Availability
Showing In Stock Items. Show All 103 Items.
Summit Racing™ flywheel bolt kits are heat-treated to Grade 8 specifications, and have a reduced-profile hex head for clearance. Their black oxide finish resists rust and corrosion, and the kits include lock washers.
( 20 )
$9.99
Timken Bearing manual transmission bearings will make sure that your transmission is working correctly. They are available for different models and gear positions inside of the manual transmission case. These high-quality manual transmission bearings are built within specific tolerances for fit and function. When your manual transmission bearings need to be replaced, look to Timken Bearing for help.
( 8 )
$9.99
Crown Automotive clutch fork pivot balls allow for the adjustment of the release fork height when the clutch assemblies are changed. An improperly aligned clutch fork can increase the amount of pedal throw required to release the clutch. The surface where the pivot ball and clutch fork meet should be round, without any flat spots. These replacement parts from Crown are a direct fit for your Jeep.
( 5 )
$8.99
Dorman transmission case vents offer OE operation and fit. You'll keep your vehicle on the road longer for less when you restore proper transmission ventilation. When excess case pressure is prevented, the transmission is protected against fluid leaks.
( 13 )
$2.99
These RAM Automotive pilot bushings eliminate the wear and tear that stock bushings put on your transmission input shaft. They offer longer life and better alignment, especially with high-output engines and sticky tires.
( 70 )
$7.00
Whether you're dropping in a freshly rebuilt V8, or just replacing worn-out motor mounts, make premium-quality Summit Racing™ motor mount bolts your go-to choice. These hardware sets are available for a range of applications—from small and big block Chevys, to small block Ford Windsors. Each package contains rugged steel hex-head bolts with a protective finish for corrosion resistance, along with a set of flat washers. Install your engine with confidence; it all starts by securing the motor mounts to your engine block with extra-strong specialty bolts from Summit Racing™.
( 11 )
$7.99
ATP flexplate bolts are made of high-quality steel and meet or exceed all OE specifications. Most vehicles with automatic transmissions have flex plates that connect the engine and torque converter. Constant expansion and contraction of a flex plate over time can result in cracks or shearing of the flex plate—causing serious and expensive damage. Whenever a flex plate is replaced, it makes good sense to replace the bolts securing it. Order the replacement bolts recommended for your year/make and engine application.
( 3 )
$9.99
These TransGo automatic transmission accumulator pistons are designed to replace the original plastic accumulators that break or crack after prolonged use. They are manufactured from aluminum and machined to precise specifications for a simple bolt-in installation.
( 22 )
$9.00
—
$9.91
These National Bearing automatic transmission selector shaft seals are designed to keep your transmission sealed up properly. They are manufactured from durable steel and have a rubber insert for a leak-free seal. The selector shaft seals are available to fit most automatic transmission models.
( 3 )
$6.99
ACDelco transmission fluid dipstick seals fit perfectly around the base to help prevent leaks. Designed to provide OE performance, the seals are offered in several styles for factory fitment on thousands of vehicles. Guard against unwanted leaks; replace dirty, aging, or damaged originals with a new transmission fluid dipstick seal from ACDelco.
( 5 )
$3.99
Crown Automotive clutch fork return springs will provide OE fitment and function. The proper movement and pressure of your clutch components depend on the many springs involved. No matter which throwout fork or lever springs you need for your classic rig or newer ride, Crown can help keep your clutch in optimum operation for smoother shifts. Choose your replacements from the selection of Crown clutch return springs for improved performance.
( 17 )
$2.99
ATP's transmission dipstick tube seals serve two purposes: preventing engine oil from leaking—and ensuring no harmful contaminants enter the lubricant. Manufactured from high-quality materials, the seals are available in a variety of sizes and configurations for fitment on thousands of applications. These OE-style replacements meet or exceed factory specs to ensure easy installation and optimum performance.
( 6 )
$1.99
—
$5.99
Pioneer flywheel bolts are direct OE replacements offering the right fit and function. Save time running to the dealer; purchase these inexpensive, but necessary fasteners from Pioneer.
Not Yet Reviewed
$10.99
McLeod dowel pins are available in a variety of sizes and applications.
