Availability
Lokar's Hi-Tech flexible braided stainless transmission dipsticks match right up with other Lokar accessories. They feature a flexible, heat-resistant PTFE rod with a braided stainless steel cover. The inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting inside of the headers. These dipsticks are available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length and other options preferred for your vehicle make and transmission application.
( 338 )
$138.95
—
$176.95
Silver Sport hydraulic clutch master and slave kits are designed for use with the aftermarket Tremec Magnum 6-speed and Tremec T5, TKO, and TKX 5-speed transmissions. Each kit provides up to a 20 percent lighter clutch pedal effort compared to mechanical linkage, creates more room for headers, and cleans up your engine bay. The SST kits feature custom master cylinder mounts to take out the guesswork for the correct pushrod angle and an OEM-style, proprietary designed release bearing. It's rated at 7,000 rpms, has a forged aluminum housing, silicone dust boot, piston wiper seals, and a 1,000,000 cycle service life. Silver Sport complete hydraulic kits include: * Master cylinder * Master cylinder mount * Pedal pushrod/mounting components * Reservoir * Hoses * Concentric slave cylinder (slave cylinder/release bearing assembly) * Hardware * Detailed instructions
( 6 )
$659.95
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 51 )
$98.99
Lokar's Midnight Series flexible braided stainless transmission dipsticks feature a heat-resistant PTFE rod with a black braided stainless steel cover. The flexible inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting them inside of the headers. They're available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length recommended for your transmission application.
( 80 )
$151.95
—
$161.95
Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque
( 9 )
$1,487.50
—
$1,576.75
Ford Performance Parts Tremec Cobra R bellhousings are designed to mount the Tremec 3550 manual transmission to Ford 4.6L/5.4L modular gas engines. They are manufactured from cast aluminum and feature all factory mounting positions. The Tremec Cobra R bellhousings may require minor modifications for transmission clearance and mounting in some vehicle applications.
( 5 )
$669.99
If you're doing an engine or transmission swap, building a kit car or street rod, or you just need a replacement bellhousing, look no further than Ford Performance Parts bellhousings. They are cast aluminum production-style bellhousings built to Ford's specifications, ensuring you of a high-quality product that's right for the job. Some applications may require minor modifications for transmission clearance and mounting.
( 27 )
$299.99
Lokar Anchor-Tight locking transmission dipsticks match right up with other Lokar accessories. These replacements feature a locking mechanism that eliminates the expulsion of the dipstick handle under transmission pressure. They're constructed from 6061 aluminum with a flexible inner dipstick measuring cable. Order the model recommended for your vehicle and transmission application.
( 80 )
$134.95
—
$199.95
McLeod aluminum bellhousings are not lightweights when it comes to accuracy and compact performance. They're constructed of aluminum—with a narrow body design for lightness, and a steel inner liner for added strength and protection. The innovative mounting plate is interchangeable to accommodate different transmissions. McLeod aluminum bellhousings will fit a wide range of vehicle, engine, and transmission applications, dating as far back as the 1950s.
( 1 )
$1,525.00
RAM Concept 9.5 dual disc clutch/billet flywheel kits are the perfect entry level dual disc clutch systems. Each kit features an increased clamp load pressure plate, 9.5 in. premium-faced organic or metallic clutch discs, and a RAM surface-ground and balanced billet steel flywheel. The pressure plate provides a silky-smooth clutch pedal feel, while the dual disc provides additional holding capacity when compared to single disc systems. RAM Concept 9.5 units also utilize a sprung hub top disc that helps dampen and quiet the initial clutch engagement, plus a strap driven floater plate eliminates any floater plate rattle concerns. They make excellent choices for LS/LT and Coyote engine swaps, as well as Tremec transmission swaps. So, for an outstanding driving experience, choose a RAM Concept 9.5 clutch kit with flywheel designed for your vehicle's needs. Features and benefits: * A higher clamp-load 2,000 lb. static pressure plate with easy pedal effort * Precision machined billet stand segments to provide a stable mounting platform--no flimsy stamped steel mounting provisions * Precision mounting hardware properly centers the segments to the flywheel for proper balance and vibration-free driving comfort * Strap driven floater plate system assures a quiet, no rattle operation at any rpm * Sprung hub top disc, solid hub bottom disc arrangement helps dampen initial engagement and ease stress on the driveline * Nesting clutch disc hub design provides more spline engagement area on the input shaft and helps spread out the load more evenly to avoid input spline damage * Each unit is preassembled by hand in-house, ensuring the appropriate floater plate gap is achieved for trouble-free installation and performance * Available with either: -- 300 Series organic friction material for applications up to about 650 hp -- 900 Series metallic friction material for use up to about 800 hp
Not Yet Reviewed
$1,150.00
—
$1,480.00
Lokar Midnight Series Anchor-Tight transmission dipstick bottom fitting assemblies are constructed from 6061 aluminum with a black finish. These innovatively engineered fittings allow you to use your Lokar Anchor-Tight Dipstick on multiple transmissions by simply plugging your dipstick housing into one of these "spare" fittings after a trans swap. The result is a more secure, leak-free connection. These fittings are offered for direct mount, trans mount, or firewall mount applications to best suit your application.
