Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
1994 PONTIAC FIREBIRD Parts and Accessories
Showing In Stock Items. Show All 122 Items.
Summit Racing™ Aluminum Driveshafts
Get your hot rod, track car, or daily driver moving with Summit Racing™ aluminum driveshafts. Recommended for applications putting out up to 700 lb/ft of torque, they are constructed from aluminum to reduce overall weight, which translates into more power getting to the wheels where it can do its job! We use the best seamless tubing to ensure the ultimate in strength and rigidly. Whether you are looking for another tenth or two off of your ET, or just better throttle response in your hot rod, Summit Racing™ will take care of you with aluminum driveshafts.
( 202 )
$469.99
Detroit Speed Detroit Tuned Steering Rack and Pinions
Detroit Speed Detroit tuned steering rack and pinions have been optimized to provide an exceptional modern performance feel on the street and on the track. They're available in both standard and narrow widths that are 24.5 in. and 21.5 in., respectively. They feature valving that's specifically designed to provide the increased performance feel found in late model performance vehicles, and they're made from all-new, superior-quality components for long-lasting durability. Detroit Speed Detroit tuned steering rack and pinions come complete with polyurethane mounting bushings and have an internal inner tie rod boot balance tube. So, if you want nothing but the best when it comes to your hot rod or street musclecar, Detroit Speed Detroit tuned steering rack and pinions are your answer.
Not Yet Reviewed
$524.95
UMI Performance Transmission Mounted Torque Arms
UMI Performance transmission mounted torque arms eliminate unwanted traction problems and transfer your power to the wheels. UMI Performance transmission mounted torque arms bolt on directly in place of the factory unit using existing mounting holes and require no drilling or welding. These torque arms are designed to eliminate wheel hop under hard acceleration and reduce 60 ft. times instantly. UMI Performance transmission mounted torque arms are supplied with a low-deflection front bushing designed to replace the stock rubber bushing and bolt in the existing clamshell. The rear torque arm mount is constructed entirely of 0.375 in. thick, CNC-machined mild steel and is fully MIG-welded. These torque arms feature on-car adjustability for easy pinion angle adjustments using a 4140 heat-treated adjuster and 3/4 in. rod ends. Additional features include: * Constructed from 1.250 in. x 0.120 in. DOM seamless steel tubing * TIG-welded 4140 chromoly tube adapters * On-car adjuster built using 4140 chromoly steel and heat-treated for maximum strength * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Rear mounting plates use 0.375 in. thick mild steel and are designed to fit stock as well as 12-bolt and 9 in. rear-end housings * Rear mounts feature solid 3/4 in. rod ends and are attached using Grade 8 hardware * Durable powdercoated finish
( 19 )
$336.41
—
$759.99
UMI Performance Front and Rear Sway Bar Kits
UMI Performance sway bars are designed to reduce body roll and understeer and increase cornering capabilities, resulting in a more balanced suspension. The front sway bar is more rigid than the factory model and comes complete with new polyurethane end links and greaseable sway bar bushings. The rear sway bar is supplied with new Grade 8 mounting hardware and locknuts. UMI Performance sway bars are manufactured from 4140 chromoly steel—and formed as one piece to ensure maximum strength and performance. Each rear sway bar is heat-treated and heat-formed to maintain longer memory than a cold bent bar, while the front sway bar is CNC-bent for a precise and accurate fit every time. Order the kit recommended for your vehicle.
( 73 )
$579.99
MagnaFlow Street Series Performance Exhaust Systems
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 613 )
$718.00
UMI Performance 1993-2002 GM F-Body 3-Pt. Subframe Connectors and Torque Arm Kits
UMI Performance 1993-2002 GM F-Body 3-pt. subframe connectors and torque arm kits provide an easy bolt-on drag race solution for GM F-bodies. These suspension connectors reinforce the chassis and prevent quarter-panel wrinkling from hard launches; a tunnel-mounted torque arm is the proven solution to reduce 60 ft. times. Shortened torque arm improves instant center location; as a result, forward traction is improved. These kits include removable and replaceable NHRA-approved driveshaft loop. Using both parts together dramatically reduces chassis flex. Product features: * 3-pt. subframe connectors reinforce chassis and prevent quarter-panel buckling * Shorter than stock, tunnel-mounted torque arm improves forward traction * Complete kit braces entire underside of car to reduce chassis flex * NHRA approved driveshaft loop (removable and replaceable) * Includes hardware
Not Yet Reviewed
$1,099.99
On Sale
Hooker Super Competition Cat-Back Exhaust Systems
Hooker Super Competition cat-back exhaust systems aid in performance gains from modifications such as cams, intakes, throttle bodies, headers, etc. They use large-diameter, mandrel-bent, 16-gauge aluminized tubing for maximum efficiency, the lowest backpressure, and longer life. These systems are designed using flanged construction (where applicable), and use existing stock hangers for easy installation.
