Selected Filters


Loading...

Availability


1995 ACURA INTEGRA Parts and Accessories

Part Groups

Results 1 - 24 of 183

Aeromotive Stealth 340 In-Tank Electric Fuel Pumps

Stealth 340 pumps are high-output, in-tank, electric fuel pumps for fuel injected and carbureted applications. At a volume rate of 340 liters per hour. These universal pumps bolt into many existing hanger assemblies, and are a direct fit upgrade for many OE applications. These pump will support up to: * 1000 HP (carbureted/naturally aspirated) * 850HP (carbureted/forced induction) * 850HP (EFI/naturally aspirated) * 700HP (EFI/forced induction) * 700HP on E85 (carbureted/naturally aspirated) * 595HP on E85 (carbureted/forced induction) * 595HP on E85 (EFI/naturally aspirated) * 490HP on E85 (EFI/forced induction)

4.35 out of 5 stars ( 17 )

$146.99

On Sale

AEM Electronics High-Flow In-Tank Electric Fuel Pumps

These AEM Electronics high-flow in-tank electric fuel pumps are designed for high performance, naturally aspirated, and forced induction EFI. They deliver reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The pumps include a rubber sleeve, end caps, a prefilter, hose, clamps, and flying lead.

4.54 out of 5 stars ( 50 )

$131.35

Derale Engine Oil Filter Relocation Kits

Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.

3.87 out of 5 stars ( 39 )

$104.38

$112.40

AEM Electronics Billet Adjustable Fuel Pressure Regulators

These billet aluminum AEM Electronics fuel pressure regulators can support engines of up to 1,000 hp. Featuring replaceable discharge ports to match your fuel pump output, they're adjustable from 20 psi up to the maximum pump capacity rating. AEM Electronics billet adjustable fuel pressure regulators are available in a variety of colors for a variety of applications.

3.8 out of 5 stars ( 15 )

$149.95

Vision Street Designs 426 Cross Series Gunmetal Wheels

When it comes to strong wheels for your car, it's hard to beat the 426 Cross Series from Vision Wheel. Their split 7-spoke design is set apart by the dimensional, beveled-look window edges. The 14 contact points between the center hub and the outer edge of the lip provide structural integrity while reducing wheel fatigue. These one-piece aluminum 426 Cross Series wheels are finished in a glossy gunmetal gray coating, and include a stylish Vision center cap. With a trendy set of wheels this attractive, it's hard to say whether your car will draw more attention cruising around town … or simply parked in the driveway! Vision Street Designs 426 Cross Series wheels are available in many sizes and bolt patterns to gain the perfect fit for your vehicle.

5.0 out of 5 stars ( 6 )

$100.99

$105.99

WeatherTech Seat Protectors

WeatherTech seat protectors are the perfect accessory for owners needing protection for their front and rear vehicle seating. These seat protectors are made from a poly/cotton twill fabric with a durable water-repellent finish that will combat any juice box spill, cereal crumbs or pet mess! They also feature an extra-layer of nylon lining to further protect the covered seat(s). Additional features of WeatherTech seat protectors include: * Semi-custom to fit the size and type of most year 2000 vehicles * Fits most bench and bucket-style front and rear seats * Quick and easy installation, as well as easily removable for cleaning * Stays in place with durable straps, specialty inserts and a non-slip bottom * Seat protector is machine washable and reusable Please note: you must have a headrest on the seatback of your vehicle for the WeatherTech Seat Protector to strap on to. Also keep in mind, if your vehicle is equipped with a center seatbelt, it will not be accessible with installation of the seat protector.

4.36 out of 5 stars ( 11 )

$161.95

McGard Spline Drive Lug Nut Installation Kits

McGard spline drive lug nut installation kits offer you choices to match your style. You can coordinate, complement, or contrast--it's your choice! Everything you need to install your wheels is included in these high-quality McGard spline drive lug nut installation kits. Show your individuality with a variety of colors and styles. Imagine the possibilities with McGard spline drive lug nut installation kits.

4.96 out of 5 stars ( 47 )

$149.99

Maradyne Champion Series Electric Fans

Maradyne Champion series electric fans are great for use on remote transmission coolers, oil coolers, or intercoolers. They feature a reversible motor, so they can be used as a puller or pusher type, depending on your space constraints. They use sealed motors, perfect for harsh conditions, including off-road, and they can be sprayed clean without moisture entering the motor. The Maradyne Champion series electric fans have a glass-filled nylon shroud and blade and are high-temperature and impact-resistance for harsh underhood temperatures and greater resistance to flying road debris.