( 9 )
$9.50
ACDelco GM Genuine Parts transmission vent hose and tubes relieve internal air pressure fluctuations caused by the heating and cooling of the transmission and help to keep out dirt. They are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These true OE parts will provide the same fit and performance as the originals they are replacing.
( 5 )
$3.99
—
$6.99
When servicing your flywheel or clutch, Dorman flywheel fasteners are recommended for replacement. Make sure you have the bolt with the correct thread pitch, head size, and length to get the job done right. Their high-quality steel construction is coated with black oxide for corrosion resistance and long-lasting durability. Make sure you have the right components for the job with dependable Dorman parts.
( 14 )
$6.99
—
$8.99
Wear at the piston pin bore surface can result in poor shift quality and burnt clutches and bands. Sonnax pinless accumulator piston kits prevent pin bore leakage. They're also longer to stabilize the piston and prevent piston cocking. They feature dual seals to stabilize and completely seal the bore, and steel balls to plug the existing pin bore. Fluid loss through the piston pin bore will no longer be an issue when you invest in Sonnax piston kits.
( 17 )
$8.94
Dura-Bond automatic transmission bushings are available in a wide range of offerings covering the aftermarket and today's needs for improved quality and tolerances. Individual bushings and kits are available, as well as semi-finished options that allow you to machine bore for proper fit and centerline accuracy. Dura-Bond transmission bushings feature seamless construction that makes installation easy, eliminating breakage and bushing surface interruptions. * Full round Babbitt bushings: Tight tolerances, no walking, no possible split when installing, wall tolerance of .0005 and O.D. tolerance of .001 * Bronze bushings: Hard and strong, long lifespans; resist shock, impact, wear, and corrosion * Coated bushings: Retains transmission engine oil on the surface, even under extreme heat and pressure, providing secondary lubrication in the event of momentary oil starvation * Dry film lubricant coating: Provides solid lubrication of parts subject to torque or contact stresses for maximum fatigue life, improved surface properties, excellent load carrying capacity, and intermittent dry lubrication * Bushings with indents: Provide lubricant reservoirs for better oil retention that allows for excellent and prolonged service * Bushing kits are constructed with all the necessary bushings to complete a rebuild and are manufactured to precise OEM dimensions for an exact fit
( 10 )
$3.99
—
$9.99
ACDelco offers automatic transmission shift shaft seals for thousands of vehicles from the 1980s and up. These economical steel/rubber replacements are available in different styles for compatibility with over 80 transmission models. Ensure a quality fit and factory-style performance; order the seal recommended for your application.
Not Yet Reviewed
$7.99
Keep your vehicle's transmission in peak performance with Dorman clutch pilot bushings and bearings. These factory-style replacements keep your tranny input shaft safely supported and in place when not engaged. Ignoring a worn-out pilot bearing can rob you of efficiency or even cause expensive damage. Order the type and size needed for your specific application.
( 28 )
$6.99
—
$8.99
ACDelco GM Genuine Parts flywheel bolts are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Providing secure fastening of components, these bolts are the true OE parts installed during the production or validated by General Motors for GM vehicles. Get the correct fit and function, along with a hassle-free install utilizing ACDelco GM Genuine Parts flywheel bolts.
Not Yet Reviewed
$4.99
ACDelco GM Genuine Parts automatic transmission bearings and races are meticulously manufactured to be an exact replacement for your vehicle. Genuine OE parts are recommended in order to deliver peace of mind that the fit, form, and function is of the highest standards. Get the factory-style components you need from the same source as General Motors with ACDelco. Order the bearings designed for your application.
( 2 )
$5.99
Complete your custom engine build with Spectre Performance flywheel fasteners. They are engineered to provide premium-quality hardware, are black oxide plated for corrosion resistance, and come with security lockwashers. Spectre offers various bolts and gaskets to help you finish your project.
( 1 )
$10.99
Trail-Gear offers magnetic drain plug kits in your choice of aluminum or steel washers. Both are a great way of keeping metal from building up in the oil. Their low-profile design uses a recessed 10mm Allen socket. The aluminum washers are designed for transfer cases and G, W, and R Series aluminum transmissions. The steel washers are designed for axle housings and L Series steel transmissions.
( 4 )
$9.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
