use when RFI suppression is required for today's complex multiple spark discharge systems. Spiro-Pro features two layers of 100 percent silicone to withstand temperatures of up to 600 degrees F without the need for additional sleeving. Each wire is preterminated to a specific length—and features Taylor's all-silicone Pro Boots with double spring-locking spark plug terminals. They're available in a choice of colors. Order the set and options designed for your vehicle and engine application.
( 111 )
$179.30
$161.37
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