( 2 )
$134.95
—
$147.95
TCI GM to Ford adapter plates are constructed from 1/2-inch 6061-T6 aluminum and measure 18-inches tall x 24-inches wide. They may be trimmed for chassis clearance or used as a mid-mount plate. These kits are designed to retain the stock starter location.
Not Yet Reviewed
$48.95
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 303 )
$598.95
—
$629.95
Centerforce I clutch kits are designed to be high-quality, entry-level performance clutches for those in need of a superior stock replacement. Using the patented Centerforce centrifugal weights (where applicable) and premium friction materials, these Stage 1 clutch systems are perfect for applications with stock engines or mild power increases from minor bolt-on modifications.
( 31 )
$493.95
McLeod Super StreetPro clutch kits are great Street/Strip performance clutches—perfect for use with moderate engine modifications, including intake and exhaust upgrades, camshaft and cylinder head work, and engine management programming. Super StreetPro kits provide a heavier pedal effort than stock, along with improved holding capacity, making these excellent high performance replacement clutches. Additional features and benefits include: * SFI-approved assembly * Handle up to 500 hp * Dual-faced organic and ceramic disc for smooth engagement with exceptional holding capacity
( 229 )
$899.00
Drivers need a clutch that offers smooth engagement, quiet operation, light pedal effort, and high-end holding capacity. Centerforce DYAD drive system multi-disc kits offer that, and more. These kits are designed and developed to meet the needs of modern high-end vehicles. This technology allows engine torque levels to exceed 750 lb.-ft. and still be driven every day. Take your vehicle to the next level in high performance with DYAD DS multi-disc clutch kits and feel the difference!
( 1 )
$1,499.99
—
$1,816.95
Motorcraft wheel bearing seals are recommended by Ford Motor Co. for Ford and Lincoln vehicles. They're designed to meet Ford's rigorous OE engineering standards for fit, functionality, and durability. This ensures long life under harsh conditions, including temperature and pressure extremes. Additional product features: * Provides effective sealing against water, oil, gases, chemicals, and harmful contaminants * Must pass demanding tests to ensure dirt, dust, and moisture do not intrude past the seal * Sealing ability is tested while exposed to a wide range of pressures, automotive chemicals, and temperature extremes * Tested to ensure the rubber returns to specified thickness after compression * Specifically designed for each application for optimum performance and easy installation * Covered by Ford's industry-leading limited warranty
Not Yet Reviewed
$19.99
Introducing the new Centerforce SST (Solid Street Twin) clutch and flywheel kits—engineered and developed for vehicles producing 400 to 925 lbs.-ft. of torque. The SST discs utilize solid hubs to reduce the rotational weight on the input shaft for quick clean shifts. The discs in the assembly are built using high-quality friction materials, for smooth engagement and longevity. These SST clutch and flywheel kits feature a lightened billet steel flywheel, providing low inertia resulting in quicker rpm and the Centerforce anti-rattle system to reduce floater rattle/noise. In addition, no complicated setup or adjustments are required, just bolt in the clutch and flywheel kit application you need—and "get a grip"! For streetcar enthusiasts looking for a high-quality Twin disc clutch system, the Centerforce SST clutch and flywheel kits are an economical choice. Key features and benefits: * Positive drive floater * Easy pedal * Precision balanced * Smooth engagement * Spec card included * ARP hardware * Solid hub for light weight and quick shifts * Simple install
( 5 )
$1,259.95
Grab one of these race-ready Summit billet aluminum flywheels for the durability and performance that you demand at a great price! Ideal for light drag racing and road racing, these flywheels are constructed from high-strength, forged billet aluminum for superior strength. The ring gear is mounted with welded tabs riveted to the flywheel. These precision-balanced flywheels are SFI-1.1 approved and most are drilled for both Borg & Beck and Long-style clutch assemblies.
Not Yet Reviewed
$416.99
RAM Concept 10.5 dual-disc organic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 750. RAM Concept 10.5 dual-disc organic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit
( 5 )
$939.00
McLeod hydraulic throwout bearing conversions are designed to convert your vehicle over to hydraulic power. They produce a softer pedal effort, giving you more manageable and smoother clutch operation. Also included are stainless steel braided hoses, steel fittings, an aluminum slave cylinder and a remote reservoir. The McLeod hydraulic throwout bearing conversions use your stock pedal and are easy to install and adjust.
( 14 )
$495.00
RAM Concept 10.5 dual-disc metallic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 1,050. RAM Concept 10.5 dual-disc metallic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit
( 1 )
$1,279.00
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 104 )
$1,299.95
—
$1,699.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