( 41 )
$638.95
$574.95
UMI Performance Bolt-On Tubular Subframe Connectors
UMI Performance tubular subframe connectors are designed to tie the front and rear subframes together using bolt-in hardware supplied and they require no welding! Subframe connectors improve your car's handling ability, while reducing T-top squeaks, dash rattles, and quarter panel flexing. They are designed for autocross, road racing, and drag racing setups. Connecting the front and rear subframes together allows for better weight transfer, improved traction, and straighter launches. Their setup tucks tightly against the floor using strong tubing, causes no ground clearance loss, and cannot be seen from the side of the vehicle. Additional features include: * Constructed from chromoly or mild steel tubing * Front mounting points feature 0.250 in. thick mild mounting plates * Mounting plates feature precision CNC-machining to ensure tolerances * Tubular design allows for a tighter fit against the vehicle's undercarriage * Uses rear control arm mount for increased strength and ensures proper installation * MIG-welded construction * Durable powdercoated finish
( 40 )
$349.99
BMR Xtreme Anti-Roll Bars
BMR Xtreme anti-roll bars feature a massive diameter and include heavy-duty rod ends. These sway bars have an easy bolt-on design with the option to be welded, if desired. The factory rear sway bar works well for handling, but falls short when it comes to drag racing. There are two main reasons for this—the OE bar diameters are nowhere near the right diameter to control torque loading on a launch, and the OE-type bar only attaches at the control arms with no frame attachment points. This allows for too much body separation and no way to control it. By attaching the end links to the frame, body separation is minimized and converted into forward momentum. This, combined with the large diameter bar's ability to better control torque loading, creates more consistent and predictable launches and better 60 ft. times. BMR Xtreme anti-roll bars come with all necessary Grade 8 mounting hardware.
( 26 )
$449.95
BMR Xtreme Torque Arms
Are you looking for a torque arm that will stand up to your 10.50 or lower ET? Look no further. BMR Suspension Xtreme torque arms are constructed from TIG-welded 4130 chromoly tubing to take the punishment of that 8, 9, or 10-second motor, BMR torque arms provide less wheel hop for stronger performance. Additional features: * Gusseted rear mounting bracket made from 3/8 in. laser-cut plate * Solid 4130 rod eyes * Reinforced front bushing mount * Additional cross bracing
( 34 )
$329.95
—
$749.95
Kooks Headers Race Long Tube Headers
Kooks Headers race long tube headers will deliver high performance to your racer. Their full-length race headers are built from T-304 stainless steel and are available in several primary tube and collector diameters to match your application needs. Optimize scavenging and increase power with top-quality Kooks race long tube headers.
( 66 )
$1,249.13
—
$1,418.95
UMI Performance Front Sway Bars
UMI Performance front sway bars are designed to reduce body roll and under-steer and increase corning capabilities, resulting in a more balanced suspension. These front sway bars are more rigid than the factory originals and will bolt directly in place with no modifications. Each kit includes new Energy Suspension end links and greaseable sway bar bushings with new zinc plated clamshells. Nearly two dozen models are available for vehicles from 1963 and up; order the sway bar recommended for your application.