4.83 out of 5 stars ( 64 )

$129.14

$130.38

Vision Street Designs 426 Cross Series Matte Black Wheels

When it comes to strong wheels for your car, it's hard to beat the 426 Cross Series from Vision Wheel. Their split 7-spoke design is set apart by the dimensional, beveled-look window edges. The 14 contact points between the center hub and the outer edge of the lip provide structural integrity while reducing wheel fatigue. These one-piece aluminum 426 Cross Series wheels are finished in a rich matte black coating, and include a stylish Vision center cap. With a trendy set of wheels this attractive, it's hard to say whether your car will draw more attention cruising around town … or simply parked in the driveway! Vision Street Designs 426 Cross Series wheels are available in many sizes and bolt patterns to gain the perfect fit for your vehicle.

5.0 out of 5 stars ( 4 )

$100.99

$105.99

Konig Helium Matte Silver Wheels

Konig Helium matte silver wheels offer 8-spoke tuner style. These lightweight wheels have found their way on to countless vehicles, looking great on all of them. Produced in a sleek matte silver, Konig's Helium offers an affordable, stylish wheel option for 4 x 100 fitments.

4.5 out of 5 stars ( 2 )

$142.99

Konig Helium Matte Black Wheels

Konig Helium matte black wheels offer 8-spoke tuner style. These lightweight wheels have found their way on to countless vehicles, looking great on all of them. Produced in a deep matte black, Konig's Helium offers an affordable, stylish wheel option for 4 x 100 fitments.

5.0 out of 5 stars ( 2 )

$134.99

MotoRad Cooling System Pressure Testers

Test your cooling system's pressure with these accurate testers from MotoRad. These testers will test today's higher pressure cooling systems and pressure caps up to 30 lbs. The gauges test pressure ranges of 17 to 19 lbs., 20 lbs., and 28 to 30 lbs., with a color-coded dial that makes it simple to accurately test higher pressure caps and systems. A pressure release bar releases pressure buildup before removing the head from the neck. These MotoRad cooling system pressure testers come in a plastic carrying case with an easy-to-use instruction manual.

5.0 out of 5 stars ( 2 )

$106.99

ACL Performance Race Series Performance Oil Pumps

The ACL Race Series performance oil pumps have been meticulously engineered to meet the demanding needs of high-performance engines operating at high rpm's. These ACL Race Series oil pumps are designed with high output and high volume capabilities. Gerotor sets are precision-machined from copper alloy. Tight tolerances assure optimum pressure flow. Each Race Series performance oil pump has been individually inspected and tested to assure pressure and flow characteristics. Select the ACL Race Series performance oil pump that is better suited for your application needs.

Not Yet Reviewed

$144.99

Radium Engineering Fuel Pump Hangers

Radium Engineering fuel pump hangers permit the use of one, two, or three aftermarket pumps in the stock MK4 Toyota Supra (JZA80) fuel tank. Features include: * Drop-in OEM replacement * 8 AN male pump outlet * 6 AN male return inlet * Fuel starvation protection * High current electrical hardware * Compatible with various pumps (Walbro, AEM, etc.) * Anodized aluminum construction To simplifying aftermarket -AN hose plumbing, the 10 AN ORB threaded feed port features a low-profile 8 AN male fitting, and the 8 AN ORB threaded return port features a low-profile 6 AN male fitting. To reconnect the OEM return and vent hoses, 8.5mm barb fittings are also included. No permanent modification to the OEM fuel tank access cover is required. The custom designed stainless electrical studs easily handle the high current demand that compact bulkhead connectors lack. These serviceable connections are properly sealed and impervious to all standard and exotic fuels. The low-profile design keeps all wiring tucked nicely underneath the OEM fuel tank cover using the provided foam insulation. Nonconductive acorn nuts are provided to prevent any accidental short circuits. The high quality in-tank wiring is insulated with chemically resistant ETFE. Electrical hardware is included for the fuel pump(s), OEM level sender, and OEM temperature sensor. One issue with all Supra fuel pump hangers is the lack of fuel starvation protection. In these kits, the flow from the FPR return line powers a Radium jet pump. Using a venturi-effect, this "mechanical" pump draws fuel from outside the sub-tank and distributes it directly to the pump inlets.

5.0 out of 5 stars ( 1 )

$218.45

$232.70

System 1 Spin-On Oil Filters

System 1 has eliminated the need for disposable oil filters. Built from durable anodized aluminum housing, System 1 filters feature a washable, stainless steel element that can be used over and over again. They can be completely disassembled for inspection, revealing metal shavings and residue that could indicate engine wear or damage. System 1 oil filters are perfect for daily drivers, fleet vehicles, and race and marine applications.

4.75 out of 5 stars ( 16 )

$190.00

Wilwood SRP Drilled Performance Brake Rotors

For custom, show, and high performance sport driving, SRP rotors offer the high-tech look and improved performance of a directional cross-drill and face slot pattern. The venting and cleaning action of the holes and slots reduce pad glaze, disperse gasses, and decrease heat generated at the pad-to-rotor interface. The holes and slots also inhibit irregular pad compound buildup on the rotor faces, resulting in smoother engagement and improved pedal response in all conditions. The material removed also contributes to lower rotating and unsprung weight. Each rotor is precision-machined to less than .001 in. tolerances for overall flatness, parallelism, and radial run-out on long-grain carbon-iron castings. The rotors are finished with a black electro coat or silver zinc wash finish to provide corrosion resistance. SRP rotors are available in all popular sizes used in Wilwood's Pro Series and Big Brake conversion kits.

