Filters
Borgeson's Street and Performance Series steering boxes are modern quick ratio units specially designed to replace the Saginaw/Delphi 800 Series in 1965 and up GM vehicles and 1968-86 Chevy C10 and K10 trucks. These Street and Performance power steering boxes will bolt directly to the stock location and fit to the original power steering pitman arms. Adapters are included with each steering box to be able to use either O-ring or flare style hose connections. All Borgeson power steering boxes are assembled and quality tested in-house to ensure you get the best possible replacement for your vehicle. Note: Vehicles switching from manual steering will require a power steering pitman arm (not included).
( 205 )
$467.78
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 396 )
$369.95
—
$394.95
The timeless styling of Cragar S/S Super Sport wheels is a great look for any American musclecar--old or new! Cragar 61C Series S/S wheels offer a classic 5-spoke pattern in a beautiful mirror chrome finish, making them eye-catching classics just right for your ride. Their composite construction features chrome plated steel rims mated to aluminum alloy centers--no polishing is needed, leaving you more time for cruising! And these 61 Series original S/S designs afford you the advantage of direct bolt fitment in various widths and diameters. Give your muscle updated versions of the most popular wheels ever--Cragar 61C Series S/S Super Sport wheels.
( 279 )
$306.13
Powermaster Ultra Torque starters live up to their name by delivering 250+ ft.-lbs. of torque. They feature a machined aluminum adjustable mounting block, work with most oversized kickout oil pans, and work great for big cubic inch engines. The starters use a 2.5 kW, in a 3.4 hp motor.
( 222 )
$292.99
—
$394.99
Swapping a GM LS based engine just got a lot easier! Summit Racing™ Pro LS cast aluminum oil pans are specifically designed to install an LS engine in a variety of GM muscle car and truck chassis. These pans offer OEM fitment, oil filter mounting, oil cooler provisions, and use OEM-style gaskets. They are manufactured from cast aluminum to provided proper structural rigidity and heat dissipation. The pans include a baffle, oil pickup tube, sump plug, oil filter stud, and oil passage cover.
( 28 )
$359.99
—
$399.99
Summit Racing™ performance fit radiators feature a quality aluminum core and are designed to fit your vehicle. They offer improved heat dissipation over OEM radiators, and some models are available with a built-in automatic transmission cooler. Modifications may be required when installing Summit Racing™ performance fit radiators. Designed for use with electric fans, the OEM fan shroud is not compatible with these radiators in most applications.
( 1039 )
$256.99
—
$379.99
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 117 )
$379.95
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 243 )
$403.95
—
$499.95
Patented ATI Super Damper standard harmonic balancers are the only crankshaft dampers designed exclusively for high performance engines. Inner and outer shells are available in aluminum or steel, and contain a steel inertia weight. The inertia weights have six (2-ring design) or eight (3-ring design) computer-machined grooves to retain the proper durometer O-rings (dyno tested for each application). Whether you race or just drive on the street, ATI harmonic balancers are the perfect choice. Features include: * Eliminates torsional crankshaft vibrations * Exceeds SFI 18.1 specs * Black zinc chromate finished * OEM equipment on a variety of crate engines * Tunable, rebuildable, and extremely efficient at all rpm * Laser-engraved 360 degree timing marks * Supercharger and power steering drive pulleys available for some applications
( 223 )
$309.95
—
$399.95
Summit Racing™ classic OEM radiators are designed to give you top performance cooling, while fitting your vehicle's mounts, so your ride can have a new radiator without having to modify brackets and fittings. The radiators are available in various styles and sizes to best fit your application or engine bay design.
( 410 )
$332.99
Auto Metal Direct hoods are manufactured from steel and are fully coated with EDP to keep the hoods looking great on your ride for a long time. So, if your ride's hood has rust, dents, body filler, or hood scoop holes, just replace it with a brand new, factory-style hood from Auto Metal Direct. All underside bracing and brackets are faithful reproductions of the originals to offer an exceptional fit, authentic look, and value to your vehicle. Don't be fooled by cheap reproductions--demand AMD!
( 605 )
$464.99
Summit Racing™ steel transmission crossmembers allow you to run a true dual-exhaust system with most popular GM transmissions. They have a patented double-hump design, so you don't have to compromise ground clearance by running pipes under the crossmember, and they're a complete bolt-on deal—no custom fabricating or realignment is needed. The parts are made from 1/8 in. thick boxed tubing to handle the frame-twisting power of big blocks. Order the crossmember recommended for your vehicle and transmission application.
