Availability
Showing In Stock Items. Show All 372 Items.
ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires
( 8 )
$3,625.99
COMP Cams is bringing the muscle car sound back, and it's nastier than ever! Let's face it--few things serve to grab our attention at a car show or cruise night more than a car with a thumping, high performance idle. In an ongoing quest to provide you with the performance and sound you demand, COMP Cams engineering team proudly introduces the Thumpr Series cam and lifter kits. The lobe profile and grind characteristics of these Thumpr camshafts use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize the rough-idling characteristics of the cams. This gives you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. Thumpr camshafts are available in different grind profiles; each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. Thumpr Series cam and lifter kits deliver a substantial power increase over an identical hydraulic flat tappet grind without sacrificing reliability or ease of maintenance.
( 212 )
$589.95
—
$639.95
Summit Racing™ OE-style harmonic dampers are ideal for those mild street rebuilds that don't require the expense of a high-buck race damper. They feature durable nodular construction with bonded elastomer between the inner and outer rings. The balancers also have engraved timing marks, which means no timing tape! Summit dampers are available in a variety of sizes for many engine balance applications. Models are available for hundreds of vehicles; order the OE replacement recommended for your ride.
( 667 )
$71.99
—
$87.99
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 357 )
$53.99
—
$185.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 69 )
$68.99
—
$76.99
You don't have to sacrifice safety or quality to save money; our affordable Summit Racing™ bracket racer SFI dampers have been spin-tested to 12,500 rpm and carry an SFI-18.1 rating. The carbon steel dampers have an injection-molded and bonded elastomer, easy-to-read engraved timing marks, removable counterweights (where applicable), and a highly polished baked-enamel finish, so they look as good as they perform.
( 390 )
$161.99
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 19 )
$17.99
—
$24.99
Give your truck a breath of fresh life with ATK High Performance GM 350 TBI 290 hp Stage 1 long block crate engines. These engines are designed to replace your old tired mill with a fresh unit that has a little bit more kick. These engines feature upgraded internals to help them pump out 290 hp and 370 ft.-lbs. of twist that will get your pickup or muscle truck moving. ATK GM 350 TBI 290 hp Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * OE cast iron TBI cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
( 6 )
$3,034.99
Patented ATI Super Damper standard harmonic balancers are the only crankshaft dampers designed exclusively for high performance engines. Inner and outer shells are available in aluminum or steel, and contain a steel inertia weight. The inertia weights have six (2-ring design) or eight (3-ring design) computer-machined grooves to retain the proper durometer O-rings (dyno tested for each application). Whether you race or just drive on the street, ATI harmonic balancers are the perfect choice. Features include: * Eliminates torsional crankshaft vibrations * Exceeds SFI 18.1 specs * Black zinc chromate finished * OEM equipment on a variety of crate engines * Tunable, rebuildable, and extremely efficient at all rpm * Laser-engraved 360 degree timing marks * Supercharger and power steering drive pulleys available for some applications
( 235 )
$309.95
—
$414.50
PROMAXX Performance designed and developed these cylinder heads from the GM 6.5 diesel casting. They are cast iron direct bolt-on replacements for your 6.5L diesel engine. The assembled heads have straight intake bolt holes in the cylinder head, and will typically use a one-piece intake manifold. Order the model recommended for your Chevy or GMC truck.
( 8 )
$538.00
Sealed Power Performance piston rings are made from ductile iron, and compression rings are available with moly, chrome, and plasma-moly facings for extra durability. These OE-quality sets will seal mild- to high-compression engines and help protect against oil blowby. They feature standard ring end gaps for easy installation. Find the bore dimension and ring thicknesses needed for your application.
( 320 )
$43.99
—
$120.99
These Summit Racing™ remote oil filter kits include a bypass adapter, filter mount, 8 ft. of oil hose, barb fittings, stainless steel hose clamps, mounting hardware, and instructions. These kits require a Fram PH8A or equivalent oil filter, which is not included.