( 101 )
$329.99
UMI Performance Tubular K-Members
UMI Performance tubular K-members instantly remove 25 lbs. from the front of your vehicle, while maintaining strength for streetability and daily use. UMI Performance tubular K-members have been designed to handle everything from drag racing to daily driving and even autocross. Their dual tube center section adds increased strength over the competitors' designs, making them far superior and able to handle everyday stress and abuse. Additional front-end adjustment can also be achieved with these K-members. The lower A-arm slots feature a 1/2 in. adjustment built in and will work with the stock and any aftermarket A-arm setup. The front and rear A-arm slots also feature additional bracing to withstand hard side loads and extreme pressure. These tubular K-members also feature integrated motor mounts, eliminating the stock cast iron mounts for maximum weight savings. Additional features include: * Main center tube constructed from 1.500 in. x 0.120 in. seamless steel tubing * Additional cross braces use 1.250 in. x 0.120 in. seamless steel tubing * TIG and MIG-welded construction for superior strength * Front and rear A-arm mounts CNC-machined and fabricated from 0.188 in. thick steel * Rear A-arm mounts gusseted to withstand extreme side loads and pressure * Dual tube center section adds increased strength over any competitor's design * All mounting plates are CNC-machined to ensure hole-to-hole accuracy * Factory locator pins included for easy installation and exact fit * Completely fixture-welded to ensure factory fitment with no grinding or cutting
( 17 )
$729.99
Aldan American Track Comp Coilover Kits
Aldan American Track Comp double adjustable coilover kits are hand-built in the USA to replace your factory shocks and springs with drastically improved handling and ride quality. These kits are designed for specific vehicle applications and offer shock bodies crafted from lightweight, high-strength, CNC-machined 6061 T-6 billet aluminum. They're matched with high-tensile chrome silicon steel coil springs for strong, consistent performance. A black powdercoat provides added durability and a pleasing appearance. The coilover shocks ship fully assembled and are factory serviceable by Aldan American. You can order a pair for either the front or rear suspension, or a complete set for the entire vehicle.
( 4 )
$1,978.95
Strange Chromoly Fully Assembled Driveshafts
Strange chromoly fully assembled driveshafts are designed to handle the high horsepower of today's engines. And, they're offered at mild steel prices! Their seamless chromoly shafts are heat-treated and feature 1350 or 1480 Spicer precision, self-lubricating U-joints. Strange fully assembled driveshafts include weld ends that are properly phased and installed. Plus, every shaft is electronically balanced and has a total indicated runout of less than .008 in.! DOM shafts are carefully MIG-welded with Spicer HD weld ends and U-joints. The seamless chromoly shafts are meticulously TIG-welded and fitted with Strange forged chromoly weld ends and Spicer U-joints. Buy a driveshaft made for the harshest conditions--Strange chromoly fully assembled driveshafts.
( 59 )
$409.99
UMI Performance Road Race Tubular K-Members
UMI Performance Road Race K-Members are designed for serious racers who expose their vehicles to more stress than any street cars will ever experience. Using an additional 1.000 in. of tubing, UMI Performance Road Race K-Members tie together crucial areas. They weigh in at 3 lbs., more than UMI's standard version, but still maintain a much-needed weight savings.
( 3 )
$929.99
Procar Series 1614 Seats
Procar Series 1614 seats are perfect to reinforce a traditional, classic look for your interior. They feature stylish vertical stitching, sleek lines, and side bolsters for maximum support and comfort. The adjustable bucket seats incline and recline via lever control. Each seat is built with TIG-welded steel tubing, injection-molded foam, and suspension straps for support and comfort; and sliders are included. Procar Series 1614 seats are available for the driver or passenger side, in a choice of material and colors.
( 3 )
$297.99
UMI Performance Bolt-On 3-Point Subframe Connectors
UMI Performance bolt-on 3-point subframe connectors increase chassis stiffness, performance capabilities, and overall drivability. Their setup is designed to tie the front and rear subframes together, adding additional cross-bracing throughout the center of the vehicle and protecting it to its fullest, while keeping ground clearance issues to a minimum. This spider web effect greatly improves your car's handling ability, while reducing T-top squeaks, dash rattles, and quarter panel flexing. They are designed for autocross, road racing, and drag racing setups. Connecting the front and rear subframes together allows for better weight transfer, improved traction, and straighter launches. Additional features include: * Constructed from 1.750 in. x 0.120 in. DOM mild steel tubing * 3-point brace uses 1.250 in. x 0.095 in. DOM mild steel tubing * Front mounting points feature 0.250 in. thick mild steel mounting plates * Mounting plates feature precision CNC-machining to ensure tolerances * MIG-welded construction * Durable powdercoated finish
( 10 )
$499.99
—
$659.99
Instant Rebate
QA1 Torque Arms
These strong, tubular steel torque arms from QA1 feature reinforced mounting points for maximum strength and rigidity. Their polyurethane bushings will reduce wheel hop caused by excessive flex under hard acceleration and cornering. The torque arms are available in your choice of solid or adjustable designs.