( 571 )
$275.99
—
$381.99
Tilton severe-duty Super Starters pack a lot of power into a compact package--a hefty 3.0 hp, in fact. That's enough to crank over just about anything, and they only weigh about 12 lbs. They feature full ball-bearing or needle-bearing construction that's little affected by heat or cold, and most are "clockable" for multiple choices of solenoid positioning. These starters are recommended for engines over 400 c.i.d., as well as high-compression V8s.
( 31 )
$420.75
You just can't go wrong with the timeless styling of Cragar 08/61 S/S Super Sport wheels. From the 5-spoke pattern to the beautiful chrome finish, these 08/61 SS Super Sport wheels are the classics that started it all. Their composite construction features chrome plated steel rims mated to aluminum alloy centers--no polishing is needed, leaving you more time for cruising! Cragar offers a variety of sizes in both standard and reverse offset models and includes larger-diameter models for today's high performance tires and suspensions. Wheels made to fit nearly any combination, easy maintenance, and head-turning looks are what have made Cragar 08/61 S/S Super Sport wheels so popular.
( 380 )
$306.13
Lares new steering gears are manufactured from the same high-quality materials as your original components to provide long-lasting performance. These new steering gear units (not remanufactured) are engineered to OE specifications to ensure proper fit, form, and function, and each new unit is then inspected, adjusted accordingly and filled with a high-quality grease, so they arrive to you ready for installation. Simply verify fitment, and order your new Lares steering gear that's designed to fit your application.
( 81 )
$351.99
—
$402.99
Patriot Clippster headers feature longer primaries that exit toward the rear of the engine compartment to clear steering and suspension components. They have slightly shorter primaries than full length headers and provide ground clearance on lowered vehicles. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes. * Raw steel is available for individual customizing
( 352 )
$314.95
—
$500.95
Holley GM LT retrofit oil pans provide maximum clearance to the chassis and ground; plus, they provide OEM fitment for durability and proper sealing. GM's Gen V LT direct-injected engines are finding their way into a large variety of vehicles. They make great power, they're durable, and reliable, but unfortunately, the factory oil pans don't always fit--or they hang too low for today's hot rods. Holley LT retrofit oil pans are designed to help! Features include: * Cast and machined aluminum * Allow for up to 4.00 in. crankshaft stroke * Can be used anywhere a GM F-body oil pan can be used * Provide OEM fitment--oil filter mounting, OEM engine NVH suppression, OEM flange sealing, proper structural rigidity, and OEM bellhousing attachments * Traditional high-quality cast aluminum appearance with clean exterior styling * Provide maximum clearance for vehicles where the steering linkage is behind the engine crossmember * Oil cooler port provision * 1/2 in. NPT port--ideal for turbo oil return or PCV oil return * Drag race version includes special hinged door baffles and pickup
( 33 )
$430.95
—
$527.95
QA1 Pro Coil shocks and struts are designed to change over your OEM suspension to an adjustable coilover design. They include two high performance shocks or struts and all necessary mounting hardware. QA1 Pro Coil shocks and struts are available for street use in single or double-adjustable styles and also come in a full drag race version built only for the race track.
( 25 )
$260.95
—
$362.95
Want to improve the performance of your ride, without a major hassle? QA1 Stocker Star shocks could be your answer. They're lightweight, fully adjustable, and bolt right in. They rely on deflective-disc valving and have 18 levels of damping, which you can select at the twist of a knob—with the shocks in place on the vehicle. Stocker Stars have 5/8 in. hard-chromed centerless-ground piston rods, double-lip wiper seals, and one-piece, forged, machined-aluminum bodies that are bright-anodized for great looks and durability. Each shock is dyno-tested for consistency and comes with chrome or zinc plated mounting hardware. Order the model recommended for your vehicle application.
( 331 )
$302.95
On Sale
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 35 )
$463.95
—
$485.95
On Sale
PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor II® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing, and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 337 )
$364.95
—
$410.95
$328.46
—
$369.86
Sometimes you just want steel! Lightweight alloy flywheels can offer substantial benefits for certain situations, but sometimes they're just not your cup of tea. Maybe you're on a budget, maybe you're running a heavy drag car, or maybe you just don't need those benefits. If that's the case, McLeod has the answer. Their steel flywheels deliver all of the strength and reliability that you need, at a substantially lower price. They're neutrally balanced, but are drilled to accept balance weights for use on externally balanced engines. McLeod steel flywheels available for a wide variety of large and small engines.
( 99 )
$295.00
—
$495.00
On Sale
Hooker Competition headers are designed for stock or mildly modified engines for the value-conscious buyer. Made from durable 16-gauge steel, Competition headers feature 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 926 )
$269.95
—
$283.95
For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street headers are available uncoated or in Black Maxx or their polished HTC thermal ceramic coated finishes and, as an added bonus, they also come with all necessary gaskets and mounting hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 2331 )
$269.99
—
$519.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