( 188 )
$60.99
—
$74.99
WIX has the lowdown on dirt, and their Racing oil filters are ready to trap more dirt--45 percent more! Your engine needs lots of clean oil to get you across the finish line first, and WIX has spent years of researching the effects of racing on filters, and decades of manufacturing the best, to gain true distinction in all types of racing. These oil filters feature special glass-enhanced media to catch dirt particles without restricting oil flow to your hungry powerhouse. Plus, a strong steel perforated spiral center tube keeps the flow moving and has the highest collapse strength in the industry. WIX Racing oil filters have a heavy-duty can and cover to handle the stress of racing, and some filters include anti-drainback and filter bypass valves. If you're a serious racer, these track-proven filters are your ultimate choice. Guard your engine from power-robbing dirt with WIX Racing oil filters. These filters are designed for racing use only--not for street use.
( 116 )
$15.99
—
$16.99
These Proform Super-Street roller rocker arms will help rid your engine of internal friction. They feature a race-proven, cage bearing fulcrum and roller tip. The Super-Street rocker arms not only unleash horsepower, but they also lengthen valvetrain component life and reduce wear and tear on valve stem tips. Proform rockers are precision-machined to ensure consistency and ratio accuracy, and they have a great looking anodized finish.
( 127 )
$189.99
—
$289.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 138 )
$81.99
—
$111.99
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 253 )
$44.99
—
$126.99
Smoother, tighter, and quicker--Melling Shark Tooth oil pumps utilize helical asymmetrical technology to improve the heartbeat of the traditional internal gear pump. The use of this new gear design feeds your engine an increased flow of oil without the usual pulsing. How much more? About 10 to 25 percent more volume! Equip your setup for a powerful bite of high performance; install one of these Melling Shark Tooth oil pumps. Melling Shark Tooth pumps are: * Smoother--significant reduction in pressure ripple (pulsing) also means a reduction in torque ripple in pump drive, improved distributor operation, a reduction in spark scatter, and improved distributor gear wear and intermediate shaft wear * Tighter--improved sealing of gear tips to housing provides reduced internal leakage and improved efficiency and performance * Quicker--increased inlet vacuum equals faster primes
( 43 )
$119.99
—
$446.99
If the time has come to replace your tired old small block Chevy, then look no further than a VEGE Chevrolet 350 c.i.d. remanufactured long block crate engine. These long blocks are an excellent foundation for budget-minded builds, are a drop-in replacement for many 1987-95 GM vehicles—and can also be retrofitted into nearly any vehicle. VEGE Chevrolet 350 c.i.d. remanufactured long block crate engines create great low-end power, making them perfect for cruisers, street rods, trucks and even your daily driver. They can produce 250 horsepower and 350 ft. lbs. torque when equipped with 600CFM carburetor and a dual plane 4-barrel intake manifold. VEGE Chevrolet 350 c.i.d. remanufactured long block crate engines feature: * Remanufactured 2-bolt main cast iron engine block * Cast crankshaft * Cast connecting rods * 12.3cc Dish hypereutectic pistons * 8.5:1 Compression ratio * Cast iron cylinder heads with 76cc combustion chambers * 1.94 in. Intake valves, 1.50 in. exhaust valves * Standard small Chevy exhaust bolt pattern * Uses standard 14mm x 1.25 thread, taper seat, 0.441 in. reach spark plugs * Hydraulic flat tappet camshaft * 0.383 in. Intake lift, 0.401 in. exhaust lift * Duration at 0.050 in. lift 194 int./202 exh. * 112 degree lobe separation * Oil pan with passenger side dipstick * Steel timing cover * Steel