( 1 )
$413.96
UMI Performance Rear Control Arms and Panhard Bar Kits
UMI Performance Rear control arms and panhard bars are direct bolt-on replacements designed to minimize wheel hop and improve cornering and track consistency, while lowering ETs. The control arms are constructed from a DOM mild steel tubing 1.375 in. o.d. x 0.095 in. wall and are completely CNC-machined and fully TIG-welded for outstanding strength. The adjustable models feature spherical rod ends that allow for "bind-free" operation, making them great upgrades for both your track and autocross-driven vehicles. The Roto-Joint equipped models are designed to work like a spherical rod end while maintaining the qualities of a softer bushing. Roto-Joints feature a 4140 chromoly ball that rotates in a Delrin race. Additional features include: * Control arms are 1.375 in. x 0.095 in. mild steel tubing * 4130 chromoly threaded tube adapter (adjustable models only) * 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod end * TIG-welded construction * CNC-machined 6061 aluminum step bushings with zinc plated steel sleeves (where applicable) * Polyurethane greasable bushings * On car grease fittings (except rod ends) * Use OEM hardware
( 84 )
$239.99
—
$459.99
On Sale
RAM Single Disc Push-Type Conversion Camaro Firebird Clutch Kits
If you have 1993-1997 Camaro or Firebird and are tired of using the factory pull-style clutch system, RAM Clutches has the solution for you with their single disc push-type conversion Camaro/Firebird clutch kits. Each kit comes with the necessary components to convert your car from "pull-style" to the more conventional "push-style" actuation. The kits come in a choice of either a steel or aluminum flywheel in either a one-piece or two-piece seal configurations, depending on your application. Clutch kit sold separately.
( 1 )
$1,099.00
—
$1,427.00
$989.10
—
$1,284.30
Fairchild Industries Weatherstrip Seals
Fairchild Industries, a trusted automotive OEM supplier, manufactures weatherstrip seals utilizing quality commercial-grade materials and high-tech reverse engineering—for superior form, fit, and function on many vehicle applications. These weatherstrip seals will produce a smooth, sleek, jet-black, non-fade finish that adds value to your ride—while sealing and protecting particular sections of your vehicle from the outdoor elements, and reducing drafts and road noise. Order the Fairchild replacement weatherstrip seals designed your for vehicle and specific locations.
( 372 )
$117.99
BMR Suspension Rear Suspension Kits
When performance is your requirement, BMR rear suspension kits are your best options. The stronger suspension components, along with the 95-durometer internally fluted greasable bushings, will greatly reduce control arm flex and bushing deflection. What you receive is the improved performance you desired, plus suitable ride quality with acceptable noise and vibration levels. The kits are available in your choice of on-car adjustable and non-adjustable kits, as well as your choice of durable black or red powdercoated finishes.
( 18 )
$189.95
—
$429.95
Instant Rebate
QA1 Sway Bars
QA1 sway bars afford improved handling and control by reducing body roll. They're manufactured from lightweight 4130 chromoly steel and 1045 cold-formed steel—with a gloss black powdercoat finish for maximum strength, endurance, and corrosion resistance. The QA1 sway bars are precision CNC-formed, ensuring proper mounting in the stock location for a true bolt-on installation. They also feature adjustable end links to customize roll stiffness to your personal specifications. These sway bars from QA1 include greaseable graphite polyurethane bushings, along with high-quality zinc plated hardware. Engineered and road-tested to give your ride the grip that it needs to hold the road, QA1 sway bars are available for fitment on many vehicle applications. Order them individually for the front or rear—or in a complete kit.
( 140 )
$326.66
