Availability
FFP Customs bolt-in adjustable pedal assemblies are designed to allow drivers to position themselves in the car for optimal safety and comfort. This design also allows the driver to be placed where it benefits the weight balance; moving weight in the car can be a great tuning tool. These assemblies allow a driver of any height and stature to move the throttle, brake, and clutch (where applicable) pedals individually to suit their needs. All pieces of the kits are made of 6061 aluminum, providing for optimum strength while maintaining lightweight parts. The sleek design of the master cylinder and brake lines being mounted under the dash helps clean up the engine bay and leave more room for accessibility to the engine and other engine combinations. Each FFP kit uses factory mounting points, allowing for an easy bolt-and-go install; no fabrication work or welding is required. Kits are available with brake/throttle pedals, or brake/throttle/clutch pedals. The assemblies will fit a variety of Mustang applications from the 1970s, '80s, and '90s. BRAKE details: * Moving the pedal pad on the brake pedal will allow you to change the pedal ratio -- The lowest position is 6:1 -- The middle position is 5.5:1 -- The highest position is 5:1 * When moving the brake pedal backward and forward, the master cylinder moves with the pedal; therefore, you won't need to change the pushrod attached to the pedal and master cylinder. They will move as one unit. * 1 5/8 in. billet reservoir tube mount * The pedal pad height resembles the stock location * Kits utilize a Wilwood remote tandem master cylinder kit. * Pedal attaches to the master cylinder using a 3/8 in. Heim joint and 3/8 in. shoulder bolt * The pedal pivot utilizes two bronze oil-impregnated bushings * All of the mounting hardware is Grade 8 THROTTLE details: * The pivot utilizes bronze oil-impregnated bushings * There are three pivot locations * Units are designed to be used with Lokar throttle cable * The throttle stop is preset wherever you move the pedal; the stop travels with it. * The throttle firewall mount sets the cable in line with the pedal * Wide Open Throttle switch available upon request CLUTCH details (available on assembly models that include a clutch pedal): * Moving the pedal pad on the clutch pedal will allow you to change the pedal ratio.\ -- The lowest position is 6:1 -- The middle position is 5.5:1 -- The highest position is 5:1 * When moving the clutch pedal backward and forward, the master cylinder moves with the pedal; therefore, you won't need to change the pushrod attached to the pedal and master cylinder. They will move as one unit. * Kits include reservoir-mount spacers to accommodate the added clutch master cylinder reservoir * The pedal pad height resembles the stock location * Kits utilize a Wilwood remote single master cylinder kit * Pedal attaches to the master cylinder using a 5/16 in. Heim joint and 5/16 in. shoulder bolt * The pedal pivot utilizes two bronze oil-impregnated bushings * All of the mounting hardware is Grade 8 * By having the master cylinder mounted directly to the pedal, this allows for a quick return of the pedal upon release * Kit comes with a neutral safety switch and mount * On the neutral safety switch mount, a throttle cut-off switch can be added upon request.
Not Yet Reviewed
$1,600.00
—
$2,000.00
Ford Performance Parts Z-Series aluminum cylinder heads provide increased intake and exhaust airflow and are available for Ford small block Windsor engines. They were designed using solid modeling technology from prime A356 T-6 aluminum and feature high-flow ports, steel alloy intake and exhaust valve seats, and manganese-bronze valve guides. Ford Z-Series heads accept both tapered seat and gasket-style 14mm spark plugs and are available as-cast or CNC-ported, both bare and assembled. Select heads are also offered with advanced "Velocity Vane" intake port design that delivers outstanding street/strip power. Developed with advanced computer-aided engineering simulation tools, their unique intake port design improves power throughout the rpm range. Velocity Vane cylinder heads are a direct bolt-on and retain OEM exhaust, intake, rocker arm, and accessory mounting locations. Features include (some vary depending on version): * A variety of combustion chamber volumes * Cast with high-flow ports * 20 degree inline valves * Steel alloy intake and exhaust valve seats * 7/16 in. screw-in studs (not included on bare heads) * Requires 1.5:1 ratio roller rocker arms with .150 in. offset intake pushrod cup (not included) * Assembled heads include laser-cut guide plates for 5/16 in. pushrods and 7/16 in. rocker studs * Premium stainless steel intake and exhaust valves (with assembled heads) Notes: * As-cast bare heads require competition valve job and bowl blending * Custom headers may be required for heads with raised exhaust port exits * Check intake manifold for port match; not all intakes are compatible due to the tall high-flow ports (does not fit M-9424-Z51/-Z51P) * Check piston-to-valve clearance, including radial valve clearance, before installing
( 1 )
$1,638.99
—
$1,705.99
Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque
( 9 )
$1,576.75
Pedders' renowned expertise plus advanced technology equals XA Extreme coilover kits that let you click, tune, and play! These height-adjustable coilover shocks are built to Pedders' stringent quality standards. They feature sports-calibrated tunable damping, motorsports coil springs individually tuned to suit each application, and a host of other high performance features—including engineered mounting bracketry. Plus, shocks have a 30-position adjustable bump and rebound damping setting which offers a fine-tuned suspension that's ready to play with just a click of a button. For the performance enthusiast, Pedders XA Extreme coilover kits are a great fit. Order the kit designed for your vehicle application.
( 13 )
$1,529.96
McLeod aluminum bellhousings are not lightweights when it comes to accuracy and compact performance. They're constructed of aluminum—with a narrow body design for lightness, and a steel inner liner for added strength and protection. The innovative mounting plate is interchangeable to accommodate different transmissions. McLeod aluminum bellhousings will fit a wide range of vehicle, engine, and transmission applications, dating as far back as the 1950s.
( 1 )
$1,525.00
Drivers need a clutch that offers smooth engagement, quiet operation, light pedal effort, and high-end holding capacity. Centerforce DYAD drive system multi-disc kits offer that, and more. These kits are designed and developed to meet the needs of modern high-end vehicles. This technology allows engine torque levels to exceed 750 lb.-ft. and still be driven every day. Take your vehicle to the next level in high performance with DYAD DS multi-disc clutch kits and feel the difference!
( 1 )
$1,816.95
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 103 )
$1,699.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