4.81 out of 5 stars ( 27 )

$131.01

PowerStop Z23 Evolution Sport Brake Upgrade Kits

PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. PowerStop's Z23 Evolution Sport brake upgrade kits come with everything you need--pads, rotors, and premium stainless steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the carbon fiber ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with drilled and slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily driver the easy and affordable performance upgrade it deserves with PowerStop Z23 Evolution Sport brake upgrade kits.

4.72 out of 5 stars ( 3064 )

$122.29

$153.60

Wilwood CPB P-Brake Replacement Cables

When you need a new parking brake cable for your CPB rear brake kit, Wilwood has it. Made to fit just like the originals, they include brackets for a hassle-free install. Wilwood makes the systems and replacement parking cables necessary to maintain your brake performance.

4.0 out of 5 stars ( 2 )

$220.75

Moroso Street/Strip Oil Pans

Designed for street performance machines that see occasional strip use, these Moroso oil pans are modified with deep or kicked-out sumps for increased capacity and oil control under hard acceleration. With a simple bolt-on installation into most production chassis, these Moroso street/strip oil pans are perfect for the weekend warrior.

4.15 out of 5 stars ( 418 )

$239.99

On Sale

B&M Precision Sport Shifters

These B&M Precision Sport shifters incorporate the latest technology from B&M in shifter development. They are CAD-designed using 3D printer prototypes to allow for different designs and materials, depending on your vehicle application. The shifters feature a fully isolated stick with a spherical pivot bearing that provides for extremely smooth operation and a 30 percent throw reduction. These shifters provide that quick, smooth, precise shifting you need, time and time again.

4.6 out of 5 stars ( 96 )

$142.95

Thule Passage Bike Racks

Thule Passage bike racks' anti-sway prevents bike-to-bike contact and features soft rubber cradles to protect your bike frame, while also holding the bike(s) secure. These rear receiver racks feature narrow cradle arms designed to hold a wider range of bike frames, including smaller child frames, and easily fold down when not in use. Their patented FitDial provides the perfect fit for your vehicle, along with SoftCushion pads that protect your trunk and hatch. Their vinyl coated buckles provide a firm hold to your vehicle and protect it from scratches, and their 6-strap system secures the racks to your vehicle.

Not Yet Reviewed

$179.95

Body Parts Hoods

If you're in search of quality OE replacement hoods for your restoration project, check out Body Parts reproduction hoods. Made from quality materials, each application is based on the manufacturer's factory designs to provide accurate fit, form, and function.

3.59 out of 5 stars ( 81 )

$198.99

PIAA Platinum Series LED Light Bulbs

PIAA Platinum Series LED light bulbs are engineered with a brilliant cut-line and anti-glare technology to direct the light to where you need it most. High-power Lumiled Luxeon Z ES LEDs provide extreme luminescence in a micro-footprint package for precise beam angle control. In addition to the dual alloy heat sink, these LEDs have excellent thermal resistance that allows for consistent operating temperatures and longer life. PIAA Platinum Series bulbs are available in multiple configurations for many applications. Features include: * High-luminescence 25 watt Z ES LEDs for maximum brightness * Adjustable beam design for precise optics * Reversible fanless aluminum heat sink design for extra clearance * 6000K color temperature to replicate daylight * LED diode placement maximizes the stock reflector and housing Note: Not for use in low voltage high/low beam DRL applications. Please check for clearance behind the stock housing before purchasing.

5.0 out of 5 stars ( 1 )

$177.99

Clearance

Metro Moulded SUPERsoft Individual Weatherstripping Seals

Used by restoration experts across the world, Metro Moulded SUPERsoft individual weatherstripping seals will outperform and outlast any of their competitors. They use only galvanized, corrosion-resistant metal cores, tough, hardened nylon, and rubber formulations that contain no filler materials. Metro seals are designed to match specific applications and are available for a wide variety of applications. Features and benefits of Metro Moulded SUPERsoft seals: * Very smooth skin that is free of exposed cells or flaws * Composed of uniformly sized microcells for even compression and sealing; you won't have to slam your doors * Jet black, not ash gray, in color for a refined, concours look * Molded using computerized temperature control for consistent cure cycles; prevents scorching and under cured parts * Made with over 50 tons of pressure for perfect definition and exact detailing * Hot-bonded at all joints * Dies are made using CAD and CNC mills for proper 3-D contouring, a perfect fit, and OEM-quality appearance * The softest OE-replacement weatherstrip products on the market

4.46 out of 5 stars ( 466 )

$117.99