valve covers Drop-In replacement applications: * 1990-92 Cadillac Brougham * 1987-94 Chevrolet Blazer * 1988-95 Chevrolet C1500 * 1992-95 Chevrolet C1500 Suburban * 1988-95 Chevrolet C2500 * 1992-95 Chevrolet C2500 Suburban * 1988-95 Chevrolet C3500 * 1989-89 Chevrolet Caprice * 1987-95 Chevrolet G10 * 1987-95 Chevrolet G20 * 1988-95 Chevrolet K1500 * 1992-95 Chevrolet K1500 Suburban * 1988-95 Chevrolet K2500 * 1988-95 Chevrolet K3500 * 1987-89 Chevrolet P20 * 1988-95 Chevrolet P30 * 1987-87 Chevrolet R10 * 1987-88 Chevrolet R10 Suburban * 1989-91 Chevrolet R1500 Suburban * 1987-88 Chevrolet R20 * 1987-88 Chevrolet R20 Suburban * 1989-89 Chevrolet R2500 * 1989-91 Chevrolet R2500 Suburban * 1989-91 Chevrolet R3500 * 1995-95 Chevrolet Tahoe * 1987-87 Chevrolet V10 * 1987-88 Chevrolet V10 Suburban * 1989-91 Chevrolet V1500 Suburban * 1989-91 Chevrolet V2500 Suburban * 1989-91 Chevrolet V3500 * 1989-95 GMC C1500 * 1992-95 GMC C1500 Suburban * 1989-95 GMC C2500 * 1992-95 GMC C2500 Suburban * 1989-95 GMC C3500 * 1987-93 GMC G1500 * 1987-95 GMC G2500 * 1988-95 GMC G3500 * 1987-91 GMC Jimmy * 1988-95 GMC K1500 * 1992-95 GMC K1500 Suburban * 1988-95 GMC K2500 * 1988-95 GMC K3500 * 1988-89 GMC P2500 * 1989-95 GMC P3500 * 1987-87 GMC V1500 * 1987-91 GMC V1500 Suburban * 1987-87 GMC V2500 * 1987-91 GMC V2500 Suburban * 1987-91 GMC V3500 * 1993-95 GMC Yukon
( 25 )
$2,899.99
Increase your street machine's gas mileage and powerband performance! COMP Cams High Energy cam and lifter kits are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These kits offer good increases in both gas mileage and power throughout the rpm range for most street applications.
( 184 )
$305.95
—
$518.95
For maximum performance and durability on the street or at the track, trust Fram HP Series oil filters. They offer twice the oil flow rate and four times the dirt-holding capacity of standard oil filters. Their extra-thick steel cans and heavier gauge tapping plates are designed to withstand the high pressures and flexing caused by demanding driving conditions. Tough steel end caps hold a spiral-shaped center tube to offer more durability and protection against collapse. Fram HP Series oil filters are compatible with all oil types and have been optimized for racing and high performance street cars. Additional features include: * Low-restriction racing media designed for high oil flow * 94 percent efficiency at 20 microns * Silicone anti-drainback valve on many applications * 10 to 18 gpm recommended maximum oil flow, depending on model * Maximum burst pressure: 350 to 500 psi, depending on model * Maximum operating pressure of 200 psi * Screen over bypass valve for extra protection against large contaminants * High-flow bypass valve * Flanged steel end caps
( 124 )
$16.99
—
$23.99
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 36 )
$60.99
—
$75.99
Sealed Power hydraulic lifters are precision-manufactured to maintain precise valve timing under all operating conditions. A patented constant orifice metering valve provides precise oil metering to the overhead valvetrain, and longer plungers or pistons provide increased bearing surfaces, resulting in longer lifter life. Their check valves are lightweight flat discs, allowing for higher speeds and more uniform operation than competitive lifters.
( 54 )
$7.99
—
$15.99
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 167 )
$1,079.50
—
$1,252.50
Clevite camshaft bearings are manufactured to meet or exceed OEM parts when it comes to strength and durability. They will help to give your motor extra life, and their quality construction and superior materials will help to protect your vital engine parts from the harmful effects of friction. With thousands of applications, you're sure to find the bearings you need for your motor.
( 188 )
$33.99
—
$74.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
